The Development of a Monitoring System for Low-Temperature Live Fish Transportation
Shaowu NIE,Yuanqian HONG,Hanying HUANG,Xuan LI,Yuelai HU,Shanbai XIONG,Siming ZHAO
DOI: https://doi.org/10.11758/yykxjz.20140417
2014-01-01
Abstract:The most of current live fish transportation devices are designed using single chip microcomputer control system or manual control system. These devices cannot meet the need for long-distance transportation due to their low level of automation and poor anti-interference ability. To improve the automatic control of the low-temperature live fish transportation and the survival rate of live fish, we designed a special control system with a PLC as the core controller and a touch screen as the human-computer interface. The software and hardware of this system were designed for the start/stop control. The PPI communication network, based on the PID algorithm and the pulse timer, could conduct automatic and reliable data collection and the feedback control of key parameters such as the temperature, DO, and pH. The control ranges of the three parameters were 3-35℃, 8-13 mg/L, and 6.5-8.0 respectively. The temperature was uniform in the tank, and rose and dropped slowly and gently. When the system was unloaded, the deviation of temperature was only 1℃, and temperature rose and dropped at 2.5℃/h and 2.3℃/h respectively. After 72-hour transportation, the survival rate ofMegalobrama amblycephalawas as high as 96.7% under conditions below: the mass ratio of fish to water was 1:2, the temperature was 6.7-7.3℃, the pH was 6.5-7.5, andDO was 8.9-12.8 mg/L. The system had the advantage of stable performance, high reliability, friendly human-machine interface, and flexible operation. These enabled this system to meet the requirement of the water quality during the transportation of different fish species in different regions.