Research and Development of Antifouling Marine Coatings

Hui-jun LI,Guo-jian WANG

DOI: https://doi.org/10.3969/j.issn.0253-4312.2005.03.013

2005-01-01

Abstract:This article has briefly described the development history of antifouling marine coatings, and predicted the future prospect of a couple of new nontoxic antifouling coatings.

What problem does this paper attempt to address?

Research Strategies to Develop Environmentally Friendly Marine Antifouling Coatings

Yunqing Gu,Lingzhi Yu,Jiegang Mou,Denghao Wu,Maosen Xu,Peijian Zhou,Yun Ren

DOI: https://doi.org/10.3390/md18070371

2020-07-18

Marine Drugs

Abstract:There are a large number of fouling organisms in the ocean, which easily attach to the surface of ships, oil platforms and breeding facilities, corrode the surface of equipment, accelerate the aging of equipment, affect the stability and safety of marine facilities and cause serious economic losses. Antifouling coating is an effective method to prevent marine biological fouling. Traditional organic tin and copper oxide coatings are toxic and will contaminate seawater and destroy marine ecology and have been banned or restricted. Environmentally friendly antifouling coatings have become a research hotspot. Among them, the use of natural biological products with antifouling activity as antifouling agents is an important research direction. In addition, some fouling release coatings without antifoulants, biomimetic coatings, photocatalytic coatings and other novel antifouling coatings have also developed rapidly. On the basis of revealing the mechanism of marine biofouling, this paper reviews the latest research strategies to develop environmentally friendly marine antifouling coatings. The composition, antifouling characteristics, antifouling mechanism and effects of various coatings were analyzed emphatically. Finally, the development prospects and future development directions of marine antifouling coatings are forecasted.

pharmacology & pharmacy,chemistry, medicinal
Progress in Marine Antifouling Coatings: Current Status and Prospects

Liang Li,Heting Hong,Jingyi Cao,Yange Yang

DOI: https://doi.org/10.3390/coatings13111893

IF: 3.236

2023-11-04

Coatings

Abstract:The shipping industry is vital to global trade. Unfortunately, this industry is negatively impacted on a large scale by biofouling, a process whereby unwanted organisms accumulate on submerged surfaces, massively affecting traveling speed and fuel consumption. Fortunately, antifouling coatings have been developed to combat this problem. This review summarizes the process of biofouling and briefly discusses the history of antifouling coating development. Moreover, eight major antifouling coatings are reviewed, including bionic microstructure, self-polishing, fouling and desorption, zwitterionic polymer, self-assembled thin-layer, liquid-smooth surface, conductive, and photocatalytic antifouling coatings. The technical principles, innovation, and advancement of each coating are expounded, and the relevant research progress is discussed. Finally, the remaining issues and challenges in antifouling coatings are discussed, along with their prospects.

materials science, multidisciplinary,physics, applied, coatings & films
Research Progress of Natural Products and Their Derivatives in Marine Antifouling

Wenwen Zhao,Zhiqiang Wu,Yanming Liu,Pan Dai,Guojuan Hai,Feng Liu,Yu Shang,Zhongyue Cao,Wufang Yang

DOI: https://doi.org/10.3390/ma16186190

IF: 3.4

2023-09-14

Materials

Abstract:With the increasing awareness of environmental protection, it is necessary to develop natural product extracts as antifouling (AF) agents for alternatives to toxic biocides or metal-based AF paints to control biofouling. This paper briefly summarizes the latest developments in the natural product extracts and their derivatives or analogues from marine microorganisms to terrestrial plants as AF agents in the last five years. Moreover, this paper discusses the structures–activity relationship of these AF compounds and expands their AF mechanisms. Inspired by the molecular structure of natural products, some derivatives or analogues of natural product extracts and some novel strategies for improving the AF activity of protective coatings have been proposed as guidance for the development of a new generation of environmentally friendly AF agents.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Review on Marine Antifouling Coatings

