Abstract:Ultrahigh field systems ( ≥ 7 T) can increase the signal-to-noise ratio of magnetic resonance imaging (MRI), improving imaging performance compared to systems with lower fields. However, these enhancements heavily rely on a high B0 magnetic field homogeneity level, which can be achieved through superconducting shimming. This paper presents a novel two-stage superconducting shimming method designed to achieve precise shimming for a 7 T MRI superconducting magnet. In the initial stage, detailed measurements and fittings were conducted to determine the current polarity and the axial or circumferential positions of the shim fields. Subsequently, an optimization strategy was implemented to determine the optimal shim currents with a flexible target field. The second stage involves an iterative process to fine-tune the current of a specific shim coil, identified as having the most significant impact on field homogeneity. The overall fitness of 99.5% underscores the precision in determining the current polarity and position of the shim fields. Significantly, the calibrated shim system substantially improves the peak-to-peak and Root Mean Square Error (RMSE) field homogeneities from 107.42 ppm and 37.00 ppm to 11.12 ppm and 3.26 ppm, respectively, representing improvements of 89.65% and 91.19%. Furthermore, the simulation results of the fine-tuning stage demonstrate additional enhancements in peak-to-peak field homogeneity, to 9.9 ppm by reducing the current of the Z2 shim coil by 51.3 mA. Additionally, the shimmed magnetic field exhibited high time stability, with a maximum variation of only 27 μT observed within 48 h. Thus, the proposed two-stage superconducting shimming framework effectively addresses the challenge of imperfect B0 magnetic fields, enhancing peak-to-peak and RMSE field homogeneity. The stepwise optimized approach also mitigates deviations caused by shim-to-shim coupling, demonstrating its efficacy in achieving precise shimming in ultrahigh-field MRI systems.

Radial Magnetic Field Optimization of the 5 T Superconducting Cyclotron for Medical Application

The Optimal Target Magnetic Field Method for Passive Shimming in MRI

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Construction Progress of Two Superconducting Cyclotrons for Proton Therapy and Proton Irradiation at CIAE *

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Design and Construction of the Main Magnet for a 230-MeV Superconducting Cyclotron

Quench Safety Simulation and Verification of Superconducting Coils for the SC200 Superconducting Cyclotron

Field Mapping System Design for the Superconducting Cyclotron CYCIAE-230

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Train probe for beam diagnostics of the SC200 superconducting cyclotron

Implementing a Two-Stage, Shim Field-Calibrated Superconducting Shimming Method on a 7t Cryogen-Free Small Animal MRI Magnet

Optimization design of the cavity tuning and RF input coupler for an 11 MeV superconducting cyclotron

Axial Magnetic Field Distribution Simulation and Optimization in Rotating Magnetron Sputtering System

Innovative 20-MeV Superconducting Cyclotron for Medical Applications

Developments for 230 MeV superconducting cyclotrons for proton therapy and proton irradiation

Implementing a two-stage, shim field-calibrated superconducting shimming method on a 7 T cryogen-free small animal MRI magnet

Superconducting Shim Coils Design for the 9.4 T Whole-Body MRI Magnet

Design and Magnetic Field Measurement of the Superconducting Magnets for the Next-Generation Rotating Gantry

Conceptual Design of the SC230 Superconducting Cyclotron for Proton Therapy

Design of the Magnetic Shielding for 166 MHz and 500 MHz Superconducting RF Cavities at High Energy Photon Source

Multi-physics Analysis and Experiment of a CW Four-Rod RFQ