Abstract:Demolished concrete, as one main form of construction and demolition wastes, has been widely studied of being utilized as recycled aggregates (RAs) in new concrete production. However, existing studies of applying RAs have been limited to the mechanical and durability issues of cementitious composites containing RAs. There has not been sufficient research of adopting RAs in cementitious products to also address the environmental sustainability. On the other hand, existing research utilizing cementitious products (e.g., concrete pavement) for air purification purpose have not adequately considered RA usage. Aiming to address the two sustainable objectives (i.e., waste diversion and air purification) simultaneously in concrete mix, this research adopted a two-step approach. Firstly, we studied and identified the optimal mix design of pervious concrete containing TiO2-soaked recycled coarse aggregates (RCAs) in order to achieve the higher compressive strength; secondly, we investigated the photocatalytic performance of pervious concrete containing RCAs coated with TiO2 photocatalysts. The photocatalytic performance of pervious concrete was also tested by applying a 10-min heavy rainwater wash. Experimental test results revealed that the internal voids of adhered mortar enabled RCAs to absorb more TiO2 particles. The NO degradation rate of TiO2-soaked RCAs increased from 71.4% to 80.6% when RCAs' size decreased from 15-20 mm to 5-10 mm. The orthogonal experimental investigation indicated that water-to-binder ratio had the most significant effect on concrete compressive strength, followed by ratio of RCAs to binder, and replacement ratio of RCAs to natural aggregates. The optimized mix design for pervious concrete containing RCAs was identified to achieve highest strength (i.e., water-to-binder ratio at 0.35, coarse aggregate-to-binder ratio of 3 by mass, fly ash replacement rate to Portland cement at 5%, and 50% replacement ratio of RCAs to NCAs). The concentration of TiO2 solution at 0.3% was identified as the optimal ratio to achieve the highest NO degradation rate at 70% before rainwater wash. The NO degradation rates of pervious concrete still reached nearly 50% after 10-min heavy rainwater wash, indicating that pervious concrete using RCAs coated with TiO2 could largely maintain its photocatalytic capacity. This study addresses two main social and environmental issues in developing countries (e.g., China), namely overwhelming amount of construction & demolition wastes being generated, and air pollution. It leads to the cleaner production in concrete pavement construction by achieving the optimization between waste reuse, air purification, and engineering properties of porous concrete. (c) 2019 Elsevier Ltd. All rights reserved.

Analysis of Properties of Pervious Concrete Prepared with Difference Paste-Coated Recycled Aggregate

Strength Enhancement of Recycled Aggregate Pervious Concrete Using a Cement Paste Redistribution Method

Properties of Recycled Aggregate Concrete with Different Water Control Methods

Rheological and early hydration of cementitious material containing recycled concrete powders collected from recycled aggregates

Effects of Mixture Proportions and Molding Method on the Performance of Pervious Recycled Aggregate Concrete

Compressive Strength, Permeability, and Abrasion Resistance of Pervious Concrete Incorporating Recycled Aggregate

Experimental study on pervious concrete

Research on the purification efficiency and mechanism for road runoff pollutants in pervious concrete with recycled aggregates

Maximum Paste Coating Thickness Without Voids Clogging of Pervious Concrete and Its Relationship to the Rheological Properties of Cement Paste

Feasibility study of RAP aggregates in cement concrete pavements

Feasibility Study of Pervious Concrete with Ceramsite as Aggregate Considering Mechanical Properties, Permeability, and Durability

Studying the Mix Design and Investigating the Photocatalytic Performance of Pervious Concrete Containing TiO2-Soaked Recycled Aggregates

An evaluation of the recycled aggregate characteristics and the recycled aggregate concrete mechanical properties

Research on the strength prediction for pervious concrete based on design porosity and water-to-cement ratio

Study on Key Properties and Model Establishment of Innovative Recycled Aggregate Pervious Concrete

Mechanical Properties of Pervious Recycled Aggregate Concrete Reinforced with Sackcloth Fibers (SF)

Effect of Recycled Aggregates on Previous Concrete Properties

Effects of CO2 Curing on the Properties of Pervious Concrete in Different Paste–Aggregate Ratios

Mixture proportion design of pervious concrete based on the relationships between fundamental properties and skeleton structures

Conceptual design and performance evaluation of high strength pervious concrete

Hydraulic and strength characteristics of pervious concrete containing a high volume of construction and demolition waste as aggregates