LIU Jiao,HE Qiwei,CHEN Hong,CHEN Yu,ZHANG Zhao,ZHANG Jianqing

DOI: https://doi.org/10.11902/1005.4537.2014.020

2015-01-01

Abstract:In this review, the major anti-fouling strategies based on physical-, chemical- and biolog- ical-methods are presented, while their advantages and disadvantages are analyzed. Then fouling re- lease-, conductive antifouling- and silicate antifouling-coatings are described in detail. It is pro- posed that the fouling release coatings which combine the nanotechnology with the bionic technolo- gy will be one of the most important antifouling approaches.
Bioinspired marine antifouling coatings: Status, prospects, and future

Huichao Jin,Limei Tian,Wei Bing,Jie Zhao,Luquan Ren

DOI: https://doi.org/10.1016/j.pmatsci.2021.100889

IF: 48.165

2022-02-01

Progress in Materials Science

Abstract:Marine biofouling has negatively affected human sailing since ancient times. Traditional antifouling coatings were banned worldwide in 2003 due to their toxicity towards nontarget marine organisms. Consequently, the development of sustainable nontoxic antifouling coatings is urgent. Novel and exciting discoveries from nature have inspired us to design high-efficiency, environmentally compatible, and cost-effective antifouling coatings. This review focuses on six major bioinspired antifouling strategies: micro/nanostructured surfaces, natural antifoulants, bioinspired hydrogels, slippery liquid-infused porous surfaces, bioinspired dynamic surfaces, and zwitterionic coatings. This review provides insight into antifouling mechanisms, fabrication methods, and critical issues in the development of the six bioinspired antifouling strategies. This review also discusses current problems and future trends of bioinspired antifouling coatings. In practical applications, no single bioinspired antifouling approach can be identified as a universal antifouling strategy. This review introduces the multifunctional bioinspired antifouling strategy—a recent development that may address the existing problems in the single bioinspired strategy. The multifunctional strategy combines the synergistic strengths of multiple antifouling strategies, potentially enhancing the antifouling capabilities and lifespan of the coatings. This review may open a new horizon for the future development of bioinspired marine antifouling coatings.

materials science, multidisciplinary
Recent Progress in Fabrications, Mechanisms and Developments of Photo-Responsive Marine Antifouling Coatings

Jiahuan Liu,Qiang Li,Fanyu Meng,Tianli Zhang,Feng Gao,Xiaoli Zhan,Quan Liu,Qinghua Zhang

DOI: https://doi.org/10.1016/j.porgcoat.2023.108070

IF: 6.6

2024-01-01

Progress in Organic Coatings

Abstract:The surfaces of marine engineering equipment immersed in the sea are inevitably inhabited by various marine organisms, which causes severe economic and environmental problems. Therefore, it is extremely critical to take effective measures to prevent surface biofouling. Using antifouling coatings is the most effective and promising method for their convenience and low cost compared with others. Since 17th century, marine antifouling coatings were designed to kill or repel organisms by releasing toxic metal ions, causing serious hazards to marine environment. As a result, it is of significant need to develop environmentally friendly coatings. Intelligent coatings, triggered from their surrounding environment, has garnered increasing attention due to releasing little pollutants. Among the available external stimuli such as temperature, light, pH, and others, light has excellent characteristics such as environmental protection, great controllability, and immediacy. Hence, photo-responsive coatings have become a current research hotspot. This work summarized the fabrications, mechanisms and developments of photo-responsive coatings in marine antifouling based on organic, inorganic and organic/inorganic coatings, providing a systematic, innovative and enlightening toolkit for readers.
Technologies in Marine Antifouling and Anti-Corrosion Coatings: A Comprehensive Review

