Abstract:Concrete structures that experience internal swelling reactions are often affected by other deleterious mechanisms, such as creep and shrinkage. In Brazil and many other countries around the world, numerous cases of building foundations and concrete dams were investigated due to the damage associated with internal expansions. Macroscopic models for the numerical representation of these expansions must take into account the influence of key environmental parameters such as temperature, degree of saturation, and the rate of development of the chemical reaction. To be relevant in structural applications, concrete creep models must consider several important phenomena, such as non-linearity, multi-axiality, and thermal and drying effects. In order to prevent these pathologies, to plan rehabilitation work, and to develop new design procedures, numerical simulation using the finite element method (FEM) is a very useful tool. This work aimed to implement a chemical model to simulate the advancement of the internal expansion reactions and a mechanical model to simulate creep and shrinkage phenomena in COMSOL Multiphysics® to reassess concrete structures suffering from these mechanisms. Both models were implemented separately to evaluate their responses and compare them with the theoretical results and experimental benchmarks proposed by the developers of these models. The numerical results obtained presented an excellent agreement with the experimental results, with a deviation of less than 10%, which showed that the implementation of the developed numerical models was very efficient. Moreover, this research holds significant importance as the mathematical models used to simulate internal expansions in concrete are currently only available in limited-use FEM software's. Therefore, demonstrating the successful implementation of these models in widely used finite element programs and their ability to produce reliable results would be a valuable contribution.

Numerical Simulation of Concrete Creep Behaviour Using Integral Creep Algorithm with Alternating Stresses

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Calculation of Short-Term Creep of Concrete Using Fractional Viscoelastic Model

Numerical Simulation of High-Strength Concrete Creep under Cyclic Load

Numerical Method for Creep Analysis of Strengthened Fatigue-Damaged Concrete Beams

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

A Modified Creep Index and Its Application to Viscoplastic Modelling of Soft Clays

Creep Model of High-Performance Concrete at Different Loading Ages

Measurement and Modeling of Creep Property of High-Strength Concrete Considering Stress Relaxation Effect

Nonlinear Creep Damage Constitutive Model of Concrete Based on Fractional Calculus Theory

Experimentally informed modeling of the early‐age stress evolution in cementitious materials using exponential conversion from creep to relaxation

An improved approach for the continuous retardation spectra of concrete creep and applications

Chemical and Creep Models Applied to Concrete Damaged by Alkali–Silica Reactions

Numerical model for time-dependent cracking and deflection of large-span concrete bridge structures

Measurement and Modeling Concrete Creep Considering Relative Humidity Effect

Proposal of a Creep-Experiment Method and Superficial Creep Coefficient Model of CFT Considering a Stress-Redistribution Effect

Viscoelastic–Plastic Constitutive Model Considering the Damage Characteristics of Concrete in the Process of Nonlinear Creep

Long Term Deformation Analysis of Shrinkage and Creep of Steel-Concrete Composite beams

Numerical Simulation of Dynamic Mechanical Properties of Concrete under Uniaxial Compression

Application of Fractional Calculus in Predicting the Temperature-Dependent Creep Behavior of Concrete

Numerical modeling of delayed damage and failure of concrete structures under sustained loading