Abstract:This article presents a co-design method of dynamic periodic event-triggering mechanism (DPETM) and output-based control law for networked control systems (NCSs) subject to inevitable imperfections such as limited network resources, exogenous disturbances and successive packet dropouts. The developed DPETM has the potential to make full use of scarce network resources compared to the periodic sampled-data control on the one hand, and is natural for practical digital platforms instead of a discretized version of continuous event-triggered control (CETC) one the other hand. In this paper, the whole closed-loop system is modeled a unified hybrid system by incorporating bilateral DPETM, successive packet dropouts effects and external disturbances, and an improved hybrid Lyapunov function is constructed for stability analysis. Based on the hybrid framework, some sufficient conditions are presented to guarantee $mathcal{L}_2$ -stability of the system while tolerating a maximum allowable number of successive packet dropouts (MANSD). Furthermore, new linear matrix inequality (LMI) conditions for co-design of control law and triggering strategy are derived by introducing some constraints with the free variables and a modified Young’s inequality. In addition, this paper considers two scenarios relating to whether an acknowledgment scheme is employed or not. Finally, the effectiveness of the proposed method is verified by two illustrated examples and comparative studies. Note to Practitioners—With the increasing requirement for reducing unnecessary waste of communication resources in modern industries, it is necessary to consider an alternative paradigm of the time-triggered control. In many digital control applications such as smart power grid, vehicle and remote surgery, the control tasks are often executed periodically, which makes it difficult for the theoretical results of CETC to be directly applied to practical digital platforms. The DPETM proposed in this paper, which only verifies the triggering conditions periodically at each sampling instant, is more suitable for practical digital platforms such as time-sliced embedded architectures compared to CETC. This paper investigates the stability problem for NCSs with DPETM subject to packet dropouts. Different from most of the existing literature on randomness of packet loss, this paper focuses on impact of the continuity of packet dropouts on system performance. Based on the hybrid framework and the Lyapunov approach, a co-design methodology of triggering condition and control law is proposed to ensure that the system satisfies the desired performance and can admit a MANSD.

Predictive Event-Triggered Control for Disturbanced Wireless Networked Control Systems

Distributed Model Predictive Control Algorithm Based on Event-Trigger

Modelling and Control of Zigbee-based Wireless Networked Control System with Both Network-Induced Delay and Packet Dropout

Stabilization of Wireless Networked Control System with Multi-Packet Transmission Policy

Event-Triggered Predictive Control for Networked Systems Based on a Dual-Rate Sampling Switched Observer

Disturbance Prediction-Based Adaptive Event-Triggered Model Predictive Control for Perturbed Nonlinear Systems

Event-Triggered Control for Networked Predictive Control Systems with Time Delay and External Disturbance

Dynamic Triggering Mechanisms for Distributed Adaptive Synchronization Control and Its Application to Circuit Systems

Guaranteed cost fault-tolerant control for uncertain networked control system with packet dropouts

Data-Based Predictive Control for Networked Nonlinear Systems with Network-Induced Delay and Packet Dropout

Predictive Control of Network Control Systems with Unknown Transmission Delay Via LSTM Network

Event-triggered Model-free Adaptive Control of Networked Nonlinear Systems with Packet Dropouts Compensation

Data-based Predictive Control for Networked Non-Linear Systems with Two-Channel Packet Dropouts

Dynamic event‐triggered model‐free adaptive control for networked control systems with random packet loss

Finite-Time Dissipative Control For Networked Control Systems With Hybrid-Triggered Scheme

Predictive Observer‐based Control for Networked Control Systems with Network‐induced Delay and Packet Dropout

Fault Detection of Networked Control Systems with Packet Dropout

Event-triggered network congestion control of TCP/AWM systems

Integrated Channel-Aware Scheduling and Packet-Based Predictive Control for Wireless Cloud Control Systems

Dynamic Periodic Event-Triggered Control for Networked Control Systems Under Packet Dropouts

Residual generation and evaluation of networked control systems subject to random packet dropout