Abstract:Pavement surface texture features are one of key factors affecting the skid resistance of pavement. In this study, a set of stable and reliable texture measurement equipment was firstly assembled by using the linear laser ranging sensor, control system and data acquisition system. Secondly, the equipment was calibrated, and the superposition error of sensor and control system was tested by making a standard gauge block. Thirdly, four different kinds of asphalt mixture were designed, and their surface texture features were obtained by leveraging a three-dimensional laser scanner. Therefore, the surface texture features were characterized as one-dimensional profile features and three-dimensional surface features. At the end of this study, a multi-scale texture feature characterization method was proposed. Results demonstrate that the measurement accuracy of the laser scanning system in the x-axis direction can be controlled ranging from −0.01 mm to 0.01 mm, the resolution in the XY plane is 0.05 mm, and the reconstructed surface model of surface texture features can achieve a good visualization effect. They also show that the root mean square deviation of surface profiles of different asphalt pavements fluctuates greatly, which is mainly affected by the nominal particle size of asphalt mixture and the proportion of coarse aggregate, and the non-uniformity of pavement texture distribution makes it difficult to characterize the roughness of asphalt pavement effectively by a single pavement surface profile. This study proposed a texture section method to describe the 3D distribution of road surface texture at different depths. The macrotexture of the road surface gradually changes from sparse to dense starting from the shallow layer. The actual asphalt pavement texture can be characterized by a simplified combination model of “cone + sphere + column”. By calculating the surface area distribution of macro and microtextures of different asphalt pavements, it was concluded that the surface area of asphalt pavement under micro scale is about 1.8–2.2 times of the cutting area, and the surface area of macrotexture is about 1.4 times of the cutting area. Moreover, this study proposed texture distribution density to characterize the roughness of asphalt pavement texture at different scales. The SMA index can represent the macroscopic structure level of different asphalt pavements to a certain extent, and the SMI index can well represent the friction level of different asphalt pavements.

A Contribution to Texture Analysis of Pavements under Simulated Polishing: Some New Findings

Study on the Influence of Tire Polishing on Surface Texture Durability and Skid Resistance Deterioration of Asphalt Pavement

Evolution characteristics of the surface texture of the wearing course on asphalt pavement based on accelerated pavement polishing

Characterization of Road Surface Topography Changes During Polishing Process with Characteristic Roughness Parameter

Evolution of texture and skid resistance change of high-friction surface due to differential-polishing undergoing simulated traffic wear

Relation of homogeneity and mechanical response of asphalt pavements

Evaluation of Polishing Behavior of Fine Aggregates Using an Accelerated Polishing Machine with Real Tires

Study of Pavement Micro- and Macro-Texture Evolution Due to Traffic Polishing Using 3D Areal Parameters

Research on the polishing process of aggregates on pavement surface on basis of mineral characteristics

Influence of temperature on polishing behaviour of asphalt road surfaces

Comparison of the Polishing Resistances of Concrete Pavement Surface Textures Prepared with Different Technologies Using the Aachen Polishing Machine

Wear Behavior Analysis and Study on Skid Resistance on SMA Pavement

Numerical determination of pavement mean texture depths at different degrees of traffic polishing-induced wear

Influence of Different Polishing Conditions on the Skid Resistance Development of Asphalt Surface

Evolution of Aggregate Surface Characteristics in Polishing Process

Development Of Aggregate Micro-Texture During Polishing And Correlation With Skid Resistance

Optimization of Long-Term Skid Resistance on Asphalt Concrete Pavement

Understanding the Pavement Texture Evolution of RIOH Track Using Multi-Scale and Spatiotemporal Analysis

Reconstruction and evolution of 3D model on asphalt pavement surface texture using digital image processing technology and accelerated pavement testing

Investigating Intrinsic Factors in Pavement Skid Resistance Deterioration Using an Integrated Tribology Model

Assessing Surface Texture Features of Asphalt Pavement Based on Three-Dimensional Laser Scanning Technology