Abstract:Fluoride phosphors as red components for warm white LEDs have attracted a tremendous amount of research attention. But these phosphors are extremely sensitive to moisture, which seriously limits their practical industrial applications. To tackle this problem, unlike all the straightforward preventive strategies, a reverse strategy "Good comes from bad" was successfully developed to treat the degraded K2 SiF6 : Mn4+ (D-KSFM) phosphor in the present study, which not only completely restores the luminescence properties, but also significantly enhances the moisture resistance at the same time. After treatment with an oxalic acid solution as restoration modifier, the emission intensity of the D-KSFM phosphor can be restored to 103.7% of the original K2 SiF6 : Mn4+ red phosphor (O-KSFM), and the moisture resistance is remarkably improved. The restored K2 SiF6 : Mn4+ (R-KSFM) maintains approximately 62.3% of its initial relative emission intensity after immersing in deionized water for 300 min, while the reference commercial K2 SiF6 : Mn4+ with a protective coating (C-KSFM) is only 33.2%. As a proof of general applicability, this strategy was also conducted to K2 TiF6 : Mn4+ phosphor, which is less moisture-stable than K2 SiF6 : Mn4+ . The luminescence intensity of the degraded K2 TiF6 : Mn4+ (D-KTFM) phosphor can be restored to 162.6% of original level of the K2 TiF6 : Mn4+ synthesized through a cation exchange approach without any treatment (O-KTFM). The emission intensity of the restored K2 TiF6 : Mn4+ (R-KTFM) phosphor retains 62.8% of its initial emission intensity after soaking in deionized water for 300 min. Finally, the R-KSFM phosphors were packaged into white light-emitting diodes with blue InGaN chips and Y3 Al5 O12 : Ce3+ yellow phosphors. The WLEDs display excellent color rendition with higher color rendering index, lower color temperature (WLED-II: Ra =83.6, R9 =57.3, 3743 K, ηl =199.68 lm/W; WLED-III: Ra =90.4, R9 =94.2, 2892 K, ηl =183.3 1 m/W). The above results show that the reverse strategy can be applied in those phosphor materials with poor moisture resistance to restore luminescence properties and improve moisture resistance without excessively care about the deterioration during the production, storage and transportation.

Enhancing Structural Rigidity Via a Strategy Involving Protons for Creating Water-Resistant Mn4+-Doped Fluoride Phosphors

Enhancing Hydrophobicity in Mn4+‐Doped Organometallic Fluoride with High Quantum Efficiency through the Utilization of Trimethylsulfoxide Cation

Advancing Red-Emitting Fluoride Phosphors for Highly Stable White Light-Emitting Diodes: Crystal Reconstruction and Covalence Enhancement Strategy

Reductant-optimized exchange strategy to construct the water-resistant shell of Mn4+-doped phosphors

A facile in situ surface-coating passivation strategy for improving the moisture resistance of Mn4+-activated fluoride red phosphor

Enhancement of the luminescent thermal stability and water resistance of K2TiF6:Mn4+ by organic inorganic hybrid matrix and surface passivation

Mn-Activated Fluoride Phosphors Modified by Surfactant with Outstanding Water Resistance and Luminescent Thermal Properties

Waterproof Narrow-Band Fluoride Red Phosphor K2TiF6:Mn4+ Via Facile Superhydrophobic Surface Modification

Crystal field optimization and fluorescence enhancement of Mn4+-doped fluoride red phosphor with excellent stability induced by double-site metal ion replacement for warm WLED

Optimizing interstitial site luminescence via a sensitizer strategy towards green synthesis of Mn<SUP>4+</SUP>-activated fluoride phosphors

Surface passivation of red-emitting fluoride phosphors by aminocarboxyl complexants to achieve high water-resistance for light-emitting diodes

Ion exchange-assisted surface passivation toward highly stable red-emitting fluoride phosphors for light-emitting diodes

Surface Passivation Toward Highly Stable Mn4+‐Activated Red‐Emitting Fluoride Phosphors and Enhanced Photostability for White LEDs

Enhancement in the water resistance and thermal stability of Na 3 HTiF 8 :Mn 4+ by co-doping with organic amine cations

Surface lattice enhancement of red-emitting fluorides enabled by embedding small cations

A Reverse Strategy to Restore the Moisture-deteriorated Luminescence Properties and Improve the Humidity Resistance of Mn4+ -doped Fluoride Phosphors

Improved Phase Stability of the Metastable K2GeF6:Mn4+ Phosphors with High Thermal Stability and Water-Proof Property by Cation Substitution

Waterproof surface passivation of K2GeF6:Mn4+ by a dense Al2O3 layer via atomic layer deposition

A novel thiourea loading strategy for improving the moisture resistance of K2SiF6: Mn4+ red phosphors

Synthesis of a Novel Red Phosphor K2xBa1-xTiF6:Mn4+ and Its Enhanced Luminescence Performance, Thermal Stability and Waterproofness

Discovery of an Environmentally Friendly Water-Soluble Luminous Material with Interstitial Site Occupancy