Grain-Oriented Ferroelectric Ceramics with Single-Crystal-like Piezoelectric Properties and Low Texture Temperature
Yunfei Chang,Jie Wu,Zhen Liu,Enwei Sun,Linjing Liu,Qiangwei Kou,Fei Li,Bin Yang,Wenwu Cao
DOI: https://doi.org/10.1021/acsami.0c11680
2020-08-04
Abstract:High-performance piezoelectrics are pivotal to various electronic applications including multilayer actuators, sensors, and energy harvesters. Despite the presence of high Lotgering factor <i>F</i><sub>001</sub>, two key limitations to today's relaxor-PbTiO<sub>3</sub> textured ceramics are low piezoelectric properties relative to single crystals and high texture temperature. In this work, Pb(Yb<sub>1/2</sub>Nb<sub>1/2</sub>)O<sub>3</sub>-Pb(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>-PbTiO<sub>3</sub> (PYN-PMN-PT) textured ceramics with <i>F</i><sub>001</sub> ∼ 99% were synthesized at only 975 °C through liquid-phase-assisted templated grain growth, where of particular significance is that single-crystal properties, i.e., very large electrostrain <i>S</i><sub>max</sub>/<i>E</i><sub>max</sub> ∼ 1830 pm V<sup>–1</sup>, giant piezoelectric figure of merit <i>d</i><sub>33</sub> × <i>g</i><sub>33</sub> ∼ 61.3 × 10<sup>–12</sup> m<sup>2</sup> N<sup>–1</sup>, high electromechanical coupling <i>k</i><sub>33</sub> ∼ 0.90, and Curie temperature <i>T</i><sub>c</sub> ∼ 205 °C, were simultaneously achieved. Especially, the <i>S</i><sub>max</sub>/<i>E</i><sub>max</sub> and <i>d</i><sub>33</sub> × <i>g</i><sub>33</sub> values correspond to ∼180% enhancement as compared to the regularly 1200 °C-textured ceramics with <i>F</i><sub>001</sub> ∼ 96%, representing the highest values ever reported on piezoceramics. Phase-field simulation revealed that grain misorientation has a stronger influence on piezoelectricity than texture fraction. The ultrahigh piezoelectric response achieved here is mainly attributed to effective control of grain orientation features and domain miniaturization. This work provides important guidelines for developing novel ceramics with significantly enhanced functional properties and low synthesis temperature in the future and can also greatly expand application fields of piezoceramics to high-performance, miniaturized electronic devices with multilayer structures.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11680?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11680</a>.Detailed XRD patterns of the ground ceramic powders; XRD rocking curves of the textured ceramics; schematic diagrams of the domain configurations; simulated polarization distributions in nontextured and textured ceramics; and refs <a class="ref ref50" href="">(50)</a> for some corresponding data in <a class="internalNav" href="#fig3">Figure </a><a class="internalNav" href="#fig3">3</a>a–c (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11680/suppl_file/am0c11680_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology