Abstract:Poor long-term cycling stability and rate capability seriously restricted the commercial applications of silicon (Si) anodes, because of the huge volume change and the kinetic problems linked to the electronic conductivity and solid-state diffusion of Li+. To overcome these challenges, herein, heteroatom phosphorus (P), as the dopant, is successfully incorporated with silicon to form coral-like P-doped Si anode in lithium-ion batteries. Such the coral-like P-doped Si anode exhibits a noticeable specific capacity (2460.4 mA h g–1 at 0.2 A g–1), excellent rate capability (911 mA h g–1 at 16 A g–1), and long cycling stability (1564 mA h g–1 after 100 cycles at 2 A g–1), which are attributed to three factors: (1) the three-dimensional interconnected nanopores of the coral-like P-doped Si could accommodate volume expansion during cycling; (2) P doping improves the electron-donating ability and suppresses the polarization effect; (3) low activation energies and high Li+ diffusion coefficient are mapped and calculated from the nano- to micrometer and macroscales, verifying that the high Li+ diffusion facilitates the redox kinetics of Si species.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.0c00534.Scheme S1, two possible reaction pathways for the formation of generation of P–(O–Si)n bonds; Figure S1, SEM images of (a) pure SiO2, (b) HRTEM image of P0.125Si, (c) TEM images of pure Si; Table S1, atom contents of P0.063Si, P0.125Si, and P0.188Si samples from XPS measurements (at. %); Table S2, fitting parameters for XPS Si 2p core-level spectra of P0.063Si, P0.125Si, and P0.188Si samples: binding energy and corresponding normalized intensity; Figure S2 N2 adsorption/desorption isotherms and corresponding pore size distribution curves; Figure S3, the equivalent circuit for fitting the impedance spectra of pure Si, P0.063Si, P0.125Si, and P0.188Si electrodes; Table S4, simulation results of the kinetic parameters of Si, P0.063Si, P0.125Si, and P0.188Si electrodes before and after 10 cycles; preparation of the electrodes for ESM testing; electrochemical performance of Si and different kinds of P-doped Si (PDF)This article has not yet been cited by other publications.

High power and stable P-doped yolk-shell structured Si@C anode simultaneously enhancing conductivity and Li + diffusion kinetics

Novel Si@C/P anode materials with improved cyclability and rate capacity for lithium-ion batteries

Design of phosphorus-doped porous hard carbon/Si anode with enhanced Li-ion kinetics for high-energy and high-power Li-ion batteries

Effect of Phosphorus Doping on Conductivity, Diffusion, and High Rate Capability in Silicon Anode for Lithium-Ion Batteries

Boosting the anode performance of the porous Si coated with polydopamine and cross-linked with sodium alginate

A Stable Core–Shell Si@SiOx/C Anode Produced via the Spray and Pyrolysis Method for Lithium-Ion Batteries

The robust carbon shell to improve stability of porous Si anodes for high-performance lithium-ion batteries

Phosphorus-doped silicon copper alloy composites as high-performance anode materials for lithium-ion batteries

Porous Si@C ball-in-ball hollow spheres for lithium-ion capacitors with improved energy and power densities

The facile preparation and performances of prelithiated silicon oxide anode materials

CNTs-intertwined and N-doped porous carbon wrapped silicon anode for high performance lithium-ion batteries

Facile preparation of nitrogen-doped yolk-shell Si@void@C/CNTs microspheres as high-performance anode in lithium-ion batteries

In Situ Growth of Silicon Carbide Interface Enhances the Long Life and High Power of the Mulberry-Like Si-based Anode for Lithium-Ion Batteries

Carbon-Coated Si Nanosheets as Anode Materials for High-Performance Lithium-Ion Batteries

Low-cost heterogeneous dual-carbon shells coated silicon monoxide porous composites as anodes for high-performance lithium-ion batteries.

An Anode Material for Lithium Storage: Si@N,S-Doped Carbon Synthesized via In Situ Self-Polymerization

Engineering Nano-Sized Silicon Anodes with Conductive Networks Toward a High Average Coulombic Efficiency of 90.2% Via Plasma-Assisted Milling

Multilayer boron doped Si@SiOx/C from Si-Ca alloy for lithium-ion battery anodes

Preparation and properties of porous silicon anode coated with nitrogen-doped carbon for lithium-ion battery

Boron-doped porous Si anode materials with high initial coulombic efficiency and long cycling stability

High Performance Nitrogen-Doped Si/C as the Anode Material of Lithium-Ion Batteries