Abstract:Using stereo synthetic aperture radar (SAR) to extract 3-D information has become an important means of continuously improving the spatial resolution and geometric positioning accuracy of spaceborne SAR. However, owing to the large differences in a stereo configuration, such as intersection angle (ITA), it is difficult to guarantee localisation accuracy. This study proposed a method for analysing the stereoscopic intersection capability and verifying the accuracy of spaceborne SAR images. The method is improved from three aspects. First, it considers the complexity of the OPSS and SASS modes and discusses the two cases separately in the theoretical modeling and experimental analysis. Secondly, in the theoretical modeling stage, the error is no longer simplified as originating from only one image, but all images have errors. Finally, the validity of the modeling conclusions is verified using multiple sets of simulated experiments and real SAR experiments. Experiments show that stereo SAR has more potential than single SAR. In the opposite-side stereo (OPSS) mode, the planimetric positioning accuracy of 35.028 m (single SAR) can be improved to 3.132 m (stereo SAR, optimal 1.641 m). By designing a reasonable stereo configuration, the geometric positioning accuracy of the original data can be significantly reduced by 31.896 m. In addition, the results show that, (1) for the symmetric OPSS mode, the planimetric accuracy can be improved, and an increase in the ITA will decrease the vertical accuracy. (2) For the same-side stereo (SASS) mode, the smaller the ITA, the higher the planimetric accuracy (except for a weak ITA). In addition, if the incidence angle (ICA) is fixed, an increase in the ITA increases the vertical accuracy. (3) The base-to-height ratio is not the only prerequisite for the stereo configuration. The recommended ITA value for symmetric OPSS mode is 52–80°, and the suggested ITA threshold for SASS mode is 10–21°. The theoretical results are generally compatible with the previous achievements, which can guide applications such as ground control point production, DSM generation, and 3-D information extraction.

An Innovative Superpolyhedron (SP) Formation for Multistatic SAR (M-SAR) Interferometry

A New SAR Imaging Method for Sparse Field Traget

Conceptual Study and Performance Analysis of Tandem Multi-Antenna Spaceborne SAR Interferometry

Three-Dimensional High-Resolution Space-Borne ISAR Imaging With Compact Antenna Configuration for Large Rotational Angle

Spaceborne SAR stereoscopic intersection capability analysis and accuracy verification

A New Conception of Multi-Stage DBF Based Spaceborne High-Resolution Wide-Swath SAR System

Conceptual Study and Performance Analysis of Tandem Dual-Antenna Spaceborne SAR Interferometry

Imaging and Interferometric Mapping Exploration for PIESAT-01: the World’s First Four-Satellite “cartwheel” Formation Constellation

Imaging and Interferometric Mapping Exploration for PIESAT-01: The World's First Four-Satellite "Cartwheel" Formation Constellation

Laboratory multistatic 3D SAR with polarimetry and sparse aperture sampling

System Concepts and Potential Applications of a Tri-Beam Spaceborne SAR Mission

A Review Of Ten-Year Advances Of Multi-Baseline Sar Interferometry Using Terrasar-X Data

Mission Design and Orbit-Attitude Control Algorithms Development of Multistatic SAR Satellites for Very-High-Resolution Stripmap Imaging

Simultaneous Scene Imaging and GMTI Scheme With Multiple Beamforming for Hypersonic Vehicle-Borne Dive-Trajectory MC-SAR

A Phase Optimization Method for DS-InSAR Based on SKP Decomposition From Quad-Polarized Data

FDM MIMO Spaceborne SAR Tomography by Minimum Redundancy Wavenumber Illumination

Multi-mode SAR Interferometry Processing Research and Implementation

A Novel 2-D Geometry Reconstruction Approach for Space Debris via Interpolation-Free Operation under Low SNR Conditions

Conceptual Study of Tri-beam Spacebrone SAR

Spaceborne HRWS-SAR-GMTI System Design Method with Optimal Configuration

Radio Frequency Interference Mitigation in SAR Systems via Multi-Polarization Framework