Abstract:Carboxylic acids make up a well-known group of organic friction modifiers (OFMs). OFMs can present different types of polar heads that can eventually lead to different surface adsorption properties and tribological responses. Therefore, the goal of this work is to study the effects of the polar head type on the frictional and wear performances of carboxylic acids in a water-based lubricant. Lauric acid (C12) was chosen as the reference OFM, and methyl laurate and monolaurin were chosen for the comparison. Sliding friction tests were performed on stainless steel against alumina balls under boundary lubricating conditions. The effect of the adsorbed layers and the tribofilm formation was studied by varying the initial maximum hertzian contact pressure, i.e., tests were performed at 1.97 and 0.66 GPa. At the lowest contact pressure, not enough load is applied to obtain enough plastic deformation on the asperity contacts. In this case, a combination of asperity contacts and a thick fluid film formation results in a lack of tribofilm formation, whereas at the highest contact pressure, tribofilms are formed in the asperity contact through tribochemical reactions. Methyl laurate showed no adsorption on the surface, and it was not tested further. C12 and monolaurin showed good adsorption, but the adsorbed layers had different viscoelastic properties. Micro and macrotribological tests showed good frictional behavior for C12 at 0.5 wt % concentration due to the good viscoelastic properties of its adsorbed layer. The adsorbed layer of monolaurin did not show good friction-reducing ability during the micro tribological tests due to its poorer viscoelastic properties. However, the macro tribological tests revealed that monolaurin forms a robust tribofilm protecting the surface from wear and efficiently reducing friction at a concentration of 0.5 wt % resulting in the lowest wear and friction values as observed in this study.

Effects of Conformational Entropy on Antiwear Performances of Organic Friction Modifiers

Influence of structural factors on the tribological performance of organic friction modifiers

On the Structure–Activity Relationship of Glyceryl oleate Friction Modifiers and Its Synergistic Mechanism on Phosphate ester Antiwear Additives

The impact of organic friction modifiers on engine oil tribofilms

Friction and Wear Protection Performance of Synthetic Siloxane Lubricants

Nonequilibrium molecular dynamics investigation on friction behavior of organic friction modifiers under dynamic load

Boundary slip and lubrication mechanisms of organic friction modifiers with effect of surface moisture

Effect of functional groups on tribological properties of lubricants and mechanism investigation

Digging into the friction reduction mechanism of organic friction modifiers on steel surfaces: Chains packing vs. molecule–metal interactions

Preparation and Tribological Study of Novel Amide-based Organic Friction Modifiers

The Synergistic Antiwear and Frictional Properties of Organic Molybdenum Compound with Zinc Dialkyldithiophosphate

Tribological mechanisms of the synergistic effect between sulfur- and phosphorus-free organic molybdenum and ZDDP

Effects of Chemical Composition and Morphological Structure of Surface Oxides on the Antifrictional Properties of Medium Carbon Steel

The Relationship Between Surface Structure and Super-Lubrication Performance Based on 2D MOFs

Effects of molecular structures of poly α-olefin mixture on nano-scale thin film lubrication

Study on the effect of glycerol monoisostearate friction modifier on anti-shudder performance of ATF

Competitive Molecular Interaction between Zinc Dialkydithiophosphate (ZDDP) and Methyl Oleate along Boundary Lubrication Regime

Synergistic effects between sulfur- and phosphorus-free organic molybdenums and ZDDP as lubricating additives in PAO 6

Effect of the Polar Head Type on the Surface Adsorption and Tribofilm Formation of Organic Friction Modifiers in Water-Based Lubricants

Study on the relationship between the tribological properties and oxidation degree of graphene derivatives in O/W emulsion

Effect of lubricant functional groups on tribological properties of epoxy/graphene composites