Efficient Conversion of Biomass-Derived Furfuryl Alcohol to Levulinate Esters over Commercial Α-Fe2o3

Dezhang Ren,Jun Fu,Lu Li,Yunjie Liu,Fangming Jin,Zhibao Huo

DOI: https://doi.org/10.1039/c5ra24319j

IF: 4.036

2016-01-01

RSC Advances

Abstract:An efficient process for the production of levulinate esters from biomass-derived furfuryl alcohol in liquid alcohol over commercial α-Fe2O3 was firstly investigated.

What problem does this paper attempt to address?

Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Hui Yang,Feng Zhou,Hao Chen,Jing Li,Huixia Ma,Kequan Chen,Xiuyang Lu,Pingkai Ouyang,Jie Fu

DOI: https://doi.org/10.1021/acs.iecr.9b06392

2020-01-01

Industrial & Engineering Chemistry Research

Abstract:With the dwindling availability of fossil fuel resources and the dramatic increase in demand, 5-methoxymethylfurfural (MMF) obtained from renewable biomass resources has great potential as a fossil fuel alternative. In this work, a high yield (80.5%) of MMF was obtained from fructose catalyzed by Amberlyst-15 with the assistance of dimethyl sulfoxide (DMSO) in methanol at 100 degrees C for 10 h. Based on a detailed investigation of the reaction mechanism through the effects of DMSO, Amberlyst-15, reaction time, and reaction temperature on MMF yield and the existence of intermediates proved by FTIR, a two-step pathway was proposed: (1) DMSO and H ion on Amberlyst-15 act as a joint-catalyst [DMSOH](+), facilitating the dehydration of fructose into 5-hydroxymethylfurfural (HMF), and (2) [DMSOH](+) assists the etherification of HMF with methanol into MMF, which is the rate-determining step. This finding expands the concept of biomass conversion into biomass fuels and plays a vital role in catalyst screen and design, reaction medium selection, and industrial applications.
Catalytic Conversion of Furfural to Methyl Levulinate in a Single-Step Route over Zr/SBA-15 in Near-Critical Methanol

Hao Chen,Houhang Ruan,Xilei Lu,Jie Fu,Timothy Langrish,Xiuyang Lu

DOI: https://doi.org/10.1016/j.cej.2017.09.180

IF: 15.1

2017-01-01

Chemical Engineering Journal

Abstract:In the present study, an economic and environmentally friendly bi-functional catalyst, Zr-SBA-15, has been prepared to develop a single-step process for synthesis of methyl levulinate (MLA) directly from furfural (FAL) in near-critical methanol without added H2. The presence of Zr in SBA-15, the structure of the Zr-SBA-15 catalyst, and its physical properties have been determined by X-ray diffraction (XRD), N2 adsorption and desorption (N2-BET) and transmission electron microscopy (TEM). The Zr-SBA-15 catalyst has high activity for the production of MLA and good reusability. A possible reaction pathway containing two possible reaction pathways during this single-step synthesis of MLA has been proposed: the FAL has been transformed to β-Methoxy-2-furanethanol (MFE) and 2-Furfuryl methyl ether first, which then have been converted to MLA, and the conversion of FAL to MFE has been much easier and faster than that to 2-FME, which may be the major reaction pathway. The SBA-15 has given high activity for the conversion of FAL to MFE, and the incorporation of Zr has converted the MFE to MLA efficiently. The reaction of FAL to MFE to MLA has been found to be the dominant reaction. Finally, the catalyst has shown good reusability for at least five times without any reduction in the catalytic activity.
Catalytic Decomposition of Furfural Residue with Dilute Sulfuric Acid to Produce Levulinic Acid in High Temperature Liquid Water

