Abstract:Solid-state lithium batteries using solid polymer electrolytes can improve the safety and energy density of batteries. Smoother lithium-ion channels are necessary for solid polymer electrolytes with high ionic conductivity. The porosity and channel structure of the polymer film affect the transfer of lithium ions. However, their controllable synthesis remains a big challenge. Here, we developed a simple synthesis approach toward wrinkled microporous polymer electrolytes by combining the amphoteric (water solubility and organic solubility) polymer in three polymer blends. The homogeneous blend solution spontaneously wrinkled to vertical fold channels as the solvent evaporated. Two minor polymers, poly(vinyl pyrrolidone) (PVP) and polyetherimide (PEI), formed close stacks, and Janus PVP was dispersed in the poly(vinylidene fluoride) (PVDF) matrix. The interfacial tensions between the three polymers were different, so stress was produced when they solidified. The solvent was evaporated to the top layer of the polymers when the temperature increased. The bottom layer wrinkled owing to the stress during solidification. The evaporation of the solvent generated micropores to form the lithium-ion channel. They helped Li+ transference and created a wrinkled microporous PVDF-based polymer electrolyte, which achieved an ionic conductivity of 5.1 × 10–4 S cm–1 and a lithium-ion transference number of 0.51 at room temperature. Meanwhile, the good flame retardancy and tensile strength of the polymer electrolyte film can improve the safety of the battery. At 0.5C and room temperature, the batteries with a LiFePO4 cathode and the wrinkled microporous LiTFSI/PEI/PVP/PVDF electrolyte reached a high discharge specific capacity of 122.1 mAh g–1 at the 100th cycle with a Coulombic efficiency of above 99%. The results of tensile and self-extinguishing tests show that the polymer electrolyte film has good safety application prospects.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11489.Experimental section and characterization. Figure S1: forcite dynamics temperature. Figure S2: forcite dynamics energies. Figure S3: gyration radius of the simulation. Figure S4: number of lithium ions transferred in the LiTFSI/PVP/PVDF polymer electrolyte. Figure S5: electrochemical stability window of the LiTFSI/PVP/PVDF polymer electrolyte. Figure S6: voltage–specific capacity curve of the first cycle of the Li∥LiTFSI/PEI/PVP/PVDF∥LiFePO4 battery. Figure S7: potential–specific capacity curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S8: discharge capacity and efficiency cycle number curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S9: TG curve of polymer electrolyte. Figure S10: DTG curve of polymer electrolyte. Table S1: comparison of the discharge specific capacity of the Lia∥LiTFSI/PEI/PVP/PVDFa∥LiFePO4 battery with the previously reported solid-state polymer electrolyte lithium metal batteries at different temperatures and rate capabilities (PDF)This article has not yet been cited by other publications.

Guiding Uniform Li Deposition through Interfacial Adsorption of Thin Polymer Films on the Anode for High Stability Lithium Metal Batteries

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

In Situ High‐performance Gel Polymer Electrolyte with Dual‐reactive Cross‐linking for Lithium Metal Batteries

Polylatic Acid Nanofiber-Guided Uniform Lithium Deposition for Stable Lithium Metal Anodes

Precise Control of Li+ Directed Transport Via Electronegative Polymer Brushes on Polyolefin Separators for Dendrite‐Free Lithium Deposition

Catalytic anode surface enabling in situ polymerization of gel polymer electrolyte for stable Li metal batteries

A Homogeneous and Mechanically Stable Artificial Diffusion Layer Using Rigid-Flexible Hybrid Polymer for High-Performance Lithium Metal Batteries

Phase-Separation-Induced Porous Lithiophilic Polymer Coating for High-Efficiency Lithium Metal Batteries

Designing F/P Hybrid Polymer As Ultrastable Cationic Shielding Interphase for High-Performance Lithium Metal Batteries

Polymer Electrolyte Film As Robust and Deformable Artificial Protective Layer for High-Performance Lithium Metal Anode.

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes.

Interphase Building of Organic–Inorganic Hybrid Polymer Solid Electrolyte with Uniform Intermolecular Li + Path for Stable Lithium Metal Batteries

First‐Principles Study on Polymer Electrolyte Interface Engineering for Lithium Metal Anodes

A Fluorinated, Ion-Conducting and Adaptive Supramolecular Polymer Protective Layer for Stabilizing Lithium Metal Anodes

Influence of Polymer Interfacial Protective Layer Thickness on the Stability of Lithium‐Metal Batteries

Facile Polymer of Intrinsic Microporosity-Modified Separator with Quite-Low Loading for Enhanced-Performance Lithium Metal Batteries

Inorganic/polymer Hybrid Layer Stabilizing Anode/electrolyte Interfaces in Solid-State Li Metal Batteries

Surface Passivation of Lithium Metal Via in Situ Polymerization

Porous Polymer Membrane with Uniform Lithium-Ion Transport Via Phase Separation for Stable Lithium Metal Batteries

Polymer Zwitterion-Based Artificial Interphase Layers for Stable Lithium Metal Anodes

Improving Fast and Safe Transfer of Lithium Ions in Solid-State Lithium Batteries by Porosity and Channel Structure of Polymer Electrolyte