Abstract:Understanding the mechanical behavior of soil-structure interaction (SSI) is crucial for the safety and stability of infrastructures. From mesoscale to macroscale, the coupled effects of particle morphology and structural surface roughness on SSI has received little attention. Herein, a series of interface shear tests and simulations were carried out by combining 3D printing and discrete element method (DEM). To quantitatively characterize particle shape and structural surface roughness, modified particle shape parameter Sh and interface morphology factor & lambda; are introduced. The results indicate that increasing the inclination of asperities 1/& lambda; promotes lateral slip displacement of particles and results in significant delamination at the interface. In the vertical shear direction, particle displacement exhibits two patterns: backward falling and maximum displacement at the top of the shear zone, and continuous forward displacement decrease along the height of the specimen. Thus, a new index (i.e., maximum backward falling displacement of particles) is proposed to define the shear zone thickness. Particle shapes and interface roughness have different effects on the particle displacement in the vertical shear direction. An increase in Sh reduces relative displacement, while an increase in 1/& lambda; can increase the magnitude of the relative displacement of particle lateral sliding. The overall strength of particles depends on the coupling effect of particle shapes and interface roughness, both of which have corresponding thresholds. As the interface roughness or Sh increases, three parameters used to describe the contact state of clusters first increase until reaching a turning point and then remain stable or slightly decrease. This paper aims to broaden the understanding of the coupling effects of interfaces with various roughness and particles with different shapes on SSI, with the ultimate goal of contributing to the design of structural interfaces more effective and safety in sandy soil area.

Examination of particle shape on the shear behaviours of granules using 3D printed soil

Particle Shape Effects on the Shear Behaviors of Granular Assemblies: Irregularity and Elongation

The Influence of Particles' Aspect Ratio on the Shear Behaviour of Granular Materials

The Influence of Particle-Size Distribution on Critical State Behavior of Spherical and Non-Spherical Particle Assemblies

Effects of initial fabric anisotropy on mechanical behavior and critical state of granular soil

Rotational Resistance and Shear-Induced Anisotropy in Granular Media

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

The Influence of Particle Elongations on Direct Shear Behaviour of Granular Materials Using DEM

Effects of Particle Morphology on the Shear Response of Granular Soils by Discrete Element Method and 3D Printing Technology

Numerical evaluation of particle shape effect on small strain properties of granular soils

Examination of Interface Roughness and Particle Morphology on Granular Soil–structure Shearing Behavior Using DEM and 3D Printing

Systematic investigation into the role of particle multi-level morphology in determining the shear behavior of granular materials via DEM simulation

Analysis of Particle Shape Characteristics of Lunar Soil Simulant and Its Effect on Shear Strength

Understanding the interplay between particle shape, grading and sample density on the behaviour of granular assemblies: A DEM approach

On the Influence of Inter-Particle Friction and Dilatancy in Granular Materials: a Numerical Analysis

Rheology of Sheared Polyhedral Granular Materials in Inclined Flows

Effect of Particle Shape on Contact Network and Shear-Induced Anisotropy of Granular Assemblies: A DEM Perspective

3D printing-aided numerical study of particle shape effect on behaviours of dry granular flows interacting with rigid barriers

Exploring the effect of particle shape caused by erosion on the shear behaviour of granular materials via the DEM

X-ray CT quantification of in-situ fabric evolution and shearing behaviour of granular soils of different particle shapes

Investigating the effects of elongation and flatness on the shear behaviour of breakable granular materials via the DEM