Xiu-xiu XU,Xi-lei Lü,Jie FU,Xiu-yang Lü

DOI: https://doi.org/10.3969/j.issn.1003-9015.2015.06.014

2015-01-01

Abstract:Furfural residue as the offscum from hydrolysis of corncob is produced in large-scale but not be effectively utilized. It is an ideal feedstock for levulinic acid production as it is mainly composed by cellulose and lignin. Catalytic decomposition of furfural residue in high temperature liquid water with dilute sulfuric acid as the catalyst to produce levulinic acid was studied. The effects of liquid to solid ratio, acid concentration, reaction time and reaction temperature on levulinic acid yield were investigated. A yield of 66.6 % was achieved under the optimized reaction conditions: liquid to solid ratio 1:10, sulfuric acid concentration 2 %, reaction temperature 180℃ and reaction time 2 h. Moreover, the experimental data were fitted by first-order consecutive equations. The apparent activation energy for the hydrolysis of cellulose is 122.7 kJ?mol?1, and that for the decomposition of glucose to levulinic acid is 107.6 kJ?mol?1.
A Scalable Upgrading of Concentrated Furfural in Ethanol: Combining Meerwein–Ponndorf–Verley Reduction with in Situ Cross Aldol Condensation

Gang Li,Wenqian Jiao,Zhen Sun,Yang Zhao,Zhangping Shi,Yueer Yan,Lei Feng,Yahong Zhang,Yi Tang

DOI: https://doi.org/10.1021/acssuschemeng.7b04770

IF: 8.4

2018-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Currently, the catalytic upgrade of biomass-derived platform molecules into valuable chemicals is of great interest. In this work, an integrated route for upgrading concentrated furfural (17.3-80.5 wt %) in ethanol through the combination of Meerwein-Ponndorf-Verley reduction with in situ cross aldol condensation is developed, and the two valuable products, furfuryl alcohol and 3-(2-furyl)acrolein, are highly selectively obtained by using Zr-beta zeolite as Lewis acid catalyst and alkali metal carbonate as base catalyst. It is found that the efficient match of the two types of reactions plays a key role in upgrading furfural in this integrated process. Under optimal conditions, the highest conversion and mass conversion rate of furfural can reach up to 84.9% and 95.3 g.L-1.h(-1) respectively. This process also provides efficient separation of the two products by making use of their distinct solubilities in water.
Conversion of Furfuryl Alcohol into Ethyl Levulinate over Glucose-Derived Carbon-Based Solid Acid in Ethanol

Geng Zhao,Ming Liu,Xinkui Xia,Li Li,Bayin Xu

DOI: https://doi.org/10.3390/molecules24101881

IF: 4.6

2019-05-16

Molecules

Abstract:In this study, a carbon-based solid acid was created through the sulfonation of carbon obtained from the hydrothermal pretreatment of glucose. Additionally, ethyl levulinate, a viable liquid biofuel, was produced from furfuryl alcohol using the environmentally benign and low-cost catalyst in ethanol. Studies for optimizing the reaction conditions, such as reaction time, temperature, and catalyst loading, were performed. Under the optimal conditions, a maximum ethyl levulinate yield of 67.1% was obtained. The recovered catalyst activity (Ethyl levulinate yield 57.3%) remained high after being used four times, and it was easily regenerated with a simple sulfonation process. Moreover, the catalyst was characterized using FT-IR, XRD, SEM, elemental analysis, and acid-base titration techniques.

chemistry, multidisciplinary,biochemistry & molecular biology
Integrated catalytic process to directly convert furfural to levulinate ester with high selectivity

Bingfeng Chen,Fengbo Li,Zhijun Huang,Tao Lu,Yin Yuan,Guoqing Yuan

DOI: https://doi.org/10.1002/cssc.201300542

IF: 8.4

ChemSusChem

Abstract:Levulinic acid is an important platform molecule from biomass-based renewable resources. A sustainable manufacturing process for this chemical and its derivatives is the enabling factor to harness the renewable resource. An integrated catalytic process to directly convert furfural to levulinate ester was developed based on a bifunctional catalyst of Pt nanoparticles supported on a ZrNb binary phosphate solid acid. The hydrogenation of furfural and the following alcoholysis of furfuryl alcohol were performed over this catalyst in a one-pot conversion model. Mesoporous ZrNb binary phosphate was synthesized by a sol-gel method and had a high surface area of 170.1 m(2) g(-1) and a large average pore size of around 8.0 nm. Pt nanoparticles remained in a monodisperse state on the support, and the reaction over Pt/ZrNbPO4 (Pt loading: 2.0 wt%; Zr/Nb, 1:1) gave a very high selectivity to levulinate derivatives (91% in total). The sustainability of this conversion was greatly improved by the process intensification based on the new catalyst, mild reaction conditions, cost abatement in separation and purification, and utilization of green reagents and solvents.
Coupled Transfer Hydrogenation and Alcoholysis of Furfural To Yield Alkyl Levulinate over Multifunctional Zirconia-Zeolite-Supported Heteropoly Acid

