Hydrothermal Synthesis, Formation Mechanism and Photocatalytic Activity of SnO2/BiOBr
Tiantian Xu,Zhanyao Gao,Yabin Jin,Wenhan Song,Bo Liu,Binghua Yao
DOI: https://doi.org/10.1002/slct.202304559
2024-02-29
ChemistrySelect
Abstract:SnO2/BiOBr photocatalytic materials were successfully prepared by hydrothermal synthesis in this study. X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray energy spectroscopy (XPS) and ultraviolet‐visible diffuse reflectance spectroscopy (UV‐Vis DRS) were used to characterize samples. After characterization, the possible formation mechanism of SnO2/BiOBr was proposed. It was concluded that when the molar ratio of SnO2 to BiOBr was 1 : 4, the band gap of the prepared SnO2/ BiOB‐4 photocatalyst was shortened to 2.78 eV, and the visible light absorption range was greatly improved. Degradation experiment indicated that the degradation rates for norfloxacin of SnO2/BiOB‐4 reached 85.9 %, which was about 50 and 65 percentage points higher than that of pure BiOBr and SnO2, respectively. The reaction rate was 4.3 times that of BiOBr. The reason why the photocatalytic activity is enhanced is that after the combination of the two monomers, the energy band structure is optimized, the effective separation of photogenerated electrons and holes are promoted, which promotes the effective separation of the photogenerated electrons and holes, and more ⋅O2− and h+ active substances are generated, improving the overall oxidation performance. SnO2/BiOBr photocatalytic materials were successfully synthesized by hydrothermal method with BiOBr as the precursor. X‐ray diffraction studies confirmed that BiOBr and SnO2 were successfully combined. After characterization, we proposed a possible formation mechanism for SnO2/BiOBr. The degradation experiment showed that the degradation rate of norfloxacin using SnO2/BiOB‐4 reached 85.9 %, which was approximately 50 and 65 percentage points higher than that of pure BiOBr and SnO2, respectively. The reaction rate was 4.3 times that of BiOBr. Based on the analysis of the degradation mechanism, the improved photocatalytic performance may be attributed to the optimized energy band structure resulting from the combination of the two monomers. This promotes the effective separation of photogenerated electrons and holes, leading to the generation of more active substances such as ⋅O2− and h+. As a result, the oxidation capacity is enhanced.
chemistry, multidisciplinary