Optimization of Gas Production from Marine Methane Hydrate Deposit Induced by Horizontal Well
Han Yu,Tianfu Xu,Xin Xin,Yilong Yuan,Guanhong Feng,Qiang Chen,Zhe Yu
DOI: https://doi.org/10.1021/acs.energyfuels.0c03868
2021-01-20
Abstract:Methane hydrate (MH) has attracted increasing interest as one potential alternative clean energy. However, creating efficient MH field tests is a great challenge faced by the industry. It requires a huge capital investment and hence calls for the proper planning, design, and development of the production system. The use of horizontal wells for gas extraction in reservoirs has been verified in field tests in the South China Sea (SCS) in 2020. Thus, in this study, we numerically investigated gas production from a 3-D hydrate reservoir by depressurization with a horizontal well. For the silt-clayed methane hydrate-bearing sediments (MHBS) at site W11 of the SCS, the advantageous horizontal well design was analyzed for gas production from the low permeability hydrate reservoir through depressurization. Key parameters (well length, well placements, and depressurization) for production well designs are considered in this study for the horizontal well production system. In order to obtain the global optimal solution, Box-Behnken Design with Response Surface Methodology (BBD-RSM) was introduced to derive the optimal production system with a surrogate model. The results indicate that the placement of a horizontal well can significantly affect methane gas recovery volume and gas recovery efficiency. Considering the excess formation water inflow problem and the production efficiency, the optimization analyses show the results for well length and placement at 365 days and 1800 days is <i>L</i> = 494.38 m and <i>Z</i> = −77.20 m and <i>L</i> = 399.85 m and <i>Z</i> = −70.04 m, respectively. This study may provide a technical support tool and method for long-term gas production analysis and design.This article has not yet been cited by other publications.
energy & fuels,engineering, chemical