Abstract:Polypropylene (PP) is still one of the most important general plastics, and it is of great significance to achieve high-performance PP materials. As a semicrystalline polymer, PP is essentially polymorphism. At least five polymorphs have been identified, i.e., alpha, beta, delta, d and quasi-hexagonal form. Among them, beta form is highly desirable, due to its excellent physical properties. However, beta crystals are hard to be obtained via common crystalline condition. The polymorphic modification by adding beta-nucleator (beta-NA) is a powerful method for achieving dominant beta form and thus tailoring the toughness and thermal stability of PP. In contrast to many past researches which focused on the roles of crystallinity and beta-phase content, a new methodology has been recently suggested which optimized the physical properties of PP by controlling beta-crystalline morphology. Some relevant studies include: (1) to assess the solubility and self-assembly behavior of beta-NA by using temperature gradient (g-T) field; (2) to control the beta-crystalline morphology by processing varables and beta-NA content, and receive super-high toughness and good heat stability; (3) to reveal the rule of stretching-induced porosity in the beta-PP films with different crystalline morphologies. beta-NA of low-molecular-weight is soluble in the melt of PP, which will self-assemble into supermolecular structures prior to the primary crystallization of PP during the cooling process. Such supermolecular structures act as templates for the guidance of PP crystallization, resulting in special crystalline morphologies. By using the g-T technique, the dependence of beta-NA solubility on molten temperature and nucleator loading could be clarified readily. Thus the crystalline morphology of beta-PP is controllable, and different morphologies, such as spherulite, transcrystallinity and flower-like aggregations, are achievable through adjusting the solubility and self-assembly behavior of beta-NA. Special crystalline morphology leads to a significant increase in the tensile ductility of beta-PP. Meanwhile, the heat distortion temperature and homogeneity of microporosity are also strongly dependent on beta-crystalline morphology. Obviously, the manipulation of crystalline morphology is a promising pathway to realize high-performance in crystalline polymers.

Characterization Of Thermally Treated Polypropylene Powders With Wide Sintering Window For Powder Bed Fusion Of Polymers

Intelligent optimization system for powder bed fusion of processable thermoplastics

β-Modification in heterogeneous polypropylene for laser-based powder bed fusion of polymers

Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors

Impact of polymer molecular weight and dispersity on the coalescence of polypropylene powders suitable for laser powder bed fusion

Study on the Selective Laser Sintering of A Low-Isotacticity Polypropylene Powder

Low Temperature Powder Bed Fusion of Polymers by Means of Fractal Quasi-Simultaneous Exposure Strategies

Effect of thermal treatment on crystallization and mechanical properties of PP/PET blend

Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties

Morphology and Crystallization Behavior of Compatibilized Isotactic Polypropylene/Poly(butylene Terephthalate) Blends under Shear Flow

Toward High-performance Polypropylene via Controlling Crystalline Morphology

Novel dynamic elongational flow procedure for reinforcing strong, tough, thermally stable polypropylene/thermoplastic polyurethane blends.

Accelerated Crystallization and Crystal-Crystal Transition of PB Induced by PP with Optimized Content

Recent Progress on Sintering Molding of Polymers

Rapid spheronization of irregular polymeric particles via microwave heating without stirring

The Effect of Tunable Modification Parameters on the Structure and Properties of Polypropylene with Cyclotrimerization Surface of Isocyanates

Investigation on the Crystallization Behavior and Morphology of Β-Nucleated Isotactic Polypropylene/glass Fiber Composites

Structure and Improved Properties of PPC/PBAT Blends Via Controlling Phase Morphology Based on Melt Viscosity

The Formation of a Highly Oriented Structure and Improvement of Properties in PP/PA6 Polymer Blends during Extrusion-Stretching

Glass Fiber Reinforced and Β‐nucleating Agents Regulated Polypropylene: A Complementary Approach and a Case Study

Development of High Thermal Insulation and Compressive Strength BPP Foams Using Mold-Opening Foam Injection Molding with In-Situ Fibrillated PTFE Fibers