Lincai Peng,Xueying Gao,Yao Liu,Junhua Zhang,Liang He

DOI: https://doi.org/10.1021/acs.energyfuels.0c04222

2021-02-22

Abstract:Alkyl levulinate as one kind of fuel additive and versatile biomass-based platform molecule has attracted significant interests in the field of sustainable chemistry, which can be harvested straight from furfural (FAL), an important industrial chemical derived from agricultural residues. The development of a high-efficiency and low-cost catalytic system is highly desirable toward this challenging valorization process. In this contribution, bifunctional zirconia-zeolite-supported heteropoly acid catalysts with adjustable Lewis and Brønsted acid sites were successfully designed via an in situ synthetic method and attempted to couple transfer hydrogenation and alcoholysis for one-pot conversion of FAL to alkyl levulinate. The catalyst characterization and catalytic behavior were systematically combined for insight into the structure–function relationship and reaction mechanism. Selectivity toward alkyl levulinate was found to be strongly dependent upon the distribution of acid sites. As-prepared HPMo(20)/Zr-MCM-41 with a Si/Zr molar ratio of 60 and H3[P(Mo3O10)4] (HPMo) impregnation concentration of 20 g/L was uniquely effective using isopropanol as a hydrogen donor and reaction medium, leading to a high isopropyl levulinate yield of 79.6%. This monolithic catalyst exhibited good stability and could be reused at least 5 times without any substantial change in the product yield after plain thermal regeneration.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c04222?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c04222</a>.GC–MS spectra of FAL, FOL, IPMF, IPL, and GVL (Figure S1) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c04222/suppl_file/ef0c04222_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

energy & fuels,engineering, chemical
High-yield synthesis of alkyl levulinate from furfuryl alcohol and its upgrading to 2-methyl-1,3-dioxolane over AgPW

Xiaoqing Gao,Shanhui Zhu,Hongyan Zheng,Feng Wang,Wanjun Li,Huifang Wang,Yulan Niu

DOI: https://doi.org/10.1016/j.mcat.2023.113477

IF: 4.6

2023-08-23

Molecular Catalysis

Abstract:In order to relieve greenhouse effect, it is highly urgent to convert carbon-neutral biomass to value-added chemicals and liquid fuels by designing new process. 96.5% yield of biofuel alkyl levulinate was achieved in the alcoholysis of furfuryl alcohol with ethanol over highly active Ag + exchanged H 3 PW 12 O 40 (AgPW) catalyst at low temperature. In situ XRD, 31 P MAS NMR, XPS and NH 3 -TPD results confirm that AgPW contains large amounts of strong acid sites and stable Keggin structure, resulting in the excellent performance. Subsequently, new process was developed to synthesize biofuel 2-methyl-1,3-dioxolanes (MDL) with ∼70% yields via a tandem furfuryl alcohol alcoholysis and acetalization reaction over AgPW. Additionally, MDL can be availably obtained from furfural, xylose and hemicellulose by an integrated multi-step process.

chemistry, physical
Sustainable Conversion of Biomass-Derived d -Xylose to Furfuryl Alcohol in a Deep Eutectic Solvent–Water System

