Abstract:In this study, the level set (LS) and immersed boundary (IB) methods were integrated into a Navier–Stokes equation two-phase flow solver, to investigate wave-structure interactions and induced motions of floating bodies in two dimensions. The movement of an interfacial boundary of two fluids, even with severe free-surface deformation, is tracked by using the level set method, while an immersed object inside a fluid domain is treated by the IB method. Both approaches can be implemented by solving the Navier–Stokes equations for viscous laminar flows with embedded objects in fluids. For accurate treatment of the solid–liquid phase, appropriate source terms as forcing functions to take into account the hydrodynamic effects on the body boundaries are added into the governing equations. The integrated compact interfacial tracking techniques between the interfaces of gas–liquid phase and the solid–liquid phase allow the use of a combined Eulerian Cartesian and Lagrangian grid system. Problems related to the fluid-structure interactions and induced motions of a floating body, such as (a) a dam-break wave over a dry bed; (b) a dam-break wave over either a submerged semicircular or rectangular cylinder; (c) wave decomposition process over a trapezoid breakwater; (d) a free-falling wedge into a water body; and (e) wave packet interacting with a floating body are selected to test the model performance. For all cases, the computed results are found to agree reasonably well with published experimental data and numerical solutions. For the case of modeling wave decomposition process, improved solutions are obtained. The detailed features of flow phenomena described by the physical variables of velocity, pressure and vorticity are presented and discussed. The present two-phase flow model is proved to have the advantage of simulating the cases with induced severe interfacial oscillations and coupled gas (or air) motions where the single-phase model may miss the contributions of the air motions on the interfaces. Additionally, the proposed method with uses of the LS and IB methods is demonstrated to be able to achieve the reliable predictions of complex flow fields.

Numerical Simulation of Fluid–structure Interaction Using a Combined Volume of Fluid and Immersed Boundary Method

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

Study of Wave-Induced Mass Transport and Internal Mixing Based on a Two-Liquid VOF Model

A CIP-based Numerical Simulation of Freak Wave Impact on a Floating Body

Application of a Combined IB–VOF Model to Wave–structure Interactions

Numerical Simulation of Wave Interaction with Coastal Structures Using a CIP-based Method

Numerical Simulation of the Interaction Between Solitary Waves and Underwater Barriers Using a VPM–THINC/QQ-Coupled Model

Numerical Simulation of Dam-Break Flow Impacting a Stationary Obstacle by a CLSVOF/IB Method.

Numerical Simulation of Water Entry of Two-Dimensional Structures with Complex Geometry Using a CIP-based Model

Development of a Volume of Fluid Method for Computing Interfacial Incompressible Fluid Flows

High-fidelity Simulation of Regular Waves Based on Multi-Moment Finite Volume Formulation and THINC Method

Numerical and Experimental Study on A 2-D Floating Body under Extreme Wave Conditions

Numerical Study of Violent Impact Flow Using a CIP-Based Model

Two-Dimensional Free-Surface Flow Modeling for Wave-Structure Interactions and Induced Motions of Floating Bodies

Numerical Study of the Interaction Between an Internal Solitary Wave and a Submerged Extended Cylinder Using OpenFOAM

Numerical investigation of dynamic soil response around a submerged rubble mound breakwater

An immersed boundary method coupled non-hydrostatic model for free surface flow

Numerical Modeling of Wave Interactions with Coastal Structures by A Constrained Interpolation Profile/Immersed Boundary Method

Calculation of Hydrodynamic Forces Acting on a Submerged Moving Object Using Immersed Boundary Method

Simulations of Interaction Between Flow and a Thin Elastic Beam Using Cip-Based Model with Adaptive Mesh