Abstract:The presence of abundant clay components and microporous structure in shale results in its high hydrophilicity, making a water-rich environment inevitable in petroleum exploration projects. Therefore, it is crucial to consider the influence of bedding structure, moisture content, confining pressure, and their combined effects on the geomechanical properties of shale. This article aims to investigate the mechanical properties of deep shale under varying water content conditions, elucidate the failure mode and failure mechanism of shale in actual engineering scenarios, and explores the interplay between stress, structure, moisture content, and other factors on its mechanical properties. The evaluation of wellbore stability and fracture propagation effects is proposed based on laboratory experiments using triaxial stress and strain data, along with the application of energy evolution theory. The experimental procedures encompass an analysis of shale's microscopic components and structure, as well as anisotropic shale triaxial compression tests conducted under different moisture contents and confining pressures. The results demonstrate that shale exhibits dense pores in its microstructure and displays pronounced anisotropic characteristics in its macrostructure. The presence of water within these pores, combined with the in situ stress within the formation, significantly influences the mechanical properties of shale. This anisotropy decreases with increasing moisture content, but the mechanical performance still decreases. Under triaxial compression conditions, the increase in confining pressure to some extent enhances the anisotropy of shale's deformation characteristics, which is related to the failure modes of shale. However, the detrimental effect of moisture content on shale's mechanical properties still persists. In order to quantify the impact of these factors, this study utilizes the elastic modulus as an indicator of the coupling effect. It combines the triaxial strain curve obtained from laboratory tests and proposes an evaluation index for shale mechanical properties based on the energy evolution theory. This index is suitable for assessing wellbore stability (the stability index called SI r ) and crack expansion (the brittleness index called BI r ). The calculation results reveal that, during the wellbore drilling process, excavating parallel to the direction of shale bedding while maintaining low moisture content and high confining pressure yields a higher SI r value, indicating better wellbore stability. On the other hand, during reservoir fracturing, fracturing perpendicular to the shale bedding direction and maintaining low confining pressure and moisture content result in a smaller BI r value. This approach is more beneficial for the expansion of shale fracture network in engineering.

Experimental study of creep characteristics of layered water bearing shale

Study on the nonlinear time-dependent deformation characteristics and viscoelastic-plastic model of shale under direct shear loading path

Anisotropic Creep Characteristics and Mechanism of Shale under Elevated Deviatoric Stress

Uniaxial Creep Test Analysis on Creep Characteristics of Fully Weathered Sandy Shale

Experimental and damage model study of layered shale under different moisture contents

New Insights into Hydration-Induced Creep Behavior of Shale: A Comparison Study of Brittle Black Shale and Clayey Oil Shale at Micro-Scale

Creep mechanical behavior and damage model of layered slate under combined thermal-hydraulic-mechanical action

Experimental and Numerical Study of the Effects of Layer Orientation on the Mechanical Behavior of Shale

Experimental study on tensile strength of layered water-bearing shale

Investigation of the anisotropic mechanical response of layered shales

Creep Behavior of Marine Wufeng–Longmaxi Formation Shales in the Sichuan Basin, Southwest China Characterized at Micro Scale: A Case Study of Exploration Well SQ-1 in Sanquan Town, Nanchuan District, Chongqing

Study on failure characteristics and evaluation index of aquifer shale based on energy evolution

Upscaling the creep behavior of clay-rich and quartz-rich shales from nanoindentation measurements: Application to the Wufeng-Longmaxi shale, China

Study on the induced effect of bedding weakness in deep shale gas reservoir on hydraulic fractures propagation

Creep Characteristics of a Fracturing Fluid-Softened Shale Investigated by Microindentation

Experimental investigation on gas permeability in bedding shale with brittle and semi-brittle deformations under triaxial compression

Modeling the Viscoelastic Behavior of Quartz and Clay Minerals in Shale by Nanoindentation Creep Tests

Macro-meso damage and fracture model for determining the creep characteristics of shale under osmotic pressuresure

An integrated experimental and computational framework for modeling creep behavior in shale rocks induced by chemo-mechanical loading

Effect of Water-Based Working Fluid Imbibition on Static and Dynamic Compressive Properties of Anisotropic Shale

Creep and Wave Velocity Characterization on Anisotropic Consolidated Methane Hydrate Sediments of the South China Sea