Abstract:Although polyethersulfone (PES) membranes are extensively utilized in water and wastewater treatment, they typically encounter serious bio/organic fouling problems. In this work, an antimicrobial and antifouling PES membrane was developed through incorporating novel ZnO/PHMB (zinc oxide/ polyhexamethylene biguanide hydrochloride) nanocomposites on the surface of a commercial PES membrane, with PDA (polydopamine) serving as an intermediate connection layer. XPS, along with synchrotron-based XRF and ATR-FTIR results confirmed the successful synthesis of the ZnO/PHMB nanocomposites and ZnO/PHMB membranes. The ZnO/PHMB nanocomposites exhibited an impressive antimicrobial rate of 99.99 % with a minimal amount of PHMB addition (wt ZnO :wt PHMB = 1:0.01). The concentration of the ZnO/PHMB nanocomposites had the most significant impact on the antimicrobial performance of the ZnO/PHMB membrane. The 600ZP membrane (i.e., the PES membrane modified with 600 mg/L ZnO/PHMB nanocomposites) emerged as the optimal choice, as evidenced by its commendable antimicrobial performance (92.80 %), water flux (249.02 LMH), RB (Rose Bengal sodium salt) rejection (93.96 %), and cost-benefit considerations. Compared to the pristine PES membrane, the 600ZP membrane showed 5.32 %, 15.76 %, and 7.62 % increased hydrophilicity, water flux, and RB rejection rate, respectively. Additionally, the 600ZP membrane possessed a bactericidal rate of 92.80 % and a flux recovery rate of 89.24 % after three cycles of SA (sodium alginate) filtration, indicating enhanced antimicrobial and antifouling capacities. The 600ZP membrane exhibited a remarkable 91.05 % higher water flux following prolonged (72 h) treatment of secondary effluent, compared to the PES membrane. Attribute to the increased hydrophilicity, outstanding antimicrobial activity, as well as excellent stability and durability, the as-prepared ZnO/PHMB membrane shows great potential for wastewater treatment.

Enhanced Permeability and Antifouling Performance of Polyether Sulfone (PES) Membrane Via Elevating Magnetic Ni@MXene Nanoparticles to Upper Layer in Phase Inversion Process

One-step Electrospinning of Negatively-Charged Polyethersulfone Nanofibrous Membranes for Selective Removal of Cationic Dyes

Fabrication of high permeability and antifouling composite membrane loaded with Fe 3 O 4 nanoparticles via a magnetic field induced phase separation

Development of an antimicrobial and antifouling PES membrane with ZnO/poly(hexamethylene biguanide) nanocomposites incorporation

Bimetallic polyphenol networks structure modified polyethersulfone membrane with hydrophilic and anti-fouling properties based on reverse thermally induced phase separation method

Enhancing the Antifouling and Antimicrobial Properties of Poly(ether sulfone) Membranes by Surface Quaternization from a Reactive Poly(ether sulfone) Based Copolymer Additive

Engineering High-Effective Antifouling Polyether Sulfone Membrane with P(Peg-Pdms-Kh570)@Sio2 Nanocomposite Via In-Situ Sol-Gel Process

Fabrication of a Novel Antifouling Polysulfone Membrane with in Situ Embedment of Mxene Nanosheets

Modified Polyethersulfone Ultrafiltration Membrane for Enhanced Antifouling Capacity and Dye Catalytic Degradation Efficiency

MOF@MXene nanocomposite as a novel modifier to extend the application of PES mixed-matrix nanofiltration membranes for water treatment

Flux, antifouling and separation characteristics enhancement of nanocomposite polyethersulfone mixed-matrix membrane by embedding synthesized hydrophilic adipate ferroxane nanoparticles

Pioneering Biofouling Resistant PES UF Membrane with MnFe2O4/g-C3N4 Nanocomposite: Insight into Mechanisms and Fouling Dynamics

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

Antifouling performance enhancement of PES membranes using hydrophilic nanoparticles of poly(dopamine-acrylate) for oil/water separation

Synthesis of novel magneto-hybrid polyoxometalate composite membrane with simultaneous photocatalytic self-cleaning and antifouling functionalities

Effects of a dual functional filler, polyethersulfone-g-carboxymethyl chitosan@MWCNT, for enhanced antifouling and penetration performance of PES composite membranes

Hydrophilic and Anti-Fouling Polyethersulfone Ultrafiltration Membranes with Poly(2-Hydroxyethyl Methacrylate) Grafted Silica Nanoparticles As Additive

PES mixed-matrix ultrafiltration membranes incorporating ZIF-8 and poly(ionic liquid) by microemulsion synthetic with flux and antifouling properties

Conductive Polyethersulfone Membrane Facilely Prepared by Simultaneous Phase Inversion Method for Enhanced Anti-Fouling and Separation under Low Driven-Pressure.

Anti-Fouling and Anti-Bacterial Polyethersulfone Membranes Quaternized from the Additive of Poly(2-Dimethylamino Ethyl Methacrylate) Grafted Sio2 Nanoparticles

MOF@Polydopamine-incorporated membrane with high permeability and mechanical property for efficient fouling-resistant and oil/water separation