Hua Liang,Xiaolong Shi,Yanzhou Li

DOI: https://doi.org/10.3390/coatings14121487

IF: 3.236

2024-11-29

Coatings

Abstract:With the rapid development of marine engineering, effective antifouling and anti-corrosion technologies are essential for ensuring the safety and longevity of marine facilities. This review synthesizes current research on various coating technologies designed to combat marine biological fouling and corrosion. It analyzes the causes of marine biological fouling and corrosion, discusses their potential impacts on the safety of ships and marine structures, and emphasizes the need for effective protective systems. The review covers current antifouling coating technologies, including the preparation of low-surface-energy coatings, conductive coatings, biomimetic coatings, polysiloxane coatings, polyurea coatings, epoxy coatings, polyurethane coatings, and high-entropy alloy coatings. Anti-corrosion coatings are also discussed, with a focus on the characteristics of epoxy, polyurethane, and polyurea coatings, as well as metal-based coatings, alongside their corrosion resistance in marine environments. Based on existing research, the review summarizes ongoing challenges in marine antifouling and anti-corrosion coating technologies, and offers perspectives on future research directions and technological developments.

materials science, multidisciplinary,physics, applied, coatings & films
Recent Developments and Practical Feasibility of Polymer‐Based Antifouling Coatings

Anna M. C. Maan,Anton H. Hofman,Wiebe M. Vos,Marleen Kamperman

DOI: https://doi.org/10.1002/adfm.202000936

IF: 19

2020-06-02

Advanced Functional Materials

Abstract:<p>While nature has optimized its antifouling strategies over millions of years, synthetic antifouling coatings have not yet reached technological maturity. For an antifouling coating to become technically feasible, it should fulfill many requirements: high effectiveness, long‐term stability, durability, ecofriendliness, large‐scale applicability, and more. It is therefore not surprising that the search for the perfect antifouling coating has been going on for decades. With the discovery of metal‐based antifouling paints in the 1970s, fouling was thought to be a problem of the past, yet its untargeted toxicity led to serious ecological concern, and its use became prohibited. As a response, research shifted focus toward a biocompatible alternative: polymer‐based antifouling coatings. This has resulted in numerous advanced and innovative antifouling strategies, including fouling‐resistant, fouling‐release, and fouling‐degrading coatings. Here, these novel and exciting discoveries are highlighted while simultaneously assessing their antifouling performance and practical feasibility.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
The Development of a Marine Natural Product-based Antifouling Paint

J Grant Burgess,Kenneth G Boyd,Evelyn Armstrong,Zhong Jiang,Liming Yan,Matz Berggren,Ulrika May,Tony Pisacane,Åke Granmo,David R Adams

DOI: https://doi.org/10.1080/0892701031000061778

2003-01-01

Biofouling

Abstract:Problems with tin and copper antifouling compounds have highlighted the need to develop new environmentally friendly antifouling coatings. Bacteria isolated from living surfaces in the marine environment are a promising source of natural antifouling compounds. Four isolates were used to produce extracts that were formulated into ten water-based paints. All but one of the paints showed activity against a test panel of fouling bacteria. Five of the paints were further tested for their ability to inhibit the settlement of barnacle larvae, Balanus amphitrite, and algal spores of Ulva lactuca, and for their ability to inhibit the growth of U. lactuca. Two paints caused a significant decrease in the number of settled barnacles. One paint containing extract of Pseudomonas sp. strain NUDMB50-11, showed excellent activity in all assays. The antifouling chemicals responsible for the activity of the extract were isolated, using bioassay guided fractionation, and their chemical structures determined.

biotechnology & applied microbiology,marine & freshwater biology
Review of Progress in Marine Anti-Fouling Coatings: Manufacturing Techniques and Copper- and Silver-Doped Antifouling Coatings

Xiaolong Shi,Hua Liang,Yanzhou Li

DOI: https://doi.org/10.3390/coatings14111454

IF: 3.236

2024-11-21

Coatings

Abstract:Marine biofouling presents numerous challenges, including increased drag, reduced efficiency, and ecological imbalance. This review presents an overview of recent advances in antifouling coatings. First, essential preparation techniques such as cold spray, plasma spray, magnetron sputtering, and laser cladding are introduced, including the specific characteristics of each method. Next, the antifouling performance of Cu-doped and Ag-doped coating is analyzed. Emphasis is placed on the differences in coating composition, preparation methods, and their effects on antifouling and anticorrosion properties. The future development of antifouling technologies is also discussed, emphasizing the creation of multifunctional coatings, the optimization of coating microstructures for better performance, and the advancement of sustainable materials to minimize environmental impact.

