Abstract:Boron, as both a lithophilic and biophilic element with high solubility, provides profound insights into the history of the Earth and environmental changes through its isotopes present in sediments. However, there are still some challenges in the accurate and precise determination of boron isotopes in sediments, particularly in pre-processing. When using boron-specific resins for the purification and enrichment of boron, it is in an alkaline environment. During the pre-treatment process, insoluble hydroxides of Al, Fe, and rare earth elements precipitate, exhibiting strong boron adsorption in high-pH solutions. This has potential impacts on the accuracy of boron isotope measurements. This study assesses a method that uses Na 2 CO 3 and K 2 CO 3 for dissolution at reduced temperatures and a cationic resin combined with a boron-specific resin for the enrichment and purification of boron in sediments. All the Al, Fe, and rare earth elements, which can generate water-insoluble hydroxides, were mainly removed by the cationic resin column, and boron in the sample solutions without Al, Fe, and rare earth elements was extracted by the boron-specific resin. The boron isotope composition ( δ 11 B) was determined using MC-ICP-MS. The results indicate that this method fully decomposes and efficiently purifies the sediments. The long-term instrumental external reproducibility of δ 11 B values for NIST SRM 951a, ERM-AE120, and ERM-AE121 were 0.01 ± 0.09‰ ( n = 13), −20.28 ± 0.16‰ and 19.98 ± 0.14‰, based on the measurements using a series of international reference materials over the last three years. The measured δ 11 B values for the standards have various matrices. The δ 11 B values of GSR-1 (−13.14‰ ± 0.27‰), BHVO-2 (−0.66 ± 0.06‰), AGV-2 (−3.22 ± 0.14‰) and Nass-6 (39.83 ± 0.07‰) are in agreement with the published data within uncertainty. The samples from Sihailongwan Maar Lake (SMK), the Loess Plateau (Loess-1 and Loess-2), shale (SH-1 and SH-2), and basalt (BL-1 and BL-2) were treated. The δ 11 B values for SMK, Loess-1, and Loess-2 are −10.20 ± 0.29‰, −11.06 ± 0.16‰, and −10.79 ± 0.10‰, showing a close relationship with δ 11 B of the continental crust. The δ 11 B values for shale (SH-1 and SH-2) are −7.06‰ ± 0.32‰ and +2.28‰ ± 0.05‰, while those for basalt (BL-1 and BL-2) are −8.78‰ ± 0.09‰ and +2.50‰ ± 0.19‰. These results indicate a significant variation in the δ 11 B values across these samples. These findings imply that this approach is capable of efficiently enriching and purifying boron in sediments. It enables accurate and precise determination of δ 11 B in sediments, thus offering a reliable tool for conducting boron isotope studies in sedimentary earth science.

Determination Of Boron In Aqueous Solution Using A Method Combining Laser Ablation Molecular Isotopic Spectrometry With Molecular Laser-Induced Fluorescence And Isotopic Dilution

Determination of Boron with Molecular Emission Using Laser-Induced Breakdown Spectroscopy Combined with Laser-Induced Radical Fluorescence

Determinations of Trace Boron in Superalloys and Steels Using Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence

Boron elemental and isotopic determination via the BF diatomic molecule using high-resolution continuum source graphite furnace molecular absorption spectrometry

Accurate and Precise Determination of Boron Isotopic Ratios at Low Concentration by Positive Thermal Ionization Mass Spectrometry Using Static Multicollection of Cs2BO2+ Ions.

Determination of Boron in Water Samples by Dispersive Liquid-Liquid Microextraction Based on the Solidification of A Floating Organic Drop Coupled with A Fluorimetric Method

Boron quantification using ion chromatography tandem triple quadrupole mass spectrometry. Application to retention analysis in boron-treated wood

Improved Alkaline Fusion Method for B Isotope and Concentration Measurements of Silicate Materials

Purification of boron using a combination of cationic and boron-specific resins and determination of boron isotopic composition in sediments by MC-ICP-MS

Application of Ethylenediaminetetraacetic Acid Disodium Salt to High Precision Measurement of Isotope of Boron in Acid. soluble Fraction of Sediments

An Improved Procedure for Separation/purification of Boron from Complex Matrices and High-Precision Measurement of Boron Isotopes by Positive Thermal Ionization and Multicollector Inductively Coupled Plasma Mass Spectrometry.

Determination of 10 B/ 11 B in boric acid and B 4 C using LA-ICPMS

Boron isotopic analysis using molecular emission from double-pulse laser-induced plasma in aqueous boric acid solution

Automatic and High-Precision Determination of Boron Isotopic Ratios Using Thermal Ionization Mass Spectrometry with Static Multi-Collection

Effective Elimination of Isobaric Ions Interference and Precise Thermal Ionization Mass Spectrometer Analysis for Boron Isotope

A Simple, Low‐Blank Batch Purification Method for High‐Precision Boron Isotope Analysis

Evaluation of analytical uncertainty in quantitative determination of elements - The case of boron

Elimination of the Boron Memory Effect for Rapid and Accurate Boron Isotope Analysis by MC-ICP-MS Using NaF

An experimental study of organic matters that cause isobaric ions interference for boron isotopic measurement by thermal ionization mass spectrometry

Boron Separation by the Two-Step Ion-Exchange for the Isotopic Measurement of Boron

Trace Element Analysis of Aqueous Samples by Laser-Induced Breakdown Spectroscopy Based on Pre-Concentration of Electrospray