Abstract:The phosphoric acid (PA) leakage problem has been a major constraint in the practical utilization of PA-doped polybenzimidazole for high-temperature proton exchange membranes (HT-PEMs). Increasing the retaining ability of the proton exchange membranes for free PA while decreasing the amount of PA doping seems to be a viable approach to reduce the possibility of PA leakage. In this work, the mild ester exchange reaction was introduced for the first time to prepare phosphonic acid grafted polybenzimidazoles containing pyridine (g-p-X). The phosphonic acid groups act as transport sites for proton conduction, effectively reducing the need for free PA in g-p-X membranes. Meanwhile, the pyridine immobilizes a portion of the PA through strong ionic interactions, and the membranes exhibit a high PA retention capacity. Among them, the g-p-20 membrane reaches 84.6% PA retention after the 120 h test. Thanks to the dual effects of the phosphonic acid groups and pyridine, the g-p-20 membrane shows a proton conductivity of 42 mS cm-1 at 180 degrees C without humidification. Moreover, with only 175.3 wt% PA doping, its highest single cell power density achieves 951 mW cm-2 (180 degrees C). Notably, after 120 h of steady operation at 140 degrees C, the voltage decay rate of the g-p-20 is only 10 mu V h-1. This work presents a viable concept for addressing the problem of PA leakage from HT-PEMs in long-term operation. Phosphonic acid grafted polybenzimidazole containing pyridine for high temperature proton exchange membranes exhibit excellent stability under low phosphoric acid doping conditions.

Alkaline Polymers of Intrinsic Microporosity: High-Conduction and Low-Loss Anhydrous Proton Exchange Membranes for Energy Conversion

HT-PEMs Based on Nitrogen-Heterocycle Decorated Poly (arylene Ether Ketone) with Enhanced Proton Conductivity and Excellent Stability

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Porous polymer electrolytes with high ionic conductivity and good mechanical property for rechargeable batteries

High Conductive Anion Exchange Membranes from All-Carbon Twisted Intrinsic Microporous Polymers

Polyoxometalate-Cross-Linked Proton Exchange Membranes with Post-Assembled Nanostructures for High-Temperature Proton Conduction

Imidazole and triazine framed porous aromatic framework with rich proton transport sites for high performance high-temperature proton exchange membranes

Phosphonic Acid Grafted Polybenzimidazoles Containing Pyridine for Stable High-Temperature Proton Exchange Membrane Fuel Cells

Quaternary ammonium-biphosphate ion-pair based copolymers with continuous H+ transport channels for high-temperature proton exchange membrane

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

Hydrophilic Microporous Polymer Membranes: Synthesis And Applications

Spacer-engineering construction of continuous proton transport networks for cardo poly(biphenyl indole) high-temperature proton exchange membranes

Sulfonated Microporous Polymer Membranes with Fast and Selective Ion Transport for Electrochemical Energy Conversion and Storage

Proton exchange membranes for high temperature proton exchange membrane fuel cells: Challenges and perspectives

High free volume crosslinked membranes constructed by stereocrosslinker for high-temperature proton-exchange membrane fuel cells

A New Class of Highly-Conducting Polymer Electrolyte Membranes: Aromatic ABA Triblock Copolymers

Inhibition of purine metabolism in Ehrlich ascites carcinoma cells by phenanthridinium compounds related to ethidium bromide.

Improved proton conductivity and mechanical performance of phosphoric acid doped aminated PAF-1 reinforced OPBI for high temperature proton exchange membranes

Molecular Complexation of Polymers and Metal Oxide Clusters for Semicrystalline, Thermoplastic Anhydrous Proton Exchange Membranes in Fuel Cells

Phosphoric Acid Based Proton Exchange Membranes for High Temperature Proton Exchange Membrane Fuel Cells