Tracking of Uncertain Robotic Manipulators Using Event-Triggered Model Predictive Control With Learning Terminal Cost
Erlong Kang,Hong Qiao,Ziyu Chen,Jie Gao
DOI: https://doi.org/10.1109/tase.2022.3152166
IF: 6.636
2022-01-01
IEEE Transactions on Automation Science and Engineering
Abstract:This paper presents an event-triggered model predictive control (MPC) strategy with learning terminal cost for robotic manipulators containing model uncertainty and input constraints. In the proposed MPC structure, an adaptive predictive model for the robotic system is established by radial basis function neural networks (RBFNNs) firstly. Then, a terminal cost adjusted by the global learning mechanism is constructed. Both global steady-state optimization and transient fast convergence are achieved by adding the learning terminal cost to the MPC scheme. After that, a triggering condition of the MPC solving is developed based on the predictive model’s weights and the predictive tracking error. Besides, the condition to avoid Zeno behavior is obtained. The recursive feasibility of the proposed MPC strategy is verified, and the ultimately uniformly boundedness (UUB) of all variables is proved according to the Lyapunov theorem. Finally, experiments based on an xMate7 Pro robot are conducted to demonstrate the effectiveness of the presented method. Note to Practitioners—The tracking control of robotic manipulators is a common and important problem in industrial applications, such as grasping, loading, unloading, et al. There exist some limitations in existing control methods. For example, general control strategies such as adaptive control, sliding mode control neglect the balance between control costs and expected performance; existing optimal control approaches rarely consider global steady-state optimization and transient fast convergence under the influence of model uncertainty. This paper is motivated by these limitations of robotic control design and inspired by model predictive control and optimal control theory. It develops a novel strategy for tracking control of robotic manipulators, which includes three following items: (1) adopt an approximation model constructed by neural networks as the predictive model for estimating the robotic system; (2) introduce a critic network into the terminal cost of the objective function of MPC for learning global optimal solution; (3) establish an event-triggered mechanism for solving of the optimization problem. The proposed method is verified by experimental results. In our future work, the proposed control strategy will be applied to more industrial processes.
automation & control systems