Abstract:Calculating wind resistance is an important process in the design of highway bridges. The current codes of many countries include different rules and formulas regarding the calculation of wind resistance. In this paper, the transverse-direction wind loads on long-span girder bridges with tall piers were calculated using six codes from different countries under various terrain, pier height, and girder length conditions. The pier-bottom shear force and moment results of transverse wind loads calculated using these six codes were compared with those obtained using the buffeting frequency domain method. Results showed that, in Class B terrain, wind load results predicated on China's 2004 general codes for the design of highway bridges and culverts, China's 2004 wind-resistant design specifications for highway bridges, Japan's 2007 wind-resistant design manual for highway bridges, and Part 2 of Britain's 2006 steel, concrete, and composite bridge specifications for loads resembled each other closely. Some difference was found to exist among Classes A, C, and D terrain. The 2007 AASHTO LRFD bridge design specifications and China's 2001 load codes for the design of building structures showed significant differences from the other four codes on all kinds of terrain. The applicability of the wind load rules in the AASHTO LRFD bridge design specifications to long-span girder bridges with tall piers merits further discussion. China's wind load calculations of load code for the design of building structures mainly depended on the empirical parameters of architectural structures with large dimensions, and had limited applicability to bridge structures. For long-span girder bridges with tall piers, such as bridges with span length-to-width or -depth ratios exceeding 30, or pier height-to-transverse-width ratio exceeding 10.7, the wind load calculated using these codes was generally underestimated due to the neglect of the effects of aeroelastic forces, which must be taken into account in the design of these kinds of bridges. DOI: 10.1061/(ASCE)BE.1943-5592.0000316. (C) 2012 American Society of Civil Engineers.

Two-Dimensional Aerodynamic Admittance Of A Flat Closed-Box Bridge

Numerical Study on Static Aerodynamic Coefficients Aerodynamic Interference Effects of the Box girder Section of Continuous Rigid Frame Bridge with Close Twin Deck

CFD Numerical Simulation of Wind Field and Vehicle Aerodynamic Characteristics on Truss Bridge Deck under Crosswind

Buffeting analysis of long-span twin-box cable-stayed bridge during construction

Experimental and numerical study on buffeting force characteristics of the π -shaped bridge deck

Wind Tunnel Measurements for Flutter of a Long-Afterbody Bridge Deck

Identification of aerodynamic admittance functions in active grid generated turbulent flow

Numerical investigation on aerodynamic performance of a streamlined box deck accounting for Stokes wave boundary effects

Experiments of aerodynamic admittances for moving vehicles on bridges

Wind tunnel test on the aerodynamic admittance of a rail vehicle in crosswinds

Buffeting Response Prediction of Long-Span Bridges Based on Different Wind Tunnel Test Techniques

Aerodynamic stability of high-speed vehicle passing bridge tower in different lanes under crosswind conditions

Influence of turbulence integral length scale on aerostatic coefficients of bridge sections

Aerodynamics of a flat girder: Effects of its aspect ratio and angle of attack

Wind tunnel tests on the aerodynamic characteristics of vehicles on highway bridges

Aerodynamics and surrounding flow patterns of a long-span bridge girder model with triple-separated boxes

An experimental study to characterize unsteady vortex and flow structures around a twin-box-girder bridge deck model

Methods of calculating wind loads on long-span girder bridges with tall piers and comparison of values

Influence of wind directionality on the three-dimensional distortion of buffeting force on a streamlined bridge deck: Insight into the pylon interference effect

Numerical simulation and validation of local wind environment of twin-box girder with wind barriers

Wind Tunnel Test on Local Wind Field around the Bridge Tower of a Truss Girder