Abstract:To protect power systems from severe short circuit faults, the zero-current switching (ZCS) technique is widely accepted due to its fast interruption speed. However, the traditional ZCS technique is more complicated in bidirectional switching, which limits its wide application, especially in AC power systems. Therefore, a novel auto-oriented bidirectional ZCS hybrid circuit breaker is proposed to simplify the overall topology of the circuit breaker. The design of the ZCS hybrid circuit breaker is based on the idea of diverting the pulse current toward the reverse direction of the fault current by the arcing voltage itself. The proposed scheme can interrupt bidirectional faults with just one ZCS circuit, without detecting fault current direction. Firstly in the paper, the topology and operating principles of the proposed bidirectional ZCS hybrid circuit breaker are introduced. Moreover, the key parameters are optimized to make the hybrid circuit breaker capable of bidirectional interruption automatically. Furthermore, dielectric recovery characteristics of the vacuum interrupter under special conditions are also measured to determine the design parameters. The proposed topology of the bidirectional ZCS hybrid circuit breaker is validated using a 450VAC/630A prototype. Short circuit breaking tests of the prototype are conducted without detecting fault current direction in advance. Experimental results show that the breaking time of the prototype is less than 1 ms in clearing either direction of fault current with a prospective value of 20 kA and $\text{d}i/\text{d}t$ of 8 A/ $\mu \text{s}$ . The feasibility of the proposed scheme is verified with these test results.

Fading Kalman Filter-based Method for Controlled Fault Interruption

Fuzzy-Kalman-Filter-Based Short-Circuit Fault Diagnosis Design for Lithium-Ion Battery

A Fast Current Zeroes Estimation Algorithm for Controlled Fault Interruption Based on an Improved BP Neural Network

Online Real-Time Calculation of Short-Circuit Current Based on Improved Gradient Estimation Algorithm

Design and Implementation of an Auto-Oriented Bidirectional ZCS Hybrid Circuit Breaker

Study On Fast Early Detecting And Rapid Accurate Fault Parameters Estimation Method For Short-Circuit Fault

An Innovative Arc Fault Model and Detection Method for Circuit Breakers in LCC-HVDC AC Filter Banks

A Novel Machine Learning-Based Short-Circuit Current Prediction Method for Active Distribution Networks

A Fast Fault Detection Method for Controlled Fault Interruption Based on Wavelet Singularities and BP Neural Network

Improved Finite Set Model Predictive Current Control of Grid Side Converter in Weak Grid Using Kalman Filter

Control strategy and experimental verification of hybrid DC circuit breaker

A Fault Current Limiting Control Scheme for Sectionalized Connection Mode Based on Dynamic Topology Adjustment

Flexible Fault Current Adaptation Features of A Novel DC Circuit Breaker Assisted by Superconducting Fault Current Limiters

Ddl Algorithm Based Short Circuit Current Detection In Dc Circuit Breaker

Identification of Low Voltage AC Series Arc Faults by using Kalman Filtering Algorithm

Time Series Prediction of Short Circuit Current for Synchronous Control of Synthetic Test Based on Delay Coordinate Embedding

Control Development and Fault Current Commutation Test for the EDISON Hybrid Circuit Breaker

Fast Identification of Short Circuit Fault Based on Average Curvature of Current Waveform

Fault Estimation and Tolerant Anti‐Disturbance Switching Control for Switched Systems With Its Application to Circuit Systems

Improved Hybrid HVDC Circuit Breaker with Power Flow Control Capability for HVDC Grids

Investigation on the DC CB Performance During a Current Interruption Failure at First Current Zero