Abstract:The dynamic performance of a nozzle-flapper servo valve can be affected by several factors such as the disturbance of the input signal, the motion of the armature assembly and the oscillation of the jet force. As the part of vibrating at high frequency, the armature assembly plays a vital role during the operation of the servo valve. In order to accurately predict the transient response of the armature assembly during the vibration, a mathematical model of armature assembly is established based on the distributed parameters method (DPM) and Hamilton principle. The new mathematical model is composed of three main parts, the modal eigenfunction, modal mechanical response expressions of the spring tube and the motion equation of the other armature assembly. After programing, the purpose of using the DPM to predict the dynamic response of different positions located on the armature assembly is achieved. For verifying the validity of the mathematical model, the finite element method (FEM) and classic model (CM) of armature assembly are applicated by commercial software under the same condition. The comparison results prove that the DPM can effectively predict the axial and tangential deflection of the armature assembly different positions which the CM can't duing to its over-simplification. A certain error is generated when predicting the axial deformation at different heights by DPM, which is caused by an approximate method to simulate the torsion of the spring tube. The comparison results of the spring tube deflection at different vibration frequencies shows that the adaptability of DPM is significantly higher than the classic model, which verify the model is more adaptable for predicting the dynamic response of the armature assembly.

A Mathematical Model Including Mechanical Structure, Hydraulic and Control of LHDS

Modeling and simulation of humanoid lower limb based on Pneumatic Artificial Muscle

Modeling and Model Identification of Micro-position-control Hydraulic System

Co-Simulation Adams-Simulink for Analysis of Passive Four-Point Leveling System of the Hydraulic Press

Modeling of AMESim Based Hydraulic Parallel Mechanism and Simulation of Its Coupling Characteristics

Modeling and simulation of hydraulic system for the multi-DOF hydraulic arm

Kinematics Modeling and Simulation on Tilting and Lifting Mechanism

High Dynamic Position Control for a Typical Hydraulic Quadruped Robot Leg Based on Virtual Decomposition Control

MODELING AND SIMULATION OF MARINE CURRENT TURBINE WITH HYDRAULIC TRANSMISSION SYSTEM BASED ON AMESim

One Novel Hydraulic Actuating System for the Lower-Body Exoskeleton

Research on co-modeling virtual prototype of motion system of flight simulator

Design, Mathematical Modeling and Force Control for Electro-Hydraulic Servo System with Pump-Valve Compound Drive.

Research on Dynamic Modeling and Simulation of Complex Mechanical-Electrical-Hydraulic Coupling System

Analysis and Structure Design of the Underwater Hexapod Robot Leg

Modeling, simulation, and experimental validation of electro-hydraulic power steering system in multi-axle vehicles

Co-simulation of a quadruped robot's mechanical and hydraulic systems based on ADAMS and AMESim

A novel kinematics and statics correction algorithm of semi-cylindrical foot end structure for 3-DOF LHDS of legged robots

A coupled hydraulic and mechanical system simulation for hydraulic excavators

Dynamic simulation of a hydraulic exoskeleton robot based on virtual prototyping

Modeling and Simulation in Hydraulic Mount of Automotive Powertrain

Mathematical modeling of an armature assembly in pilot stage of a hydraulic servo valve based on distributed parameters