Abstract:Although many different railroad grade crossing control products are available, the most challenging limitation to traditional grade crossing systems is their inability to deliver consistent warning times in response to varying train speeds and station stops (particularly nearside stops). As a result, rail-roadway crossings often generate conflicts and congestion for motorist traffic and sometimes delay trains. By conducting system level analysis, this project will investigate the interactions and conflicts between urban/suburban rail and cross traffic. The information that is obtained will then be applied to develop practical solutions to minimize impacts on motor vehicle traffic and improve or maintain schedule adherence for rail operations. In the end, this project plans to conduct field testing of the developed solutions and algorithms on the San Diego trolley system. The proposed active LRT priority system consists of four major components: train detector, train travel and dwelling time predictor, priority request generator, and traffic signal controllers. The train detection means can be either traditional point detection, such as the loop system, or continuous detection, such as the GPS based AVL system. Based on the collected field data, a travel time predictor and the dwelling time predictor were developed. Based on the predicted arrival, a Mixed-Integer Quadratic Programming (MIQP) model was developed. The objectives of this optimization model are two-fold: 1) to minimize intersection delays for trolleys by providing signal priority; and 2) to minimize impacts on other traffic incurred by the priority. By applying the proposed optimization model, the average trolley performance index (PI), which is the expected trolley passenger delay, is reduced enormously by 89.5%. Moreover, the standard deviation of trolley PI is reduced significantly by 68.6%, which means trolleys’ travel time is more stable with signal priority. Within the priority impacted cycles, the traffic delay is increased by 30.4%. The total intersection passenger delay is reduced by 66.8%. We also conducted the simulation testing by implementing our signal control algorithm in Paramics. The PI for trolleys decreases by as much as 77% if we use the proposed signal control algorithm, although the PI of the cross street traffic increases by 27%. By adjusting the weighting factor in our MIQP model, we can reduce the delay for the cross street traffic, however, the time saved for trolley will not be so noticeable.

Optimization of grade-separated road and railway crossings based on a distance transform algorithm

Development of Algorithms for Effective Resource Allocation among Highway–Rail Grade Crossings: A Case Study for the State of Florida

A Combined Algorithm Research And Application In Road Intersection Design

Mountain railway alignment optimization integrating layouts of large‐scale auxiliary construction projects

Offset Optimization Based on Queue Length Constraint for Saturated Arterial Intersections

Railway alignment optimization in regions with densely-distributed obstacles based on semantic topological maps

Research on offset optimization of signalized arterials

Study on the optimization of high-speed turnout crossing structures based on actual elastic deformation of point and splice rails

Isolated intersection control based on hybrid optimization model

Mountain railway alignment optimization based on landform recognition and presetting of dominating structures

Analysis Toward Mitigation of Congestion and Conflicts at Light Rail Grade Crossings and Intersections

3D constrained Hybrid A*: Improved vehicle path planning algorithm for cost-effective road alignment design

Simultaneous optimization of 3D alignments and station locations for dedicated high‐speed railways

Safety-Based Optimization Model for Highway Horizontal Alignment Design

Intelligent optimization of highway alignments: A novel approach integrating geographic information system and genetic algorithms

Analysis of Traffic Characteristics and Distance Optimization Design between Entrances and Exits of Urban Construction Projects and Adjacent Planar Intersections

An evolutionary model for simultaneously optimizing three-dimensional highway alignments

Railway Alignment Optimization Considering Lifecycle Costs

Traffic optimization design of The Intersection of Zhan Qian Road and Min Zhu Zhong Road in Jiaozuo City

Optimizing horizontal alignment of roads in a specified corridor

Design And Implementation Of A New Algorithm For Optimal Route Traversal Searching In Interlocking Stations