Abstract:Pyrolysis of challenging Indian and Finnish feedstocks, viz., rice straw, empty oil palm fruit bunch, pine bark, and birch bark, has been studied using analytical and applied pyrolysis reactors. Round-robin characterization of the feedstocks, including elemental analysis, proximate analysis, bomb calorimetry, and thermogravimetric analysis (TGA) was performed to generate robust data. Pyrolysis studies were carried out using an analytical micro pyrolyzer coupled with a gas chromatograph/mass spectrometer (Py-GC/MS), a single particle reactor (SPR), and a batch microwave pyrolysis reactor (MWP) to shed light on the influence of heating rate and mechanism on pyrolysis product yields and composition. The Py-GC/MS and SPR experiments were performed at 400, 500, and 600 °C, while the MWP experiments were carried out at 500 °C. The TGA results showed that the decomposition temperature ranges for the hemicellulose, cellulose, and lignin components of the biomasses overlapped to a certain extent. The condensable pyrolysis vapor ("bio-oil") yields obtained from pyrolysis of the samples in the SPR reached a maximum at 500 °C. However, the pyrolysis char yield decreased, and the CO and CO 2 gas yields increased with temperature in the temperature range of 400-600 °C. The bio-oil yields obtained from the MWP at 500 °C were low, and the char and CO and CO 2 gas yields were high compared to the corresponding yields obtained from the SPR at the same temperature. The low bio-oil yields and high biochar and CO and CO 2 gas yields from the MWP were attributed to the slow heating rate in the MWP. The Py-GC/MS analysis results revealed that the pyrolysates were mainly composed of linear and cyclic oxygenated hydrocarbons and phenolics. However, the bio-oils obtained from pyrolysis of the samples in the MWP composed primarily of phenolics. The results of the present work indicate that differences in the chemical composition of the biomass feedstocks (especially in the content of alkali and alkaline earth metals), the heating rates and the heating mechanisms played a major role in pyrolysis product yields and compositions.

Pyrolysis of pubescens for high value-added chemicals

Investigation on Kinetics of Bamboo Pyrolysis

Kinetics of Bamboo Pyrolysis

Fast Pyrolysis Product Distribution of Biopretreated Corn Stalk by Methanogen.

Catalytic thermal cracking of mixtures of bamboo waste and polypropylene

Effect of water and acid leaching on pyrolysis products of Phyllostachys pubescens

Effects of Biopretreatment on Pyrolysis Behaviors of Corn Stalk by Methanogen

Enhancement of the Production of Bio-aromatics From Bamboo Pyrolysis: Wet Torrefaction Pretreatment Coupled With Catalytic Fast Pyrolysis

Investigation of In-Situ and Ex-Situ Catalytic Pyrolysis Upgrading of Pine Using Thermo-Gravimetric Analysis and A Fixed-Bed Reactor System

Influences of the Reaction Temperature and Catalysts on the Pyrolysis Product Distribution of Lignocellulosic Biomass (Aspen Wood and Rice Husk)

Analytical and Applied Pyrolysis of Challenging Biomass Feedstocks: Effect of Pyrolysis Conditions on Product Yield and Composition

Preparation and analysis of pyroligneous liquor, charcoal and gas from lacquer wood by carbonization method based on a biorefinery process

Pyrolysis behaviors and product distribution of Shenmu coal at high heating rate: A study using TG-FTIR and Py-GC/MS

Pyrolysis Properties Of Potential Biomass Fuels In Southwestern China

Enhanced pyrolysis of lignocellulosic biomass by room-temperature dilute sulfuric acid pretreatment

Catalytic pyrolysis of bamboo residue and its extracted three main components over copper modified ZSM-5 for the production of aromatic hydrocarbons

Co-production of Biochar, Bio-oil, and Syngas from Tamarix Chinensis Biomass under Three Different Pyrolysis Temperatures

Analytical Pyrolysis of Soluble Bio-Tar from Steam Pretreatment of Bamboo by Using TG–FTIR and Py–GC/MS

Py-GC/MS Study on Tar Formation Characteristics of MSW Key Component Pyrolysis

Study on Pyrolysis Kinetics of Bamboo