materials science, multidisciplinary,physics, applied, coatings & films
INTERGRATED DESIGN AND STUDY OF MARINE ANTIFOULING POLYMER MATERIALS

Xie Laiyong,Hong Fei,Liu Jianhong,Zhang Guangzhao,Wu Chi

DOI: https://doi.org/10.3724/sp.j.1105.2012.11223

2012-01-01

Abstract:To solve biofouling problems,different antifouling paints have been designed,developed and practically applied.Here we briefly introduce the nature and process of biofouling;review several currently used common strategies in the development of different biocidal antifouling coatings;illustrate how we are able to combine a number of existing approaches into some integrated novel designs;and finally report some of our recent RD progresses in direction.
Research Progress on Using Modified Hydrogel Coatings as Marine Antifouling Materials

Ying Wang,Xiaohong Zhou,Lingyan He,Xiangkai Zhou,Yantian Wang,Peijian Zhou

DOI: https://doi.org/10.3390/md22120546

2024-12-05

Marine Drugs

Abstract:The adhesion of marine organisms to marine facilities negatively impacts human productivity. This phenomenon, known as marine fouling, constitutes a serious issue in the marine equipment industry. It increases resistance for ships and their structures, which, in turn, raises fuel consumption and reduces ship speed. To date, numerous antifouling strategies have been researched to combat marine biofouling. However, a multitude of these resources face long-term usability issues due to various limitations, such as low adhesion quality, elevated costs, and inefficacy. Hydrogels, exhibiting properties akin to the slime layer on the skin of many aquatic creatures, possess a low frictional coefficient and a high rate of water absorbency and are extensively utilized in the marine antifouling field. This review discusses the recent progress regarding the application of hydrogels as an important marine antifouling material in recent years. It introduces the structure, properties, and classification of hydrogels; summarizes the current research status of improved hydrogels in detail; and analyzes the improvement in their antifouling properties and the prospects for their application in marine antifouling.

pharmacology & pharmacy,chemistry, medicinal
Antifouling Technology Trends in Marine Environmental Protection

Limei Tian,Yue Yin,Wei Bing,E. Jin

DOI: https://doi.org/10.1007/s42235-021-0017-z

IF: 2.995

2021-03-01

Journal of Bionic Engineering

Abstract:Abstract Marine fouling is a worldwide problem, which is harmful to the global marine ecological environment and economic benefits. The traditional antifouling strategy usually uses toxic antifouling agents, which gradually exposes a serious environmental problem. Therefore, green, long-term, broad-spectrum and eco-friendly antifouling technologies have been the main target of engineers and researchers. In recent years, many eco-friendly antifouling technologies with broad application prospects have been developed based on the low toxicity and non-toxicity antifouling agents and materials. In this review, contemporary eco-friendly antifouling technologies and materials are summarized into bionic antifouling and non-bionic antifouling strategies (2000–2020). Non-bionic antifouling technologies mainly include protein resistant polymers, antifoulant releasing coatings, foul release coatings, conductive antifouling coatings and photodynamic antifouling technology. Bionic antifouling technologies mainly include the simulated shark skin, whale skin, dolphin skin, coral tentacles, lotus leaves and other biology structures. Brief future research directions and challenges are also discussed in the end, and we expect that this review would boost the development of marine antifouling technologies.

robotics,engineering, multidisciplinary,materials science, biomaterials
Preparation and Properties of Environmentally Friendly Marine Antifouling Coatings Based on a Collaborative Strategy

