Abstract:We present results for a one-dimensional quasi-steady-state thermodynamic model developed for a 111.7 MW e concentrating solar power (CSP) system using a redox-active metal oxide as the heat storage media and heat transfer agent integrated with a combined cycle air Brayton power block. In the energy charging and discharging processes, the metal oxide CaAl 0.2 Mn 0.8 O 2.9-δ (CAM28) undergoes a reversible, high temperature redox cycle including an endothermic oxygen-releasing reaction and exothermic oxygen-incorporation reaction. Concentrated solar radiation heats the redox-active oxide particles under partial vacuum to drive the reduction extent deeper for increased energy density at a fixed temperature, thereby increasing storage capacity while limiting the required on sun temperature. Direct counter-current contact of the reduced particles with compressed air from the Brayton compressor releases stored chemical and sensible energy, heating the air to 1,200°C at the turbine inlet while cooling and reoxidizing the particles. The cool oxidized particles recirculate through the solar receiver subsystem for another cycle of heating and reduction (oxygen release). We applied the techno-economic model to 1) size components, 2) examine intraday operation with varying solar insolation, 3) estimate annual performance characteristics over a simulated year, 4) estimate the levelized cost of electricity (LCOE), and 5) perform sensitivity analyses to evaluate factors that affect performance and cost. Simulations use hourly solar radiation data from Barstow, California to assess the performance of a 111.7 MW e system with solar multiples (SMs) varying from 1.2 to 2.4 and storage capacities of 6–14 h. The baseline system with 6 h storage and SM of 1.8 has a capacity factor of 54.2%, an increase from 32.3% capacity factor with no storage, and an average annual energy efficiency of 20.6%. Calculations show a system with an output of 710 GWh e net electricity per year, 12 h storage, and SM of 2.4 to have an installed cost of $329 million, and an LCOE of 5.98 ¢/kWh e . This value meets the U.S. Department of Energy’s SunShot 2020 target of 6.0 ¢/kWh e ( U. S Department of Energy, 2012 ), but falls just shy of the 5.0 ¢/kWh e 2030 CSP target for dispatchable electricity ( U. S Department of Energy, 2017 ). The cost and performance results are minimally sensitive to most design parameters. However, a one-point change in the weighted annual cost of capital from 8 to 7% (better understood as a 12.5% change) translates directly to an 11% decrease (0.66 ¢/kWhe) in the LCOE.

Technoeconomic Impacts of Storage System Design on the Viability of Concentrated Solar Power Plants

Small-scale concentrated solar power system with thermal energy storage: System-level modelling and techno-economic optimisation

Techno-Economic Evaluation of Future Thermionic Generators for Small-Scale Concentrated Solar Power Systems

Techno-economic evaluation of energy storage systems for concentrated solar power plants using the Monte Carlo method

Fuzzy Logic Energy Management Strategy of a Multiple Latent Heat Thermal Storage in a Small-Scale Concentrated Solar Power Plant

Economic Feasibility of Thermal Energy Storage-Integrated Concentrating Solar Power Plants

Technical and economic assessment of thermal energy storage in concentrated solar power plants within a spot electricity market

Techno-economic feasibility of solar power plants considering PV/CSP with electrical/thermal energy storage system

Techno-Economic Analysis of a Concentrating Solar Power Plant Using Redox-Active Metal Oxides as Heat Transfer Fluid and Storage Media

Assessing the performance of novel molten salt mixtures on CSP applications

Study on the dynamic characteristics of a concentrated solar power plant with the supercritical CO2 Brayton cycle coupled with different thermal energy storage methods

Indirect integration of thermochemical energy storage with the recompression supercritical CO2 Brayton cycle

Economic Analysis and Life Cycle Assessment of Concrete Thermal Energy Storage for Parabolic Trough Power Plants

Load Matching and Techno-Economic Analysis of CSP Plant with S–CO2 Brayton Cycle in CSP-PV-wind Hybrid System

Techno–Economic Analysis of the Optimum Configuration for Supercritical Carbon Dioxide Cycles in Concentrating Solar Power Systems

Mapping the techno-economic potential of next-generation CSP plants running on transcritical CO 2 -based power cycles

Optimisation of Solar Aided Power Generation plant with storage system adopting two non-displaced extraction steam operation strategies

Economic implications of thermal energy storage for concentrated solar thermal power

Multi-objective optimisation of a thermocline thermal energy storage integrated in a concentrated solar power plant

Machine learning discovery of cost-efficient dry cooler designs for concentrated solar power plants

Cost performance of encapsulated phase change material-based thermal energy storage systems