Abstract:The application of a robot manipulator to the task of parts assembling or collaboration with human workers requires compliant control and intrinsic safety. As a result, it is necessary to exert accurate torque on each joint of the robot through torque sensing and implementing closed-loop joint torque control. This torque servo system is required to track reference torque signals while operating under the influence of motor friction, flexibility of the harmonic drive, noise from the sensor, robot dynamics modelling error and other unknown certainties, resulting in large control efforts. This paper focuses on providing better compliance control for collaborative robots and proposes a joint torque controller design under development with active disturbance rejection concept. The controller is designed through a novel extended state observer to estimate and compensate for the unmodelled dynamics of the system, nonlinearly variable motor friction, and other uncertainties. Then, a simple proportional differential controller is designed to produce control law. In spite of the remarkable performance in dealing with the mechanical dynamics of the joint actuator, the original controller does not work well with the electrical factor of the joint actuator due to the limited current loop bandwidth in the hardware of motor and driver. To eliminate the detrimental effect of the time delay in current servo, a predictive output method based on a nonlinear tracking differentiator (TD) is used to improve the controller within the framework of active disturbance rejection control. Both simulations and experiments are conducted on a prototype one degree of freedom manipulator with a joint torque sensor. The results demonstrate the enhancement of both the system stability and disturbance rejection performances. Based on the proper treatment of actuator delay, the dominant effect of the motor friction and the flexibility of the harmonic drive has been reduced to insignificance. Moreover, the proposed controller is easy to implement because the explicit dynamic model of the system is not required.

Disturbance Elimination for the Modular Joint Torque Sensor of a Collaborative Robot

Design and Optimization of a Joint Torque Sensor for Robot Collision Detection

Design of Strain Gauge Torque Sensor Used in the Modular Joint of Collaborative Robot

Joint Torque Control of a Collaborative Robot Based on Active Disturbance Rejection with the Consideration of Actuator Delay

Design of Highly Sensitive Joint Torque Sensor for Collision Detection in Robotic Manipulators

Design and Calibration of a Joint Torque Sensor for Robot Compliance Control

Integrated Torque Sensors for Humanoid Robot Joints

Vibration Suppression for the Flexible Joint with Torque Sensor

Calibration Platform for Modularized Robot Arm Joint Torque Sensor

Impedance Control of Collaborative Robots Based on Joint Torque Servo with Active Disturbance Rejection.

Design, optimization, and crosstalk analysis for robot joint torque sensor of shear beam structure.

Torque Estimation for Robotic Joint with Harmonic Reducer Based on Deformation Calibration

Development of Joint Torque Sensor on Space Manipulator

Research of Torque Sensor for Robot Variable Stiffness Joint on Strain Gauge Array

Module System Monitoring and Fault Detection for Modular and Reconfigurable Robot

A Globally Exponentially Stable Observer for Torque Estimation with Only Position Measurement

A Novel Method to Improve the Accuracy of Torque Estimation for Robotic Joint with Harmonic Drive Transmission

A Novel Virtual Torque Sensor for Rescue Robots with Harmonic Drives

Torque sensor design for light weight arm joint

Modeling Of Torque Ripple For Integrated Robotic Joint

A Collision Detection System for an Assistive Robotic Manipulator