Xuan Wang,Jian Yang,Xiaohui Jiang,Liangmin Yu

DOI: https://doi.org/10.1021/acs.langmuir.2c00612

IF: 3.9

2022-05-17

Langmuir

Abstract:Long-term and green marine antifouling coatings are an important means to prolong the service life of ships and other marine instruments and equipment. To accomplish this, we prepared three new green and high-efficiency antifouling coatings containing phthalimide derivatives inspired by capsaicin (PDIC-AC) by using a collaborative strategy that incorporates self-polishing, fouling repelling, and antifouling properties. Static simulation tests confirmed that the zinc acrylate resin of the PDIC-AC has excellent self-polishing properties due to changes in the roughness, surface free energy, and mass loss. Antifouling tests demonstrated that both PDIC and PDIC-AC possess efficient antibacterial and anti-algal effects. Moreover, marine field tests showed that the PDIC-AC are highly antifouling for at least 9 months, and their antifouling effect is similar to that of an antifouling coating with chlorothalonil (CT-AC). The collaborative strategy in this study can be used to research and develop long-term environmentally friendly antifouling coatings.

chemistry, multidisciplinary, physical,materials science
Modification, Degradation and Evaluation of a Few Organic Coatings for Some Marine Applications

Guang-Ling Song,Zhenliang Feng

DOI: https://doi.org/10.3390/cmd1030019

2020-12-21

Corrosion and Materials Degradation

Abstract:Organic coatings for marine applications must have great corrosion protection and antifouling performance. This review presents an overview of recent investigations into coating microstructure, corrosion protection performance, antifouling behavior, and evaluation methods, particularly the substrate effect and environmental influence on coating protectiveness, aiming to improve operational practice in the coating industry. The review indicates that the presence of defects in an organic coating is the root cause of the corrosion damage of the coating. The protection performance of a coating system can be enhanced by proper treatment of the substrate and physical modification of the coating. Environmental factors may synergistically accelerate the coating degradation. The long-term protection performance of a coating system is extremely difficult to predict without coating defect information. Non-fouling coating and self-repairing coatings may be promising antifouling approaches. Based on the review, some important research topics are suggested, such as the exploration of rapid evaluation methods, the development of long-term cost-effective antifouling coatings in real marine environments.
Organic–Inorganic Composite Antifouling Coatings with Complementary Bioactive Effects

Huixian Kong,Jinhui Fu,Rentong Yu,Mingyu Wang,Jinchun Tu,Qiang Wu,Xuewei Zhang,Lina Niu,Kexi Zhang

DOI: https://doi.org/10.3390/coatings14060741

IF: 3.236

2024-06-13

Coatings

Abstract:Traditional antifouling coatings are toxic to marine life, which makes developing new environmentally friendly marine antifouling coatings imperative. Antifouling coatings that are nonadhesive and antimicrobial may provide an effective approach to achieving this goal. In this study, an organic–inorganic composite coating consisting of fluorinated polyurethane (FPU) and carboxymethyl chitosan–zinc oxide (CMC–ZnO) was prepared to achieve antifouling. The coating took advantage of the complementary bioactive effects of the low surface energy of FPU and the antimicrobial properties of CMC–ZnO. The coating showed good antifouling performance, with a survival rate for Escherichia coli of 3.15% and that for Staphylococcus aureus of 3.97% and an anti-protein adsorption rate of more than 90%. This study provides a simple method for preparing antifouling coatings using nonpolluting raw materials with minimal adverse effects on marine environments.

materials science, multidisciplinary,physics, applied, coatings & films
Proof of Concept of Natural and Synthetic Antifouling Agents in Coatings

