A Necessary Model to Quantify the Scanning Loss Effect in Spaceborne Ignss-R Ocean Altimetry.

Zongqiang Liu,Wei Zheng,Fan Wu,Zhen Cui,Guohua Kang
DOI: https://doi.org/10.1109/jstars.2020.3046729
IF: 4.715
2020-01-01
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Abstract:When the interferometric global navigation satellite system reflectometry (iGNSS-R) altimeter receives the direct and reflected signals through the digital multibeam phased array antenna, the roll-off of element radiation pattern will cause the scanning loss of directivity. If the scanning loss is neglected, the ocean altimetric precision will be biased with possible consequences for the instrument design. This article carries out the following research on this. First, based on the geometry of iGNSS-R altimetry and the principle of phased array antenna beamformer, the scanning loss model with the elevation angle at the specular point as a parameter is established. Second, this article uses the measured data of the phased array antenna to verify the model, and the result shows that the simulated value is in good agreement with the measured value, with an average deviation of 0.07 dB. Third, taking the GPS L1 signal (full composite) as an example, the model is used to analyze the influence of the scanning loss on the iGNSS-R altimetric precision estimation. The research results show that when the phased array antenna synthesizes four beams for iGNSS-R altimetry, the comprehensive effect of scanning loss on altimetric precision estimation is 0.16 m. The influence of scanning loss should be considered in the future high-precision iGNSS-R altimetry instrument design.
What problem does this paper attempt to address?