Abstract:LNG floating production storage and offloading (FPSO) unit is a new type of floating production unit developed for offshore natural gas fields. It performs the functions of natural gas extraction, pretreatment, liquefaction, and storage. In this study, the heat transfer characteristics of a spiral-wound heat exchanger were studied using numerical simulations, which provides a basis for equipment selection and structural optimization of spiral-wound heat exchangers. The main research contents and conclusions are as follows. Under land-based simulation conditions, the heat transfer coefficient of the shell side of the spiral-wound heat exchanger decreases with an increase in the winding angle of the heat exchange tube, decreases with an increase in the spacing of the heat exchange tube, and increases with an increase in the outer diameter of the heat exchange tube. When the winding angle increased from 5° to 8°, the heat transfer coefficient decreased by 6.70%. The heat transfer coefficient of the shell side decreased by 13.21% when the heat exchange tube spacing increased from 14 to 17 mm. The heat transfer coefficient of the shell side increased by 22.89% when the outer diameter of the heat exchange tube increased from 9 to 12 mm. When the sloshing angle is constant, the heat transfer coefficient of the spiral-wound heat exchanger decreases with an increase in the winding angle and spacing of the heat exchange tubes, and increases with an increase in the outer diameter of the heat exchange tubes. When the structural parameters of the heat exchanger are constant, the heat transfer coefficient decreases as the sloshing angle increases. When the sloshing angle was less than 3°, the sloshing promoted heat transfer on the shell side. When the sloshing angle was higher than 7°, the heat transfer effect of the shell side deteriorated considerably, which weakened the heat transfer performance of the heat exchanger. When the sloshing period is constant, the heat transfer coefficient of the wound heat exchanger decreases with an increase in the winding angle and spacing of the heat exchange tubes, and increases with an increase in the outer diameter of the heat exchange tubes. When the structural parameters of the heat exchanger are constant, the heat transfer coefficient increases with sloshing period. When the sloshing period was greater than 15 s, the influence of sloshing on the heat transfer on the shell side of the heat exchanger was relatively weak.

Flow Field Simulation of the Spiral-Wound Heat Exchanger

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Turbulent flows in a spiral double-pipe heat exchanger

Numerical simulation of internal flow in forward-curved centrifugal fan

Numerical study on flow and heat transfer performance of a spiral-wound heat exchanger for natural gas

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Numerical Simulations of the Shell-Side Flow Field in Modular Helical-Coiled Heat Exchangers

Experimental Research on Heat Transfer and Flow Resistance Properties in Spiral Twisted Tube Heat Exchanger

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Application and performance of Dean vortices flow with spiral modules on membrane separation

Numerical simulation of heat transfer performance of spiral wound heat exchanger under sloshing condition

Field Synergy Analysis of Six Starts Spiral Corrugated Tube under High Reynolds Number

Experimental and numerical investigation on flow and heat transfer characteristics of a multi-waves internally spiral finned tube

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

Numerical simulation and structure optimization of spiral wound heat exchanger with novel spacing bars

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Research of Heat Transfer Characteristics of Supercritical CO2 in Spiral Tube Heat Exchangers

Fluid-structure interaction analysis of heat exchanger with torsional flow in the shell side

Numerical study on the effect of surface wettability on the falling film flow characteristics of the spiral wound tube heat exchanger