Abstract:In this study, the inductor optimization design is performed by applying the Pareto optimization technique. As environmental problems emerge, the electric vehicle market is expanding, and accordingly, volume reduction and high efficiency of the onboard charger (OBC) are required. An OBC consists of a PFC stage and a DC/DC stage. The inductor is a major component in a converter and affects the volume and efficiency of the entire converter system. However, reducing the volume of the inductor leads to an increase in loss due to an increase in the change in flux density. Therefore, it is important to derive a suitable design for the target between the two parameters in the trade-off of loss and volume. This paper introduces the optimal design algorithm for boosting inductors of PFC converters in terms of volume and loss. Volume and loss are difficult to compare with each other, making it difficult to set weights. Therefore, Pareto optimization was applied which can be selected according to the needs and purposes of the decision-maker, without weighting as an optimization method. Through a series of procedures of applying Pareto optimization to the inductor design, several optimal inductor designs can be derived. At this time, the optimal designs become a set of designs in which the loss does not decrease without an increase in volume, or the volume does not decrease without an increase in loss. A designer can select a design with an appropriate volume and loss that meets the purpose of the design or preference. Therefore, through the proposed method, the inductor can be flexibly designed according to the target of the application. The proposed algorithm is applied to the interleaved totem-pole bridgeless boost PFC converter, to review its effectiveness. As a result, several inductor designs are derived in the search space, and various optimal designs are visualized through the Pareto Frontier. This facilitates comparative analysis of various inductor designs and helps designers select reasonable inductors. The validity was verified by selecting one of the obtained optimal inductor designs and driving the experiment with the resulting inductor.

Multi-objective Optimization for Smaller, Efficient and Better Performed Design of Buck-Boost Converters

Multi-objective Design and Optimization of Inductors: A Generalized Software-Driven Approach

Multi-Objective Design of Output LC Filter for Buck Converter Via the Coevolving-AMOSA Algorithm

A Digital Dual-Mode Lqr Optimal Controller for Boost Converter over A Wide Operation Range

Wide-Load Range Multiobjective Efficiency Optimization Produces Closed-Form Control Solutions for Dual Active Bridge Converter

An Optimization Design Method of Front-stage DC/DC Converters for PV System

Pareto-Frontier-Based Multi-Objective Design of Output LC Filter for High Efficiency, High Reliability, and High Power-Density Buck Converter

Study of Bi-Directional Buck-Boost Converter with Different Control Methods

Multi-objective Current Limiters Configuration Based on Parallel Fast and Elitist Non-dominated Sorting Genetic Algorithm-Ⅱ

Design and Analysis of an Optimal Controller for Parallel Multi-Inverter Systems

Modeling and Optimization of a Zero-Voltage Switching Inverter for High Efficiency and Miniaturization

Multi-objective Optimal Configuration of Current Limiting Strategies

Design of LC Filter in Synchronous Buck considering Power Loss and Cost Criterions using Particle Swarm Optimization

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

A Hybrid Multi-Objective Optimization Method and Its Application to Electromagnetic Device Designs

Optimized Design for the Inductor of Shunt Active Power Filter Based on Multi-Objective 4-D Visualization Algorithm

An Improved Tabu-Based Vector Optimal Algorithm for Design Optimizations of Electromagnetic Devices

A practical method for auto-design and optimization of DC-DC buck converter

Development of an Inductor Design Tool Based on Multi-Objective Optimization and Finite Element Simulation

Machine Learning-Based Optimization of Synchronous Rectification Low-Inductance Current Secondary Boost Converter (SLIC-QBC)

A Multi-Objective PFC Boost Inductor Optimal Design Algorithm Based on Pareto Front