Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Products Distribution and Contribution of (de)chlorination, Hydroxylation and Coupling Reactions to 2,4-Dichlorophenol Removal in Seven Oxidation Systems.

The Co-Activation of Persulfate with Tannic Acid and Sodium Hydroxide for the Degradation of p-Chlorophenol

Complete Degradation of 2,4-Dichlorophenol in Sequential Sulfidated Nanoscale Zero-Valent Iron/peroxydisulfate System: Dechlorination, Mineralization and Mechanism

Experimental and theoretical study on Fe(VI) oxidative degradation of dichlorophen in water: Kinetics and reaction mechanisms.

Effieiency and Mechanism of Dichlorvos Removal by Ozonation

Removal of 3,4-dichlorophenol from water utilizing ferrate(VI): Kinetic and mechanistic investigations, and effect of coexisting anions

Effect of Different Water Quality on Ozonation of 2, 4-D

Mechanism and Influence Factors of 2,4‐D Dechlorination by Sodium Citrate‐activated Bimetallic Palladium‐zero Valent Iron Nanoparticles

Removal of 4-Chlorophenol from Polluted Water by Aluminum-Iron Alloys.

Efficiently Complete Degradation of 2,4-DCP Using Sustainable Photoelectrochemical Reduction and Sequential Oxidation Method

Laccase-catalyzed Removal of the Antimicrobials Chlorophene and Dichlorophen from Water: Reaction Kinetics, Pathway and Toxicity Evaluation

Fe(VI)-Mediated Single-Electron Coupling Processes for the Removal of Chlorophene: A Combined Experimental and Computational Study

Degradation of Pentachlorophenol in Peroxymonosulfate/heat System: Kinetics, Mechanism, and Theoretical Calculations

Efficient photodegradation of 2,4-dichlorophenol in aqueous solution catalyzed by polydivinylbenzene-supported zinc phthalocyanine

Zero-valent Iron-Peroxydisulfate As Synergistic Co-Milling Agents for Enhanced Mechanochemical Destruction of 2,4-Dichlorophenol: Coupling Reduction with Oxidation.

Surfactant-assisted removal of 2,4-dichlorophenol from soil by zero-valent Fe/Cu activated persulfate

Reductive Dechlorination of 2,4-Dichlorophenol by Pd/Fe Nanoparticles Prepared in the Presence of Ultrasonic Irradiation.

Distribution of chlorination products of phenols under various pHs in water disinfection

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

Interactions Between Chlorophenols and Peroxymonosulfate: Ph Dependency and Reaction Pathways.

Transformation of Bromophenols by Aqueous Chlorination and Exploration of Main Reaction Mechanisms.