An Experimental and Theoretical Investigation into the “Worm-Hole” Effect
Liang Zhao,Jiancang Su,Xibo Zhang,Yafeng Pan,Limin Wang,Jinpeng Fang,Xu Sun,Rui Li,Bo Zeng,Jie Cheng
DOI: https://doi.org/10.1063/1.4818446
IF: 2.877
2013-01-01
Journal of Applied Physics
Abstract:On a nanosecond time scale, solid insulators abnormally fail in bulk rather than on surface, which is termed as the “worm-hole” effect. By using a generator with adjustable output pulse width and dozens of organic glass (PMMA) and polystyrene (PS) samples, experiments to verify this effect are conducted. The results show that under short pulses of 10 ns, all the samples fail due to bulk breakdown, whereas when the pulse width is tuned to a long pulse of 7 μs, the samples fail as a result of surface flashover. The experimental results are interpreted by analyzing the conditions for the bulk breakdown and the surface flashover. It is found that under short pulses, the flashover threshold would be as high as the bulk breakdown strength (EBD) and the flashover time delay (td) would be longer than the pulse width (τ), both of which make the dielectrics' cumulative breakdown occur easily; whereas under long pulses, that Ef is much lower than EBD and td is smaller than τ is advantageous to the occurrence of the surface flashover. In addition, a general principle on solid insulation design under short pulse condition is proposed based on the experimental results and the theoretical analysis.