Qi Li,Jia-Qiang Ren,Qing Li,Jun-Hua Di,Cuiluan Ma,Yucai He

DOI: https://doi.org/10.1021/acssuschemeng.1c02965

2021-07-21

Abstract:In this article, the feasibility of chemoenzymatically catalyzing biomass-derived d-xylose into furfuryl alcohol was verified via tandem catalysis with HCOOH and reductase in deep eutectic solvent (DES)–water media. A high furfural yield (58.3%) was achieved by catalyzing biomass-derived d-xylose (60.0 g/L) in 30 min at 180 °C with catalyst HCOOH (3.0 wt %) in the presence of DES ChCl:Gly (7.5 vol %). In addition, one newly constructed recombinant Escherichia coli CF harboring formate dehydrogenase and reductase converted d-xylose-derived furfural to furfuryl alcohol at 89.5% yield at 35 °C and pH 6.5 using HCOONa as a cosubstrate in DES ChCl:Gly–water. HCOOH was used as an acid catalyst for the dehydration of d-xylose to furfural, and its salt (HCOONa) was used as a cosubstrate for recombinant E. coli CF to catalyze the bioreduction of furfural in ChCl:Gly–water media. One effective formic acid-catalyzed conversion of biomass-derived d-xylose to furfural was successfully established for enhancing bioreduction synthesis of furfuryl alcohol using formate as a cosubstrate in DES ChCl:Gly–water under the overarching principles of sustainability. This developed chemoenzymatic catalysis strategy was green and environmentally friendly with good potential for industrial applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02965.Bioconversion of FAL to FOL by recombinant E. coli CF cells harboring FDH and CgCR in the ChCl:Gly–water system (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
One-pot conversion of biomass-derived xylose and furfural into levulinate esters via acid catalysis.

Xun Hu,Shengjuan Jiang,Liping Wu,Shuai Wang,Chun-Zhu Li

DOI: https://doi.org/10.1039/c7cc01078h

IF: 4.9

2017-01-01

Chemical Communications

Abstract:Direct conversion of biomass-derived xylose and furfural into levulinic acid, a platform molecule, via acid-catalysis has been accomplished for the first time in dimethoxymethane/methanol. Dimethoxymethane acted as an electrophile to transform furfural into 5-hydroxymethylfurfural (HMF). Methanol suppressed both the polymerisation of the sugars/furans and the Aldol condensation of levulinic acid/ester.
Single-step Zr-SBA-15 catalytic conversion of furfural to ethyl levulinate in near-critical ethanol

Xilei Lü,Houhang RUAN,Hao CHEN,Xiuyang Lü

DOI: https://doi.org/10.11949/j.issn.0438-1157.20171463

2018-01-01

Abstract:Ethyl levulinate (ELE), a widely used organic chemical compound, can be produced from hydrogenation and alcoholysis of furfural (FAL). However, such processes have some shortcomings of long two-step process, large H2consumption, and high cost. A single-step catalytic conversion of FAL to ELE over Zr-SBA-15 in near-critical ethanol was proposed with no H2consumption. Among seven Zr-SBA-15 catalysts prepared with different Si/Zr molar ratios, Zr-SBA-15-10 (Si/Zr=10) exhibited best catalytic activity for FAL conversion to ELE. Further study of catalyst loading, ethanol amount, reaction temperature and time lead to an optimal operating condition, which 99.9% conversion of FAL and 47.4% yield of ELE was achieved in a mixture of 100 mg FAL and 50 mg catalyst in 7 ml ethanol at 220℃ for 3 h. The catalyst maintained good activity over four cycles of repeated use with no significant structural changes between fresh and 5th cycle used catalysts, which were characterized with XRD, N2-BET and TEM. A two reaction pathway reaction mechanism was proposed with catalytic hydrogen transfer as the major one, which was different from that of catalytic conversion of FAL to methyl levulinate in near-critical methanol.
Selective Aldol Condensation of Biomass-Derived Levulinic Acid and Furfural in Aqueous-Phase over MgO and ZnO

Guanfeng Liang,Aiqin Wang,Xiaochen Zhao,Nian Lei,Tao Zhang

DOI: https://doi.org/10.1039/c6gc00118a

IF: 9.8

2016-01-01

Green Chemistry

Abstract:MgO affords a high selectivity towards δ-furfurylidenelevulinic acid, while ZnO gives β-furfurylidenelevulinic acid as the major product in the aldol condensation of biomass-derived levulinic acid and furfural in the aqueous-phase.
Significantly enhanced bioconversion of high titer biomass-derived furfural to furfuryl alcohol by robust endogenous aldehyde reductase in a sustainable way

