Abstract:In this work, a novel dendritic copolymer PNSi-co-MP as an intumescent flame retardant was fabricated using a silicon-, phosphorus- and nitrogen-containing monomer (PNSi) and melamine phosphate (MP). Random copolymerization way disrupted the regularity of monomer arrangement, resulting in the thermal deformation behavior of PNSi-co-MP being different from the self-polymerized macromolecule (MPNSi) / melamine polyphosphate (MPP) system. Consequently, PNSi-co-MP was distributed reasonably evenly in the polypropylene (PP) matrix, and some of the PNSi-co-MP particles deformed to 200–300 nm from 5 to 10 μm. More importantly, the toughness of PNSi-co-MP/PP was dramatically increased compared with MPNSi/MPP/PP. Specifically, 16PNSi-co-4MP/PP exhibited a 278% higher elongation at break and a 33.3% higher unnotched impact strength compared to 16MPNSi/4MPP/PP. Furthermore, PNSi-co-MP exhibited a rapid charring effect in PP. In a cone calorimeter test, the maximum combustion intensity of the composite was inhibited in only 17 s by the PNSi-co-MP molecule. Compared with the pure PP, the composite with 20 wt% 12PNSi-co-8MP showed a 93.6% lower peak heat release rate and an 87.2% lower smoke production rate, indicating its excellent flame retardancy. The composites containing copolymer molecules also performed much higher flame retardancy than MPNSi/MPP/PP sample, although their chemical composition was almost the same except for the linking form of flame-retardant monomers. PNSi-co-MP simultaneously endowed PP with a higher limited oxygen index, glow wire flammability index, glow wire ignition temperature, residue yield, and fire safety performance than MPNSi/MPP. The reason for this was that the copolymerization strategy aggregated the flame-retardant monomers into one molecule, thus effectively promoting the charring reaction. Accordingly, this work provided a new method for preparing flame-retardant molecules with comprehensive performance through molecular composition and structural design.

Interpenetrating Polymer Network-Based Composites Reinforced by Polysilsesquioxanes: Molecular Dynamic Simulations and Experimental Analysis

Molecular-level Dispersion of Rigid-Rod Sulfonated Aromatic Polyamides in Epoxy Resin for Extraordinary Improvement in Both Strength and Toughness

Preparation and properties of an interpenetrating network polymer based on polydicyclopentadiene and phenolic resin

Designing Polymer Nanocomposites with A Semi-Interpenetrating or Interpenetrating Network Structure: Toward Enhanced Mechanical Properties

Molecular Dynamic Simulations and Experiments Study on the Mechanical Properties of HTPE/PEG Interpenetrating Polymer Network (IPN) Binders

Interpenetrating Polymer Networks of Porous Organic Polymers and Polyurethanes for Flame Resistance and High Mechanical Properties

Dendritic copolymers from P-, N- and Si-based monomer and melamine phosphate generate thermal deformation toughening and a rapid charring flame retardant effect in polypropylene

Enhanced mechanical and adhesive properties of PDMS based on novel PDMS-epoxy IPN structure

Micro-crosslinking of phosphaphenanthrene/siloxane molecule initiate aggregation flame retardant and toughening enhancement effects on its polycarbonate composite

Study on Effect of Polydimethylsiloxane in Intumescent Flame Retardant Polypropylene

The Properties and Morphologies of Composites Based on Sulfated EPDM Ionomer Toughed Polypropylene Highly Filled with Mg(OH)2

Properties and Morphology of Interpenetrating Polymer Networks Based on Poly(urethane-Imide) and Epoxy Resin

Rheological, flame retardancy, and thermomechanical properties of polymethyl methacrylate composites: Effects of flame retardant and toughener

Enhanced mechanical properties, thermal stability of phenolic‐formaldehyde foam/silica nanocomposites via in situ polymerization

Preparation of hybrid phosphamide containing polysilsesquioxane and its effect on flame retardancy and mechanical properties of polypropylene composites

Novel functionalized isocyanate groups polyhedral oligomeric silsesquioxanes/epoxy composites with advanced thermal and moisture resistance properties

Synthesis and thermal curing of liquid unsaturated polysilsesquioxane and its mechanical and thermal properties

Facile fabrication of polyurethane/poly(methyl methacrylate) semi‐interpenetrating polymer networks for enhanced mechanical and thermal properties

The Cellular Structure and Mechanical Properties of Polypropylene/Nano-CaCO3/Ethylene-propylene-diene-monomer Composites Prepared by an In-Mold-Decoration/Microcellular-Injection-Molding Process

Polymer Topology Reinforced Synergistic Interactions among Nanoscale Molecular Clusters for Impact Resistance with Facile Processability and Recoverability.

Morphological, thermal and solid-state NMR study on a novel PMMA/crosslinked silicone semi-IPN