Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Analysis of flow in clay using electrokinetics considering coupling driving forces

Interfacial Resistance Model for Electro-Osmotic System

Molecular Force Mechanism of Hydrodynamics in Clay Nanopores

Electroosmotic flow in soft clay and measures to promote movement under direct current electric field

Experimental Study on the Effect of Soil Saturation on the Electric Permeability Coefficient During Electroosmosis Process

Estimating Hydraulic Conductivity of Naturally Sedimented Clays Using Compression Curves

Analysis of Electro-Osmotic Flow Characteristics at Joint of Capillaries with Step Change in ζ -Potential and Dimension

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Nonlinearly coupled electro-osmotic flow in variable charge soils

Analysis of Induced-Charge Electro-Osmotic Flow in a Microchannel Embedded with Polarizable Dielectric Blocks

Pore-scale Study of Thermal Effects on Ion Diffusion in Clay with Inhomogeneous Surface Charge.

Analytical solution to heat transfer for mixed electroosmotic and pressure-driven flow through a microchannel with slip-dependent zeta potential

Induced charge effects on electrokinetic entry flow

Study of a Newtonian Fluid Through Circular Channels with Slip Boundary Taking into Account Electrokinetic Effect

Analysis of electroviscous effect and heat transfer for flow of non-Newtonian fluids in a microchannel with surface charge-dependent slip at high zeta potentials

Interface dynamics in electroosmotic flow systems with non-Newtonian fluid frontiers

Dynamic Electroosmotic Flows of Power-Law Fluids in Rectangular Microchannels

Geometrical effective medium model of electric conduction of partially saturated clays

Coupled model for electro‐osmosis consolidation and ion transport considering chemical osmosis in saturated clay soils

Theoretical Analysis and Numerical Simulation of Electroosmosis Consolidation for Soft Clay

Lattice Poisson-Boltzmann Simulations Of Electroosmotic Flows In Charged Anisotropic Porous Media