Abstract:Titanium dioxide/carbon nanotubes (TiO2/CNTs) composites were prepared with the aid of ultrasonic irradiation. Products of different TiO2:CNTs molar ratio were characterized by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) adsorption analysis, thermogravimetric and differential thermal analysis (TGA–DSC), photoluminescence (PL) and UV–vis spectroscopy measurements (UV–vis). The photocatalytic activity was evaluated by the degradation of acetone and by the detection of the hydroxyl radical (·OH) signals using electron paramagnetic resonance (EPR). It is found that the crystalline TiO2 is composed of both anatase and brookite phases. The agglomerated morphology and the particle size of TiO2 in the composites change in the presence of CNTs. The CNTs in the composites are virtually all covered by TiO2. Other than an increase of the surface area, the addition of CNTs does not affect the mesoporous nature of the TiO2. Meanwhile, more hydroxyl groups are available on the surface of the composite than in the case of the pure TiO2. The higher the content of CNTs, there is more effective in the suppression of the recombination of photo-generated e−/h+ pairs. However, excessive CNTs also shield the TiO2 from absorbing UV light. The optimal amount of TiO2 and CNTs is in the range of 1:0.1 and 1:0.2 (feedstock molar ratio). These samples have much more highly photocatalytic activity than P25 and TiO2/activated carbon (AC) composite. The mechanism for the enhanced photocatalytic activity of TiO2 by CNTs is proposed.

Photocatalytic Performance of MWCNTs/TiO2 Nanocomposites: Conventional Vs. Microwave-Assisted Synthesis

Preparation of WO<sub>x</sub>-TiO<sub>2</sub> and the Photocatalytic Activity under Visible Irradiation

Enhanced photocatalytic activity of microwave treated TiO2 pillared montmorillonite

Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

Microwave-Assisted Photocatalytic Degradation of Organic Pollutants via CNTs/TiO2

Preparation and Photocatalytic Degradation of CNT/TiO₂ Composites Using MWCNT and Various Titanium Alkoxide Precursors

Synthesis and Characterization of CNT/TiO2 Composites Thermally Derived from MWCNT and Titanium(IV) N-Butoxide

The photocatalytic activity of the TiO2 pillared montmorillonite after microwave treatment

Mechanism, Photocatalytic And Bactericidal Effects For The Nanocarbon/Tio(2) Composites

Fabrication and Performances of MWCNT/TiO 2 Composites Derived from MWCNTs and Titanium (IV) Alkoxide Precursors

Enhancement of Photocatalytic Activity of Mesoporous TiO2 by Using Carbon Nanotubes

Enhanced visible-light photocatalytic activity of BiOI–MWCNT composites synthesised via rapid and facile microwave hydrothermal method

Photocatalytic Properties and the Role of Carbon Nanotubes in Tio2/Carbon Nanotube Composites

Preparation and Photocatalytic Effect of MWCNT/TiO₂ Composites

TiO2 Nanotubes/MWCNTs Nanocomposite Photocatalysts: Synthesis, Characterization and Photocatalytic Hydrogen Evolution under UV-Vis Light Illumination

3D MoS2@TiO2@poly(methyl Methacrylate) Nanocomposite with Enhanced Photocatalytic Activity.

Heterostructure composites of TiO2 and CdZnS nanoparticles decorated on Ti3C2Tx nanosheets and their enhanced photocatalytic performance by microwave hydrothermal method

Preparation of Mwcnt/Tio2 Composites by Using Mwcnts and Titanium(Iv) Alkoxide Precursors in Benzene and Their Photocatalytic Effect and Bactericidal Activity

Hydrothermal synthesis of TiO2/Ti3C2 nanocomposites with enhanced photocatalytic activity

Photocatalytic Decomposition Of Mb Solution By Cnt/Tio(2) Composites Prepared From Mwcnt And Titanium Source

Synthesis and photocatalytic behaviors of Cr 2 O 3 –CNT/TiO 2 composite materials under visible light