Abstract:To reduce carbon emissions associated with substantial concrete usage in construction and achieve the objectives of green and low-carbon construction, this study innovatively develops a low-carbon binary material by adding limestone powder (LP) and silica fume (SF) into the conventional cement-based material, enhancing the comprehensive utility value of LP. The experimental results show that the addition of 15% LP and 5% SF increases the yield stress of the mortar yet substantially reduces the plastic viscosity to 2.84 Nmm·min, representing a 44.5% decrease compared to pure cement slurry. This reduction is conducive to long-distance pumping of the cement-based material. Moreover, the addition of 5% SF compensates for the 18.8% (mid-stage, 28-d) and 15.8% (late-stage, 90-d) strength loss in mortar caused by LP while simultaneously improving the strength of the co-mixed system by 10.4% (mid-stage) and 10.8% (late-stage). In the early-stage measurements of the LP-SF binary cement-based materials, it is observed that while SF slightly increases the hydration heat release, LP suppresses the early hydration heat release. Therefore, the total heat release observed in the 15% LP and 5% SF group after 72 h is only 254 J/g, demonstrating favorable temperature control and crack prevention effects. In addition, X-ray diffraction (XRD) and thermogravimetric/differential thermogravimetric (TG/DTG) phase analysis reveal a notable increase of 53.56% in CH consumption. Besides, the weight loss on ignition of C-S-H crystals increases, indicating that the secondary hydration of LP and the pozzolanic reaction of SF promote the production of C-S-H in the system. Combined with the late-stage strength and water absorption characteristics, it is concluded that the system exhibits good mechanical properties and compactness. This study presents a use of mixed proportion that enables excellent mechanical properties, good pumping performance, and low hydration heat. Moreover, the analysis indicates that the carbon emission of each cubic meter of the as-developed mortar is reduced by approximately 16.7–23.9%, promoting the efficient and clean utilization of LP and SF.

Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials

Fractal Dimension of Concrete Incorporating Silica Fume and Its Correlations to Pore Structure, Strength and Permeability

Impact of Silica Fume on the Long-Term Stability of Cement-Based Materials with Low Water-to-binder Ratio under Different Curing Conditions

Effect of Adding Solid Waste Silica Fume As a Cement Paste Replacement on the Properties of Fresh and Hardened Concrete

Effects of Multi-scale Siliceous Additives on Hydration and Microstructure of Hardened Cement Pastes

Effect of Dosage of Silica Fume on the Macro-Performance and Micro/nanostructure of Seawater Portland Cement Pastes Prepared with an Ultra-Low Water-to-binder Ratio

Influence of Silica Flour–silica Fume Combination on the Properties of High Performance Cementitious Mixtures at Ambient Temperature Curing

Hydration and Fractal Analysis on Low-Heat Portland Cement Pastes Using Thermodynamics-Based Methods

Hydration Kinetics and Apparent Activation Energy of Cement Pastes Containing High Silica Fume Content at Lower Curing Temperature

The Hydration and Microstructure of Ultra High-Strength Concrete with Cement–silica Fume–slag Binder

Environmental Evaluation, Hydration, Pore Structure, Volume Deformation and Abrasion Resistance of Low Heat Portland (LHP) Cement-Based Materials

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

Shrinkage Properties of Cement-Silica Fume Blended Pastes in Early Age

Hydration and Mechanical Properties of High-Volume Fly Ash Concrete with Nano-Silica and Silica Fume

Study on the Influence of Silica Fume (SF) on the Rheology, Fluidity, Stability, Time-Varying Characteristics, and Mechanism of Cement Paste

Uncovering the role of hydrophobic silica fume (HPS) in rheology, hydration, and microstructure of ultra-high-performance concrete (UHPC)

Synergistic Effect of Silica Fume and Ultra-Fine Glass Microsphere on Macro Properties and Hydration of Coarse-Aggregate UHPC

Effect of Silica Fume and Hydroxyethyl Methyl Cellulose on the Properties of Cement-Sodium Silicate Grout at High Temperatures

Influence of Silica Fume Content on Microstructure Development and Bond to Steel Fiber in Ultra-High Strength Cement-Based Materials (UHSC)

The Dispersion and Hydration Improvement of Silica Fume in UHPC by Carboxylic Agents

Influence of MgO on the Hydration and Shrinkage Behavior of Low Heat Portland Cement-Based Materials via Pore Structural and Fractal Analysis