Abstract:Sediment flow and transport in natural rivers are of considerable interest in the field of river engineering. Generally, there are many channel bends in natural rivers. The flow characteristics and sediment movement are much more complex in channel bends than in straight channels. In order to study the development of water-sediment movement in channel bend, a three-dimensional k-ε-kp solid-liquid two-phase two-fluid turbulence (STTT) model in curvilinear coordinates is solved numerically with a finite-volume method on an adaptive grid. The k-ε-kp STTT model was introduced by Zhou and it consists of a Boussinesq expression with scalar viscosity coefficients to model STTT Reynolds stresses and particle turbulence flux. The water flow in an S-shaped flume was first used to verify liquid-phase model and the velocities of water flow were well reproduced by the model. The secondary flow has different magnitude along the S-shaped flume. Then the model was used to calculate the movements of water and sediment in a 120° channel bend. From both experimental data and numerical results, it was shown that the sediment shares the same streamlines of water in the straight zone and deviates from the streamlines of water at the channel bend. The deviation increases with the increase of sediment particle diameters. The numerical results of solid-liquid two-phase flow in an S-shaped flume have shown that the longitudinal velocities of solid-phase are bigger than those of liquid-phase near walls and smaller than those of liquid-phase in other zones, while the transverse velocities of solid-phase are smaller than those of liquid-phase, and the vertical velocities are almost equal to fall velocities of sediments in straight sections and change much in the bends under the action of helical flows. In addition, the concentration of sediment is bigger in the bottom than that in the surface and also bigger in the inner bank of the S-shaped flume than that in the outer bank.

3-D Turbulent Model of Meandering River in Non-Orthogonal Curvilinear Coordinates

Application of 3-D RNG Κ-Ε Turbulence Model of Meandering River

3-D Numerical Simulation on Overbank Flows in Compound Channels

THREE-DIMENSIONAL SIMULATION OF MEANDERING RIVER BASED ON 3-D RNG K-Ε TURBULENCE MODEL

Three-Dimensional Mathematical Model Of Suspended-Sediment Transport

Numerical simulation of flow pattern in meandering rivers

A Three-dimensional K-Ε-ap Two-Phase Turbulence Overall Sediment Transport Model in Non-Orthogonal Curvilinear Coordinates

A 3D MODELING OF WATER-SEDIMENT TWO-PHASE MOVEMENT IN FLAT-BED CHANNEL BENDS

3-D Numerical Simulation of Meander Migration under Different Flow Conditions

A Non-Horizontal Multi-Layer Numerical Model for the Flow in Natural Rivers

Three-dimensional Numerical Modeling of Secondary Flows in a Wide Curved Channel

Study on the characteristics of flow movement in branching river

A Three Dimensional Mathematical Modeling for the Jingjiang River

Algebraic-stress Turbulent Model for 2-D Plane Flow in Curvilinear Coordinates

2D mathematical model for water-sediment between Wakouzi-Majiazui reach in the middle reaches of the Yangtze River

3-D Numerical Flow Model in Curvilinear Coordinates with Collocated Grid

A Three-Dimensional Water-Sediment Turbulence Model with the Effect of Vegetation in Curvilinear Coordinates

Formation Process of Meandering Channel by a 2D Numerical Simulation

3D Mathematical Modeling for Fluvial Processes Considering Bank Erosion

3-D suspended-load model and moveable river bank tracking. Part 1, sediment model

Three-dimensional Mathematical Model and Its Application in the Neighborhood of the Three Gorges Reservoir Dam in the Yangtze River