Daniela Pereira,Joana R. Almeida,Honorina Cidade,Marta Correia-da-Silva

DOI: https://doi.org/10.3390/md22070291

2024-06-25

Marine Drugs

Abstract:Marine biofouling, caused by the deposition and accumulation of marine organisms on submerged surfaces, represents a huge concern for the maritime industries and also contributes to environmental pollution and health concerns. The most effective way to prevent this phenomenon is the use of biocide-based coatings which have proven to cause serious damage to marine ecosystems. Several research groups have focused on the search for new environmentally friendly antifoulants, including marine and terrestrial natural products and synthetic analogues. Some of these compounds have been incorporated into marine coatings and display interesting antifouling activities caused by the interference with the biofilm-forming species as well as by the inhibition of the settlement of macroorganisms. This review highlights the proof-of-concept studies of emerging natural or synthetic antifouling compounds in coatings, from lab-made to commercial ones, performed between 2019 and 2023 and their results in the field or in in vivo laboratorial tests.

pharmacology & pharmacy,chemistry, medicinal
Research Progress of Marine Anti-corrosion and Wear-resistant Coating

Wenle Pei,Xiaoliang Pei,Zhuangzhuang Xie,Jianmei Wang

DOI: https://doi.org/10.1016/j.triboint.2024.109864

IF: 5.62

2024-06-08

Tribology International

Abstract:The marine environment has caused significant economic losses to marine engineering machinery, and the exploitation of simple, environmentally friendly, economical, mechanically durable marine protective coatings is imminent. This article provides a comprehensive review of the recent research advancements in marine metal protective coatings, such as superhydrophobic coatings, micro-arc oxidation coatings, laser cladding coatings, and graphene nano-anticorrosion coatings. The review explores their respective anticorrosion strategies, anticorrosion and wear-resistant mechanisms, preparation processes, and influencing factors. Ultimately, it summarizes the challenges in the practical application of marine coatings in marine corrosion protection, which provides an outlook on the future direction of coating development. The application of marine anticorrosion and wear-resistant coatings provides reliable protection to ensure the regular operation of marine resource development facilities.

engineering, mechanical
Continuous positive airway pressure delivery interfaces for obstructive sleep apnoea.

C. Chai-Coetzer,Anna Pathinathan,B. Smith

DOI: https://doi.org/10.1002/14651858.CD005308.PUB2

IF: 8.4

2006-10-18

Cochrane Database of Systematic Reviews

Abstract:BACKGROUND Continuous positive airway pressure (CPAP) is the mainstay of therapy for moderate to severe obstructive sleep apnoea (OSA). However, compliance with CPAP has been less than ideal. There are many different CPAP interfaces now available for the treatment of OSA. The type of CPAP delivery interface is likely to influence a patient's acceptance of CPAP therapy and long term compliance. OBJECTIVES This review aims to compare the efficacy of the various CPAP delivery interfaces available for the treatment of obstructive sleep apnoea. SEARCH STRATEGY Searches were carried out on the Cochrane Airways Group Specialised Register, CENTRAL, MEDLINE, EMBASE & CINAHL up to January 2006. SELECTION CRITERIA All randomised, controlled trials comparing different forms of CPAP delivery interface for the treatment of OSA were considered for inclusion. DATA COLLECTION AND ANALYSIS Two reviewers independently assessed studies for inclusion into the review and extracted data. Attempts were made to contact study authors to obtain additional, unpublished data. MAIN RESULTS A total of four studies fulfilled the inclusion criteria. Two studies compared nasal mask with the Oracle oral mask and showed no significant difference in compliance at one month (mean difference [95%CI]: 0.17 hours per night [-0.54 to 0.87]). There were also no significant differences in any of the physiological parameters (e.g. AHI, arousal index, minimum oxygen saturation), Epworth Sleepiness Scale (ESS), or symptoms of OSA. A single study comparing nasal mask with nasal pillows showed a significant difference in compliance when expressed as the percentage of days used in favour of nasal pillows (nasal pillows mean+/-SD 94.1+/-8.3%; nasal mask 85.7+/-23.5%, P=0.02), however there were no significant differences in the mean daily use for all days or when use was greater than 0 minutes per day. Nasal pillows were also associated with fewer overall adverse effects (P<0.001) and greater interface satisfaction (P=0.001). No significant differences in AHI, ESS or quality of life scores were seen. One study comparing nasal mask with face mask showed that compliance was significantly greater with use of a nasal mask (mean difference 1.0 hour per night [95%CI 0.3-1.8]). Nasal mask was also associated with significantly lower ESS scores and was the preferred interface in almost all patients. AUTHORS' CONCLUSIONS Due to the limited number of studies available comparing various interface types, the optimum form of CPAP delivery interface remains unclear. The results of our review suggest that nasal pillows or the Oracle oral mask may be useful alternatives when a patient is unable to tolerate conventional nasal masks. The face mask can not be recommended as a first line interface, but may be considered if nasal obstruction or dryness limits the use of a nasal mask. Further randomised studies comparing the different forms of CPAP delivery interface now available for the treatment of OSA, in larger groups of patients and for longer durations, are required.
Functional polymer materials for modern marine biofouling control

