Abstract:Several heat-to-power conversion technologies are being proposed as suitable for waste-heat recovery (WHR) applications, including thermoelectric generators, hot-air (e.g., Ericsson or Stirling) engines and vapour-cycle engines such as steam or organic Rankine cycle (ORC) power systems. The latter technology has demonstrated the highest efficiencies at small and intermediate scales and low to medium heat-source temperatures and is considered a suitable option for WHR in relevant applications. However, ORC systems experience variations in performance at part-load or off-design conditions, which need to be predicted accurately by empirical or physics-based models if one is to assess accurately the techno-economic potential of such ORC-WHR solutions. This paper presents results from an experimental investigation of the part-load performance of a 1-kWe ORC engine, operated with R245fa as a working fluid, with the aim of producing high-fidelity steady-state and transient data relating to the operational performance of this system. The experimental apparatus is composed of a rotary-vane pump, brazed-plate evaporator and condenser units and a scroll expander magnetically coupled to a generator with an adjustable resistive load. An electric heater is used to provide a hot oil-stream to the evaporator, supplied at three different temperatures in the current study: 100, 120 and 140 ° C. The optimal operating conditions, that is, pump speed and expander load, are determined at various heat-source conditions, thus resulting in a total of 124 steady-state data points used to analyse the part-load performance of the engine. A maximum thermal efficiency of 4.2 ± 0.1% is reported for a heat-source temperature of 120 ° C, while a maximum net power output of 508 ± 2 W is obtained for a heat-source temperature at 140 ° C. For a 100- ° C heat source, a maximum exergy efficiency of 18.7 ± 0.3% is achieved. A detailed exergy analysis allows us to quantify the contribution of each component to the overall exergy destruction. The share of the evaporator, condenser and expander components are all significant for the three heat-source conditions, while the exergy destroyed in the pump is negligible by comparison (below 4%). The data can be used for the development and validation of advanced models capable of steady-state part-load and off-design performance predictions, as well as predictions of the transient/dynamic operation of ORC systems.

Experimental Investigation of 3-Kw Organic Rankine Cycle (ORC) System Subject to Heat Source Conditions: A New Appraisal for Assessment

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Comparison study of Trilateral Rankine Cycle, Organic Flash Cycle and basic Organic Rankine Cycle for low grade heat recovery

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Thermoeconomic Optimization Design of the ORC System Installed on a Light-Duty Vehicle for Waste Heat Recovery from Exhaust Heat

Experimental Investigation of an Organic Rankine Cycle System Using an Oil-Free Scroll Expander for Low Grade Heat Recovery

Towards the Dual Heat Sources Recovery Applied by Organic Rankine Cycle: an Experimental Assessment

HEAT RECOVERY EFFICIENCY ANALYSIS OF WASTE HEAT DRIVEN ORGANIC RANKINE CYCLE

Investigations on Experimental Performance and System Behavior of 10 Kw Organic Rankine Cycle Using Scroll-Type Expander for Low-Grade Heat Source

Energetic and Exergetic Investigation of an Organic Rankine Cycle at Different Heat Source Temperatures

Experimental Study and Numerical Simulation of a Regenerative ORC Utilizing Low-Grade Heat Source

Experimental Investigations into Power Generation with Low Grade Waste Heat and R245fa Organic Rankine Cycles (Orcs)

Effect of heat source supplies on system behaviors of ORCs with different capacities: An experimental comparison between the 3 kW and 10 kW unit

Experimental Study of the Organic Rankine Cycle under Different Heat and Cooling Conditions

Effect Factors of Part-Load Performance for Various Organic Rankine Cycles Using in Engine Waste Heat Recovery

Operational Optimisation of a Non-Recuperative 1-Kwe Organic Rankine Cycle Engine Prototype

Organic Rankine cycle performance evaluation and thermoeconomic assessment with various applications part I: Energy and exergy performance evaluation

Experimental Comparison of the Performance of Basic and Regenerative Organic Rankine Cycles

Thermal dynamics analysis on the organic Rankine cycle (ORC) with internal heat regenerator at superheated and subcooling conditions

Experimental Investigation of a Small-Scale Organic Rankine Cycle under Off-Design Conditions: from the Perspective of Data Fluctuation