Junhua Di,Xiaolong Liao,Qi Li,Yu-Cai He,Cuiluan Ma,Yucai He

DOI: https://doi.org/10.1039/d3gc01417g

IF: 9.8

2023-09-28

Green Chemistry

Abstract:To date, a highly efficient manufacture of valuable biofurans from abundant, available and renewable bioresources has attracted much attentions in a sustainable way. The major aim of this study was to firstly construct an effective and sustainable route for chemoenzymatically transforming lignocellulose to furfuryl alcohol (FOL) via sequential catalysis with biocompatible biochar-based heterogeneous chemocatalyst and robust reductase biocatalyst in one-pot two-step manner. Escherichia coli cells co-expressing endogenous aldehyde reductase (ALR) from E. coli BL21(DE3) and formate dehydrogenase (FDH) from Candida boidinii were firstly constructed for efficiently transforming a high titer of furfural (FAL) (≥ 300 mM) into furfuryl alcohol after 3 h with in situ coenzyme recycling. Whole-cells of recombinant Escherichia coli FF182 harbored good bioreduction activity, which had high tolerance toward a high titer of furfural (up to 350 mM), well-known potent inhibitors against microorganisms. Molecular docking (MD) simulation indicated that the furfural molecule showed -4.4 kcal/mol binding energy at the binding site containing two hydrogen-bonds with interacting amino acid residues Gly14 and Ala178, suggesting that ALR in FF182 cell had a high affinity to furfural and good bioreduction activity. Furfuryl alcohol could be acquired at > 99% yield (analytical yield) from furfural (300 mM) by FF182 cell with HCOONa (as co-substrate) in an aqueous medium (30 oC and pH 7.0) within 3 h. Lignocellulose-valorized furfural (103.5 mM), which was obtained from the transformation of corncob by biochar-based heterogeneous chemocatalyst with 0.1 wt% of HCOOH, was fully reduced into furfuryl alcohol, with the productivity of 0.34 gram furfuryl alcohol per gram xylan in corncob. The improved substrate tolerance of FF182 cell is gaining a great interest to synthesize value-added furan-based alcohol, which has potential industrial applications.

chemistry, multidisciplinary,green & sustainable science & technology
Furfural production from lignocellulosic biomass: one-step and two-step strategies and techno-economic evaluation

Yuqi Bao,Zicheng Du,Xiaoying Liu,Hui Liu,Jinsong Tang,Chengrong Qin,Chen Liang,Caoxing Huang,Shuangquan Yao

DOI: https://doi.org/10.1039/d4gc00883a

IF: 9.8

2024-04-13

Green Chemistry

Abstract:Lignocellulosic biomass (LCB) is an abundant renewable energy resource. Hence, the conversion of biomass into fuel and platform chemicals has recently attracted considerable attention. Furfural is an important platform product, that can be produced from xylan-rich lignocellulosic biomass. Hemicellulose undergoes two stages, hydrolysis and dehydration, resulting in the production of furfural. In this review, the one-step and two-step strategies for furfural production and the subsequent techno-economic evaluation of the integration of furfural and other coproducts are presented. The direct one-step production of furfural requires a one-time investment in severe pretreatment conditions or the use of more chemicals, whereas the two-step production requires the separation of additional prehydrolysates, followed by more drastic treatment conditions. In both strategies, water flow, steam flow, organic solvents, deep eutectic solvents (DESs) or ionic liquids (ILs) can be used as solvent phases to hydrolyze hemicellulose. Lewis acid and Brønsted acid catalysts can effectively convert hemicellulose-derived pentose into furfural. A biphasic solvent system can effectively prevent the degradation of furfural in water, thus increasing the yield and selectivity of furfural. The techno-economy assessment results indicate that biorefineries are transitioning to adopting an integrate model of co-production of furfural and other products. Alternative green approaches are increasingly being adopted to make the furfural industry more sustainable and profitable.

chemistry, multidisciplinary,green & sustainable science & technology
Upgrading Biomass Derived Furan Aldehydes by Coupled Electrochemical Conversion over Silver-Based Electrocatalysts

