On the Effective Stress Coefficient of Single Rough Rock Fractures

Zhihong Zhao,Sicong Chen,Yuedu Chen,Qiang Yang

DOI: https://doi.org/10.1016/j.ijrmms.2020.104556

IF: 6.849

2021-01-01

International Journal of Rock Mechanics and Mining Sciences

Abstract:The effective stress coefficient is critical to accurately predict the hydromechanical coupling behavior of single water-bearing rock fractures. The physical meaning of the effective stress coefficient in a rough rock fracture is understood as the ratio of the nominal fracture surface occupied by water to the total fracture surface area. To overcome the difficulty of measuring contact ratio changes in rough rock fractures under normal loading and water pressure, a new effective stress coefficient model for single rough water-bearing fractures is proposed in terms of two mechanical parameters, initial normal stiffness and maximum normal closure. By incorporating the new effective stress coefficient model into the Barton-Bandis constitutive model, a hydromechanical coupling model was built and verified by laboratory and in-situ experimental data. The results indicate that the effective stress coefficient is less than 1 for single rough rock fractures and decreases with increasing difference between normal stress and water pressure. When the normal stress is close to or considerably higher than the fracture water pressure, both the newly built model and Terzaghi's model obtain similar normal displacement. However, for moderate normal stress, the normal displacements predicted by the newly built model and Terzaghi's model differ significantly. The implications of the newly built model in subsurface engineering are discussed.