Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

Influence of Segregation on the Permeability of Self-Consolidating Concrete

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Correlating Aggregate Properties and Concrete Rheology to Dynamic Segregation of Self-Consolidating Concrete

Properties of Recycled Aggregate Concrete with Different Water Control Methods

Effects of Aggregate Properties and Concrete Rheology on Stability Robustness of Self-Consolidating Concrete

Characterization of Fresh Scc Properties with Electrical Resistivity

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Measuring Static Stability and Robustness of Self-Consolidating Concrete Using Modified Segregation Probe

Effect of Variations in Aggregate Ratios on the Fresh, Hardened, and Durability Properties of Self-Compacting Concrete

Influence of the porosity and pore size on the compressive and splitting strengths of cellular concrete with millimeter-size pores

Effect of Fine Aggregate Characteristics on the Thresholds of Self-Compacting Paste Rheological Properties

Mixing uniformity effect on hydraulic conductivity of cement-based stabilized soft clay

Tomographic analysis of segregation behavior of hollow glass microspheres in lightweight cementitious composites

Influences of aggregate gradation on alkali-silica reaction of seawater and sea sand concrete

Impermeability and Durability of Self-Compacting Concrete Prepared with Aeolian Sand and Recycled Coarse Aggregate

Performance and Uniformity of Self-Compacting Concrete

Influence of the Fine Aggregate Particle Packing Effects on the Paste Rheological Thresholds of Self-Compacting Concrete

Effects of Water-to-Cement Ratio on Pore Structure Evolution and Strength Development of Cement Slurry Based on HYMOSTRUC3D and Micro-CT

Advanced Moisture Control in Porous Aggregates for Improved Lightweight High-Performance Concrete

Influence of Mixture Proportions on Fresh and Mechanical Properties of Self-consolidating Concrete