Abstract:The techniques for releasing thermal energy accumulated in periods of high availability to meet the demand in periods of low energy supply contribute to the continuity of the cycles involved in thermodynamic processes. In this context, phase change materials are capable of absorbing and releasing large amounts of energy in relatively short periods of time and under specific operating conditions. However, phase change materials have low thermal conductivity and need to be coupled with high-thermal-conductivity materials so that the heat flux can be intensified and the energy absorption and release times can be controlled. This work aims to numerically study the solidification process of a phase change material inserted into a triplex tube heat exchanger with finned copper walls to intensify the thermal exchange between the phase change material and the cooling heat transfer fluid, water, that will receive the energy accumulated in the material. This work proposes the 3D numerical modeling of the triplex tube heat exchanger with finned walls and meets the need for numerical models that allow for the analysis of the full geometry of the latent heat thermal energy storage system and the thermal and fluid dynamic phenomena that are influenced by this geometry. Results of the temperature, liquid fractions and velocity fields during phase transformations are presented, analyzed and validated with experimental data, presenting average errors of below 5%. The total material discharge time was approximately 168 min, necessary for the complete solidification of the phase change material, with water injected into the triplex tube heat exchanger at a flow rate of 8.3 L/min and a temperature of 68 °C. The solidification process occurred more slowly in the same direction as the length of the triplex tube heat exchanger, and from 80% of the material in the solid state, the difference between the solidification time for z = 0 and z = 480 mm was 30 min. The fluid dynamic conditions developed in the latent heat thermal energy storage system promoted a maximum negative heat flux of −6423 w/m2 to the annular internal surface and −742 w/m2 to the annular external surface, representing a heat removal process nine times less intense on the external surface. The total energy released to the cooling heat transfer fluid was 239.56 kJ/kg.

Experimental and numerical research on thermal performance of a novel thermal energy storage unit with phase change material

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Experimental study of the thermal performance of a novel plate type heat exchanger with phase change material

Research on the thermal behavior of medium-temperature phase change materials and factors influencing the thermal performance based on a vertical shell-and-tube latent heat storage system

Experimental investigation of thermal performance in a shell-and-tube phase change thermal energy storage unit with an inner square tube

Experimental research and numerical simulation of the thermal performance of a tube-fin cold energy storage unit using water/modified expanded graphite as the phase change material

Design and Experimental Investigation of a Novel Thermal Energy Storage Unit with Phase Change Material

Numerical simulation and optimization of compact latent heat exchanger with micro-channel plate in shape-stabilized composite phase change material

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental Investigations on the Thermal Energy Storage Performance of Shell and Tube Unit with Composite Phase Change Materials

3D Numerical Analysis of a Phase Change Material Solidification Process Applied to a Latent Thermal Energy Storage System

Numerical investigation of dynamic melting process in a thermal energy storage system using U-tube heat exchanger

Numerical Simulation of Thermal Performance and Thermal Stress of Latent Heat Storage System with Various Fins

Thermal performance enhancement of energy storage system using spiral-wired tube heat exchanger

An experimental investigation on the heat transfer characteristics of cascaded thermal storage units based on multichannel flat tubes

Experimental and numerical analysis of a phase change material-based shell-and-tube heat exchanger for cold thermal energy storage

Heat transfer of a shell and tube sodium acetate trihydrate heat storage tank

Experimental and Modeling Study on Thermal Performance of Hydrated Salt Latent Heat Thermal Energy Storage System

Experimental and numerical research on thermal characteristics of phase change thermal storage device

Experimental Study of a Heat Transfer Characteristics of a Molten Salt Energy Storage/Retrieval System