Abstract:This paper presents a new spiral smoothing method to generate smooth curved tool paths directly on mesh surfaces. Spiral tool paths are preferable for computer numerical control (CNC) milling, especially for high-speed machining. At present, most spiral tool path generation methods aim mainly for pocketing, and a few methods for machining complex surface also suffer from some inherent problems, such as selection of projecting direction, preprocessing of complex offset contours, easily affected by the mesh or mesh deformation. To address the limitations, a new spiral tool path method is proposed, in which the radial curves play a key role as the guiding curves for spiral tool path generation. The radial curve is defined as one on the mesh surface that connects smoothly one point on the mesh surface and its boundary. To reduce the complexity of constructing the radial curves directly on the mesh surface, the mesh surface is first mapped onto a circular region. In this region, the radial lines, starting from the center, are planned and then mapped inversely onto the mesh surface, thereby forming the desired radial curves. By traversing these radial curves using the proposed linear interpolation method, a polyline spiral is generated, and then, the unfavorable overcuts and undercuts are identified and eliminated by supplementing additional spiral points. Spline-based technique of rounding the corners is also discussed to smooth the polyline spiral, thereby obtaining a smooth continuous spiral tool path. This method is able to not only greatly simplify the construction of radial curves and spiral tool path but also to have the ability of processing and smoothing complex surfaces. Experimental results are presented to validate the proposed method.

Spiral tool path generation method in a NURBS parameter space for the ultra-precision diamond turning of freeform surfaces

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

A Toolpath Planning Method for Optical Freeform Surface Ultra-Precision Turning Based on NURBS Surface Curvature

Spiral tool path optimization method for fast/slow tool servo-assisted diamond turning of freeform surfaces with highly form accuracy

Spiral Tool Path Generation Method on Mesh Surfaces Guided by Radial Curves

Accurate Spiral Tool Path Generation of Ultraprecision Three-Axis Turning for Non-Zero Rake Angle Using Symbolic Computation

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

A Method of Generating Spiral Tool Path for Direct Three-Axis Computer Numerical Control Machining of Measured Cloud of Point

An Optimal Method of Tool Path Generation for Radial Sinusoidal Surface

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

An Adaptive Constant Scallop-height Tool-Path Planning Method For Turn-Milling Machining of NURBS free-form surfaces

Combined Reparameterization-Based Spiral Toolpath Generation for Five-Axis Sculptured Surface Machining

Theoretical Analysis about Off-Axis Parabolic Surface Machining under Two Different Accurate Spiral Tool Paths

Optimization of Tool Path for Uniform Scallop-Height in Ultra-precision Grinding of Free-form Surfaces

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Generating Spiral Tool Path to Machine Free-Form Surface with Complex Topology Based on Fusing Constraint Mapping and Enriched Voronoi Diagram

Combining Physical Shell Mapping And Reverse-Compensation Optimisation For Spiral Machining Of Free-Form Surfaces

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Isoparametric and Spiral Toolpath for Free-form Surfaces Machining

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver