Abstract:Near-field high-resolution synthetic aperture radar (SAR) imaging is mostly accompanied by a large number of data acquisition processes, which increases the system complexity and device cost. According to extensive reports, reducing the number of sampling points of a radar in space can greatly reduce the amount of data. However, when spatial sparse sampling is carried out, a ghost normally appears in the imaging results due to the high side lobes generated in the azimuth. To address this issue, a technique is introduced in this paper to recover the blank data through amplitude and phase compensation based on the correlation between sparse array sampling through adjacent points. Firstly, the data sampled by the sparse array is compressed in the range direction to obtain the expected data slices in the same range direction. Then, the blank element of the slice is compensated for with amplitude and phase to obtain full aperture data. Finally, the matched filter method is used to aid in the image reconstruction. The simulation results verified that the method proposed in this paper can effectively reconstruct the image under two kinds of sparse sampling conditions. Thus, a simple single-input single-output (SISO) synthetic aperture radar imaging test bench is established. Compared with the results of a 1 mm (1/4 λ) sampling interval, the quality of the reconstructed image under the condition of a 4 mm (1 λ) sampling interval still stands using our proposed method. Demonstrated by the experiment, the normalized root-mean-square error(NMSE) is 5.75%. Additionally, when the spatial sampling points are sampled randomly with 30% of the full sampling condition, this method can also restore and reconstruct the image with high quality. Due to the decrease of sampling points, the data volume can be reduced, which is beneficial for improving the scanning speed and alleviating the pressure of data transmission for near-field high resolution SAR imaging systems.

A NEW PASSIVE CODING IMAGING METHOD IN SYNTHETIC APERTURE INTERFEROMETRIC RADIOMETER

A New SAR Imaging Method for Sparse Field Traget

Beam Scanning Design and Performance Analysis for Near-Field IRS-Aided Integrated Sensing and Communication Systems

Application of Stimulated Brillouin Scattering in Synthetic Aperture Passive Millimeter Wave Imaging

A Near-Field Imaging Algorithm Based on Angular Spectrum Theory for Synthetic Aperture Interferometric Radiometer

Adaptive load balancing parallel signal-level simulation for synthetic aperture radiometer

An Active Millimeter-Wave Imager Based on MIMO-SAR Scheme

Passive Distributed Aperture Radar Imaging Method Based on Unknown Waveform Modeling

A Millimeter-Wave 3D Imaging Algorithm for MIMO Synthetic Aperture Radar

Simulation Of A Modified Algorithm For Sar Parallel Imaging

Active Reconfigurable Intelligent Surface Empowered Synthetic Aperture Radar Imaging

Passive Reflection Codebook Design for IRS-Integrated Access Point

Large-aperture computational single-sensor microwave imager using 1-bit programmable coding metasurface at single frequency

Iterative Regularization Using an Acceleration Technique for Synthetic Aperture Interferometric Radiometer

An Efficient Radio Frequency Interference Mitigation Algorithm in Real Synthetic Aperture Radar Data

3D Imaging Method Based on Digital Coding Metasurface With Unknown Mutual Coupling

Near-Field High-Resolution SAR Imaging with Sparse Sampling Interval

A Novel ISAR Image Feature Suppression Method Based on Arbitrary Phase Encoding

Coded Aperture Radar Imaging Using Reconfigurable Intelligent Surfaces

Analysis of Static Coded Aperture Imaging Spectrometer

A Novel Distance Estimation Method for Near-Field Synthetic Aperture Interferometric Radiometer