Abstract:A novel hybrid fuel cell (F-HFC) was fabricated. ● Pollutant degradation and synchronous electricity generation occurred in F-HFC. ● BiOCl-NH4PTA photocatalyst greatly improved electron transfer and charge separation. ● Pollutant could act as substrate directly in ambient conditions without pretreatment. ● The mechanism of the F-HFC was proposed and elucidated. The development of highly efficient energy conversion technologies to extract energy from wastewater is urgently needed, especially in facing of increasing energy and environment burdens. Here, we successfully fabricated a novel hybrid fuel cell with BiOCl-NH4PTA as photocatalyst. The polyoxometalate (NH4PTA) act as the acceptor of photoelectrons and could retard the recombination of photogenerated electrons and holes, which lead to superior photocatalytic degradation. By utilizing BiOCl-NH4PTA as photocatalysts and Pt/C air-cathode, we successfully constructed an electron and mass transfer enhanced photocatalytic hybrid fuel cell with flow-through field (F-HFC). In this novel fuel cell, dyes and biomass could be directly degraded and stable power output could be obtained. About 87 % of dyes could be degraded in 30 min irradiation and nearly 100 % removed within 90 min. The current density could reach up to ~267.1 μA/cm2; with maximum power density (Pmax) of ~16.2 μW/cm2 with Rhodamine B as organic pollutant in F-HFC. The power densities were 9.0 μW/cm2, 12.2 μW/cm2, and 13.9 μW/cm2 when using methyl orange (MO), glucose and starch as substrates, respectively. This hybrid fuel cell with BiOCl-NH4PTA composite fulfills the purpose of decontamination of aqueous organic pollutants and synchronous electricity generation. Moreover, the novel design cell with separated photodegradation unit and the electricity generation unit could bring potential practical application in water purification and energy recovery from wastewater.

Passively Improving Liquid Sorbent Based Atmospheric Water Generation by Integration of Fuel Cell Waste Products

Fuel Synthesis with Co2 Captured from Atmosphere: Thermodynamic Analysis

An Interfacial Solar-Driven Atmospheric Water Generator Based on a Liquid Sorbent with Simultaneous Adsorption-Desorption

An Interfacial Solar Heating Assisted Liquid Sorbent Atmospheric Water Generator.

Innovative use of air gap membrane distillation to harvest waste heat from alkaline fuel cell for efficient freshwater production: A comprehensive 4E study

Analysis and multi-objective optimization of integrating a syngas-fed solid oxide fuel cell improved by a two-stage expander-organic flash cycle using an ejector and a desalination cycle

Design and multi-objective optimization of low-temperature proton exchange membrane fuel cells with efficient water recovery and high electrochemical performance

Integration of high-temperature PEMFC with air gap membrane distillation for simultaneous electricity generation and seawater desalination: A theoretical investigation

Improving atmospheric water production yield: Enabling multiple water harvesting cycles with nano sorbent

Comprehensive optimization of an integrated energy system for power, hydrogen, and freshwater generation using high-temperature PEM fuel cell

A Spontaneous and Passive Waste-Management Device (PWMD) for a Micro Direct Methanol Fuel Cell

Use of an Intermediate Solid-State Electrode to Enable Efficient Hydrogen Production from Dilute Organic Matter

A multi-function desalination system based on hydrolysis reaction of hydride and fuel cell water recovery

A Hybrid Fuel Cell for Water Purification and Simultaneously Electricity Generation

A nature-inspired solution for water management in flow fields for electrochemical devices

Energy, Exergy, and Exergoeconomic Analysis of Solar-Driven Solid Oxide Electrolyzer System Integrated with Waste Heat Recovery for Syngas Production

A Scalable and Robust Water Management Strategy for PEMFCs: Operando Electrothermal Mapping and Neutron Imaging Study

Self-humidifying effect of air self-circulation system for proton exchange membrane fuel cell engines

Direct Air-Water Capture and Hydrogen Generation via Flowing Hygroscopic Solvents

Photothermal Synergistic Hydrogen Production via a Fly‐Ash‐made Interfacial Vaporific System

Recent advances in heat and water management of forced-convection open-cathode proton exchange membrane fuel cells