Zhiwei Dai,Xi Liu,Nan Liu,Yichen Zhang,Xuebing Zhao

DOI: https://doi.org/10.1016/j.cej.2024.151001

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:A coupled electrolysis system with silver -based electrocatalyts was developed to achieve efficiently electrooxidation of furfural and reduction of 5-hydroxymethylfurfural (HMF) to obtain furoic acid (2 -FA) and 2,5-furandimethanol (BHMF), respectively. Ag 2 O was loaded on nickel foam (NF) by soaking in AgNO 3 solution followed by calcination resulting in preparation of Ag 2 O@NF anode. Metallic Ag was loaded on copper foam (CuF) by electrodeposition obtaining Ag@CuF cathode. The prepared silver -based electrodes were then used in a flow electrolysis cell to achieve co -production of 2 -FA and BHMF. At the optimal voltage of 1.7 V, 100 % furfural conversion with 98.9 % 2 -FA yield and 100 % HMF conversion with 98.7 % BHMF yield were obtained on anode and cathode, respectively. The coupled flow electrolysis system achieved 150.6 - 188.7 % Faradaic efficiency ( FE ) depending on the reaction time and much higher added value based on consumption of per unit of electric energy, compared with the uncoupled system. Possible mechanisms for furfural oxidation and HMF reduction were proposed. It was found that the oxidation of furfural on Ag 2 O catalysts proceeded by two -electron and single -electron pathways, with the former being the major pathway, while in the later pathway hydrogen gas was simultaneously formed on the anode. The formation of BHMF might be achieved by electrocatalytic hydrogenation (ECH) mechanism or direct electro-reduction mechanism, while ECH mechanism seems to be more preferable. Hydrogen evolution reaction (HER) was the most important competing reaction on the cathode, leading to relatively low (20 - 80 %) FE for BHMF, which was greatly dependent on the voltage applied. However, the finding of this work may provide new inspiration on electricity -driven upgrading of biomass derived aldehydes to produce high value-added products.
Efficient catalytic conversion of lignocellulosic biomass into renewable liquid biofuels via furan derivatives

jianjian wang,xiaohui liu,bicheng hu,guanzhong lu,yanqin wang

DOI: https://doi.org/10.1039/c4ra04900d

IF: 4.036

2014-01-01

RSC Advances

Abstract:Efficient production and sequential utilization of furan derivatives will provide a promising approach towards achieving renewable liquid biofuels from biomass. This study aims to investigate the simultaneous production of furfural and 5-(hydroxymethyl) furfural (HMF) from biomass and further upgrade them into biofuels. Firstly, furfural and HMF are obtained together with high yields from a mixture of C5 (xylose) and C6 (glucose) sugars, or from lignocellulosic biomass, such as birch, cornstalk, pine, bagasse, and poplar in a tetrahydrofuran (THF)/H2O-NaCl biphasic system under mild conditions. The co-existence of C5/C6 sugars or impurities in lignocellulosic biomass has little influence on the simultaneous production of furfural and HMF. Then, the generated furfural and HMF in the upper organic phase are directly used as substrates without extra separation and purification processes, and efficiently upgraded to 2-methylfuran (MF) and 2,5-dimethylfuran (DMF), both of which are considered as promising renewable liquid biofuels with high-energy content. Hence, the seamless integration of lignocellulosic biomass into renewable liquid biofuels will accelerate our society moving towards a renewable transportation economy by utilizing cheap feedstocks, mild reaction conditions, and cost saving in separation and purification.
Elucidating Pathways to Electrochemical Reduction of Furfural Via Tailoring Interfacial Environments Toward Selective Production of Valuable Furanic Chemicals

