Abstract:International Journal of Aeroacoustics, Ahead of Print. In order to obtain the influence mechanism of the rotor noise and the local aerodynamic variation under different operating conditions, a novel discrete noise analysis strategy for the acoustic source localization is established. The analysis strategy has two aspects including the blade division method and the noise contribution calculation method. Firstly, the body-fitted rotor blade grids are preprocessed and refined at the division position before the flowfield simulation. Then, based on the flowfield result, the blade grids are divided into several blocks in the chordwise and spanwise directions, and the acoustic pressure of each block is predicted. Finally, a discriminant function for the contribution of the block to the rotor noise is proposed, and the acoustic source localization is carried out. The URANS equations and FW-H equations are used to capture high-fidelity flowfield and rotor acoustic pressure. Parameters such as the block position in different direction on the rotor blade and the collective pitches are quantified, and the relationship between air flow and aeroacoustics is discussed in detail. Some conclusions are obtained by analyzing the BO105 model rotor in hover. The acoustic pressure produced by the leading edge of the upper surface could cancel about 50% acoustic pressure of the remainder of these blocks. Increasing the force at this position will be benefit to the noise reduction. Acoustic source distribution is closely linked to the flow separation near the blade tip: the main acoustic source moves toward around 0.9 R section of the blade in the spanwise direction, and it moves from the leading edge towards the trailing edge in the chordwise direction.

Rotating Acoustic Source Localization: A Power Propagation Forward Model and Its High-Resolution Inverse Methods

High-Resolution Fast-Rotating Sound Localization Based on Modal Composition Beamforming and Bayesian Inversion

High-resolution localization of rotating acoustic sources: An experimental investigation and axial fan application

A New Seperation Method for Rotationg and Static Sound Source Localization

Variational Bayesian Modal Composition Beamforming for Fast-Rotating Axial-Fan Blade-Noise Localization and Its Application Condition

Robust Bayesian Super-Resolution Approach Via Sparsity Enforcing a Priori for Near-Field Aeroacoustic Source Imaging

A Bayesian Framework of Non-Synchronous Measurements at Coprime Positions for Sound Source Localization with High Resolution

A Robust Super-Resolution Approach with Sparsity Constraint in Acoustic Imaging

Efficient Localization of Low-Frequency Sound Source with Non-Synchronous Measurement at Coprime Positions by Alternating Direction Method of Multipliers.

A robust super-resolution approach with sparsity constraint for near-field wideband acoustic imaging

A Fast Bayesian High-Resolution Localization Method for Rotating Blade Noise

A Robust Detection Method For Micro-Doppler Feature Of Rotating Blades Under Low Snr

A time-domain inverse method for the localization and quantification of unsteady rotating loading sources

Fast Bayesian hierarchical inference via sparsity enforcing a priori for aeroacoustic source imaging

A High Resolution Bearing Estimation Method Based on Sparse Reconstruction

A Separation-Based Localization Method Between Rotating and Static Sources

A Fast and Robust Localization Method for Low-Frequency Acoustic Source: Variational Bayesian Inference Based on Nonsynchronous Array Measurements.

The Methodological and Experimental Research on the Identification and Localization of Turbomachinery Rotating Sound Source

Spatial and temporal reconstruction of unsteady rotating forces through an inverse acoustic method

Acoustic Source Localization in a Reverberant Environment Based on Sound Field Morphological Component Analysis and Alternating Direction Method of Multipliers

Numerical study of acoustic source localization of rotor using a novel discrete noise analysis strategy