Haoyi Qiu,Kang Feng,Anna Gapeeva,Kerstin Meurisch,Sören Kaps,Xia Li,Liangmin Yu,Yogendra Kumar Mishra,Rainer Adelung,Martina Baum

DOI: https://doi.org/10.1016/j.progpolymsci.2022.101516

IF: 31.281

2022-04-01

Progress in Polymer Science

Abstract:Marine biofouling is a well-known massive problem: within the shortest time, ship hulls and other man-made submerged surfaces are inevitably populated by various marine organisms. Marine biofouling causes severe economic and environmental problems. Thus, effective biofouling control on submerged surfaces is of utmost importance. Since the middle of the 20th century, scientists and engineers have developed antifouling coatings mainly based on the continuous release of toxic metal ions and accompanying booster biocides to repel or kill organisms approaching the surface. However, these coatings caused serious harm to non-target organisms and the ocean. Therefore, the development of environmentally friendly alternative coatings is an urgent need, and research in this field is growing rapidly. This review includes concise basic theory from biology, chemistry, and physics. It provides an introduction into the biofouling formation, as well as physicochemical surface properties that can be manipulated to achieve an effective biofouling control. Furthermore, a complete overview of the currently developed biofouling control coatings is presented and summarized. This overview includes coatings based on surface wettability, self-renewable coatings, coatings containing antifouling agents, switchable coatings, and biomimetic coatings.

polymer science

Research and Development of Antifouling Marine Coatings

Research Strategies to Develop Environmentally Friendly Marine Antifouling Coatings

Progress in Marine Antifouling Coatings: Current Status and Prospects

Research Progress of Natural Products and Their Derivatives in Marine Antifouling

Review on Marine Antifouling Coatings

Bioinspired marine antifouling coatings: Status, prospects, and future

Recent Progress in Fabrications, Mechanisms and Developments of Photo-Responsive Marine Antifouling Coatings

Technologies in Marine Antifouling and Anti-Corrosion Coatings: A Comprehensive Review

Recent Developments and Practical Feasibility of Polymer‐Based Antifouling Coatings

The Development of a Marine Natural Product-based Antifouling Paint

Review of Progress in Marine Anti-Fouling Coatings: Manufacturing Techniques and Copper- and Silver-Doped Antifouling Coatings

INTERGRATED DESIGN AND STUDY OF MARINE ANTIFOULING POLYMER MATERIALS

Research Progress on Using Modified Hydrogel Coatings as Marine Antifouling Materials

Antifouling Technology Trends in Marine Environmental Protection

Preparation and Properties of Environmentally Friendly Marine Antifouling Coatings Based on a Collaborative Strategy

Modification, Degradation and Evaluation of a Few Organic Coatings for Some Marine Applications

Organic–Inorganic Composite Antifouling Coatings with Complementary Bioactive Effects

Proof of Concept of Natural and Synthetic Antifouling Agents in Coatings

Research Progress of Marine Anti-corrosion and Wear-resistant Coating

Continuous positive airway pressure delivery interfaces for obstructive sleep apnoea.

Functional polymer materials for modern marine biofouling control