Hengzhou Liu,Deep Patel,Yifu Chen,Luke T. Roling,Wenzhen Li

DOI: https://doi.org/10.1149/ma2022-01562347mtgabs

2022-07-15

ECS Meeting Abstracts

Abstract:Electrochemical reduction of biomass-derived feedstocks holds great promise to produce value-added chemicals or fuels driven by renewable electricity. However, mechanistic understanding of the aldehyde reduction toward valuable products at the electrode/electrolyte interface at the molecular level is still lacking. Herein, we studied the furfural reduction on Pb electrodes in acid conditions and elucidated the detailed pathways toward three key products: furfuryl alcohol (FA), 2-methylfuran (MF), and hydrofuroin. First, by coupling isotopic labeling and electrokinetics, we revealed that protons (H 2 O and H 3 O + ) plays an important role in the hydrogenation pathway toward FA and MF. In particular, the study of product-selective kinetic isotopic effect of H/D and the surface property-dependent hydrogenation/deuteration pathway strongly impacted the generation of FA but not MF, which can be attributed to their different formation mechanisms: FA is produced from Langmuir-Hinshelwood pathway that need both adsorbed furfural and hydrogen, but MF produced from Eley-Rideal pathway that need proton directly from the electrolyte. Modifying the double layer by cations with large radii, we further correlated the product selectivity (FA and MF) with interfacial environments (local H 3 O + and H 2 O content, etc). Combined methods, including pulsed electrolysis, electron paramagnetic resonance (EPR) spectroscopy, and DFT calculations, further suggested that the formation of hydrofuroin and FA shared one intermediate. Hydrofuroin is produced through the desorption of the intermediate as ketyl radicals followed by its self-coupling in the electrolyte, while FA is generated from further hydrogenation of that intermediate. The acquired into the electrochemical reduction of the aldehyde group in furfural to alcohol, alkyl, and dimer may be extended to other organic compounds with carbonyl group, such as 5-hydromethylfurfural, toward a sustainable electrochemical manufacturing of higher-valued chemicals from biomass feedstock.
A critical review of recent advances in the production of furfural and 5-hydroxymethylfurfural from lignocellulosic biomass through homogeneous catalytic hydrothermal conversion

Yuan Zhao,Kaifeng Lu,Hao Xu,Lingjun Zhu,Shurong Wang

DOI: https://doi.org/10.1016/j.rser.2021.110706

IF: 16.799

2021-04-01

Renewable and Sustainable Energy Reviews

Abstract:Furan energy platform compounds including furfural and 5-hydroxymethylfurfural (HMF), can be produced by hydrothermal conversion of biomass. After hydrodeoxygenation, these furans can be converted into value-added chemicals and liquid fuels. This will help achieve efficient utilization of biomass and alleviate the environment issues caused by the overuse of fossil fuels. This review introduces the recent progress in the production of furfural and HMF from biomass and its derived sugars in homogeneous catalytic systems. The topics mainly include catalytic mechanisms, catalytic systems, and conversion processes. The synergistical catalytic effect of Lewis acid and Brønsted acid is crucial in furan production. Therefore, the development of metal salts and ionic liquids, which exhibit both kinds of acidity, has been the focus of recent attention. The type and composition of catalyst also play key roles in producing furan products. Thus, the design and improvement of the catalyst based on mechanism research will be helpful to the highly selective hydrothermal conversion of biomass. Reasonable selection of solvent system can improve the conversion efficiency significantly and avoid the occurrence of various side reactions. Especially, the online extraction of the biphasic solvent system can prevent some certain products from being consumed by the secondary reaction. Till now, the lab-scale homogeneous conversion process has been fully developed. Future research will focus on the magnification and commercialization of laboratory process. The key technical problems in the commercialization process is how to increase the recyclability, economy and eco-friendly property of the reaction system under the premise of satisfying product yield.

energy & fuels,green & sustainable science & technology
Experimental And Kinetic Study Of Arabinose Conversion To Furfural In Renewable Butanone-Water Solvent Mixture Catalyzed By Lewis Acidic Ionic Liquid Catalyst

Yuan Zhao,Hao Xu,Kaifeng Lu,Yang Qu,Lingjun Zhu,Shurong Wang

DOI: https://doi.org/10.1021/acs.iecr.9b03420

2019-01-01

Industrial & Engineering Chemistry Research

Abstract:Arabinose, the second most abundant pentose in lignocellulosic biomass, can be dehydrated to produce a well-known platform chemical named furfural. However, the lowest reactivity of arabinose among the aldopentoses in biomass has hindered its application. In this work, a butanone-water mixture as a green solvent system was employed in the production of furfural from arabinose, and a Lewis acidic ionic liquid was chosen as the catalyst. An excellent furfural yield of 60% and corresponding arabinose conversion of 100% was obtained at 140 degrees C within 30 min. The kinetic analysis indicated that the decreasing furfural yield was mainly due to the condensation reaction between furfural and the intermediate, which came from arabinose dehydration. Self-degradation of furfural played a minor role in the falling yield at prolonged reaction time. Moreover, the butanone-water solvent mixture was beneficial for increasing the activation energy of furfural degradation, and therefore, the formation of byproducts was suppressed.
Enhanced conversion of biomass to furfurylamine with high productivity by tandem catalysis with sulfonated perlite and ω-transaminase whole-cell biocatalyst

