Abstract:Extensive efforts have been made in designing large multiple-input multiple-output (MIMO) arrays. Nevertheless, improvements in conventional antenna characteristics cannot ensure significant MIMO performance improvement in realistic multipath environments. Array decorrelation techniques have been proposed, achieving correlation reductions by either tilting the antenna beams or shifting the phase centers away from each other. Hence, these methods are mainly limited to MIMO terminals with small arrays. To avoid such problems, this work proposes a decorrelation optimization technique based on phase correcting surface (PCS) that can be applied to large MIMO arrays, enhancing their MIMO performances in a realistic (non-isotropic) multipath environment. First, by using a near-field channel model and an optimization algorithm, a near-field phase distribution improving the MIMO capacity is obtained. Then the PCS (consisting of square elements) is used to cover the array’s aperture, achieving the desired near-field phase distribution. Two examples demonstrate the effectiveness of this PCS-based near-field optimization technique. One is a 1 × 4 dual-polarized patch array (working at 2.4 GHz) covered by a 2 × 4 PCS with 0.6λ center-to-center distance. The other is a 2 × 8 dual-polarized dipole array, for which a 4 × 8 PCS with 0.4λ center-to-center distance is designed. Their MIMO capacities can be effectively enhanced by 8% and 10% in single-cell and multi-cell scenarios, respectively. The PCS has insignificant effects on mutual coupling, matching, and the average radiation efficiency of the patch array, and increases the antenna gain by about 2.5 dB while keeping broadside radiations to ensure good cellular coverage, which benefits the MIMO performance of the array. The proposed technique offers a new perspective for improving large MIMO arrays in realistic multipath in a statistical sense.

Low-profile MIMO cube antenna based on characteristic mode theory

MIMO performance enhancement of MIMO arrays using PCS-based near-field optimization technique

A Compact Eighteen-Port Antenna Cube for MIMO Systems

Neutralization Line Decoupling Tri-Band Multiple-Input Multiple-Output Antenna Design

A Compact Planar MIMO Antenna System of Four Elements with Similar Radiation Characteristics and Isolation Structure

Low‐Profile Miniaturized Wideband Circularly Polarized Monopole and MIMO Antennas Using Characteristic Mode Analysis for Wireless Communication

Efficient Isolation of an MIMO Antenna Using Defected Ground Structure

Ultra-Compact Three-Port MIMO Antenna with High Isolation and Directional Radiation Patterns

Compact and Low Profile Co-Located MIMO Antenna Structure with Polarisation Diversity and High Port Isolation

Design and analysis of low-profile quad element wide band MIMO antenna with efficient isolation for C and X-band applications

Design of compact UWB antenna using characteristic mode analysis and its quad-port MIMO realization with novel isolation technique

Enhancing gain and isolation of a quad-element MIMO antenna array design for 5G sub-6 GHz applications assisted with characteristic mode analysis

Performance Examinations of Multi-User MIMO Systems with a Compact Antenna Cube

Miniaturized Broadband Dual-Polarized MIMO Antenna Array with Stable Radiation Pattern for Base Station Application

Low Mutual Coupling Tri-Polarized MIMO Slot Antennas

Compact ultrawideband MIMO slot antenna with high isolation

Dual-band millimetre wave MIMO antenna with reduced mutual coupling based on optimized parasitic structure and ground modification

High Isolation Compact Four-Port MIMO Antenna Systems with Built-in Filters As Isolation Structure

High Isolation MIMO Antenna Designed with Tightly Coupled Microstrip Patch Pairs

Introduction of the orthogonal mode via the polarization conversion parasitic structure for the isolation enhancement of MIMO patch antennas

Wideband Four-Port Single-Patch Antenna Based on the Quasi-TM 1/2,1/2 Mode for 5G MIMO Access-Point Application