Jun-Hua Di,Lei Gong,Dong Yang,Yu-Cai He,Zheng-Yu Tang,Cui-Luan Ma

DOI: https://doi.org/10.1016/j.jbiotec.2021.05.003

IF: 3.595

2021-06-01

Journal of Biotechnology

Abstract:Production of bio-based chemicals from renewable bioresource is a key driver for moving towards sustainable industry. Furfurylamine is known as an important furfural-upgrading product in organic synthesis, as well as monolithic synthetic pharmaceuticals, fibers, additives and polymers. In one-pot manner, biomass was tandemly catalyzed to furfurylamine with sulfonated Sn-PL catalyst and recombinant ω-transaminase biocatalyst. Sn-PL (2.4 wt%) catalyzed bamboo shoot shell, corncob and rice straw (75.0 g/L) to 76.5-113.0 mM furfural at 44.7-58.5% yield in γ-valerolactone–water (2:8, v:v) at 170 ℃. The obtained biomass slurries containing furfural were biotransformed to furfurylamine at high yield (0.39-0.42 g furfurylamine/g xylan in biomass) with ω-transaminase biocatalyst using isopropylamine (3.0 mol isopropylamine/mol furfural) as amine donor at 35 ℃. Such a chemoenzymatic one-pot process combined the advantages of both solid acids and whole-cells catalysts, which provided an efficient and sustainable approach for preparing an important bio-based furan chemical furfurylamine.

biotechnology & applied microbiology

Efficient Conversion of Biomass-Derived Furfuryl Alcohol to Levulinate Esters over Commercial Α-Fe2o3

Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Catalytic Conversion of Furfural to Methyl Levulinate in a Single-Step Route over Zr/SBA-15 in Near-Critical Methanol

Catalytic Decomposition of Furfural Residue with Dilute Sulfuric Acid to Produce Levulinic Acid in High Temperature Liquid Water

A Scalable Upgrading of Concentrated Furfural in Ethanol: Combining Meerwein–Ponndorf–Verley Reduction with in Situ Cross Aldol Condensation

Conversion of Furfuryl Alcohol into Ethyl Levulinate over Glucose-Derived Carbon-Based Solid Acid in Ethanol

Integrated catalytic process to directly convert furfural to levulinate ester with high selectivity

Coupled Transfer Hydrogenation and Alcoholysis of Furfural To Yield Alkyl Levulinate over Multifunctional Zirconia-Zeolite-Supported Heteropoly Acid

High-yield synthesis of alkyl levulinate from furfuryl alcohol and its upgrading to 2-methyl-1,3-dioxolane over AgPW

Sustainable Conversion of Biomass-Derived d -Xylose to Furfuryl Alcohol in a Deep Eutectic Solvent–Water System

One-pot conversion of biomass-derived xylose and furfural into levulinate esters via acid catalysis.

Single-step Zr-SBA-15 catalytic conversion of furfural to ethyl levulinate in near-critical ethanol

Selective Aldol Condensation of Biomass-Derived Levulinic Acid and Furfural in Aqueous-Phase over MgO and ZnO

Significantly enhanced bioconversion of high titer biomass-derived furfural to furfuryl alcohol by robust endogenous aldehyde reductase in a sustainable way

Furfural production from lignocellulosic biomass: one-step and two-step strategies and techno-economic evaluation

Upgrading Biomass Derived Furan Aldehydes by Coupled Electrochemical Conversion over Silver-Based Electrocatalysts

Efficient catalytic conversion of lignocellulosic biomass into renewable liquid biofuels via furan derivatives

Elucidating Pathways to Electrochemical Reduction of Furfural Via Tailoring Interfacial Environments Toward Selective Production of Valuable Furanic Chemicals

A critical review of recent advances in the production of furfural and 5-hydroxymethylfurfural from lignocellulosic biomass through homogeneous catalytic hydrothermal conversion

Experimental And Kinetic Study Of Arabinose Conversion To Furfural In Renewable Butanone-Water Solvent Mixture Catalyzed By Lewis Acidic Ionic Liquid Catalyst

Enhanced conversion of biomass to furfurylamine with high productivity by tandem catalysis with sulfonated perlite and ω-transaminase whole-cell biocatalyst